Isolation and Characterization of Two Types of Xyloglucanases from a Phytopathogenic Fungus,Verticillium dahliae

Xyloglucan is a major hemicellulosic component in plant cell walls. Phytopathogenic fungi secrete cell wall-degrading enzymes on their infection to hosts, while the nature of the cell wall-lytic enzymes of such fungi are yet to be fully understood. Verticillium dahliae is a soil-borne fungus that causes vascular wilt diseases in a variety of commercially important crops worldwide. We purified two types of xyloglucanases, XEG12A and XEG74B, from the culture of naturally isolated Verticillium dahliae strain 2148. XEG12A showed a molecular size of 23 kDa with its maximal activity at pH 7.5. XEG12A specifically hydrolyzed xyloglucan with no activity on other β-glucans. XEG74B had a molecular size of 110 kDa with its optimum pH at 6.0. XEG74B primarily hydrolyzed xyloglucan, with a slight activity on β-1,3-1,4-glucan. Analysis of hydrolytic products of xyloglucanooligasaccharide (XXXGXXXG) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) revealed that the both enzymes cleaved β-1,4-glucosidic linkage at the position of unbranched chain, while XEG74B showed a little fluctuation with the cleavage site. Both enzymes did not hydrolyzed xyloglucanoheptasaccharide (XXXG) at all. N-Terminal and internal amino acid sequencing of the enzymes revealed that XEG12A and XEG74B belonged to Glycoside Hydrolase (GH) Families 12 and 74, respectively. Based on these results we concluded that V. dahliae XEG12A and XEG74B were xyloglucan-specific endo-β-1,4-glucanases (EC 3.2.1.151).     

Preparation of porous membranes by selective decomposition of adamantane unit in ABA‐type triblock copolymer

The mechanism of pore formation by selective decomposition of adamantane unit in an ABA‐type triblock copolymer derived from 4,4‐(hexafluoroisopropylidene)diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) and poly(2‐methyl‐2‐adamantylmethacrylate) (PMAdMA) was investigated on this basis. This study aims to developing a novel method of material design for high‐precision gas separation membranes and application to electric devices by improving dielectric constant. Scanning electron microscopy images showed that the membrane structure changed considerably after heating; the difference increased with the increase in adamantane content. Interestingly, the internal structure of Block(36 mol%6FDA‐TeMPD/64 mol%PMAdMA) membrane was almost unchanged although its surface structure was changed. These results suggest that the mechanism of formation of porous membrane involves the decomposition of adamantane unit from surface. In addition, more adamantane units inside the membrane were discharged to the surface of the membrane through a path formed by decomposed adamantane units. POLYM. ENG. SCI., 56:1191–1200, 2016. © 2016 Society of Plastics Engineers     

Development of biobased microwave absorbing composites with various magnetic metals and carbons

The preparation and characterization of a biobased electromagnetic absorbing composites derived from natural lacquer as a renewable resource with microwave‐absorption fillers, including Ni–Zn ferrite and carbonyl iron (CI) as magnetic metals and soot and carbon nanotube (CNT) as carbon materials, were investigated in terms of the gel content, hardness, drying properties, and electromagnetic absorption properties. Interestingly, composites with ferrite and CI contained up to 320 and 550 wt %, respectively, of these compounds. This quite high loading capacity of the metal fillers in a natural‐lacquer base could have been due to the high compatibility between the filler and the natural lacquer; this indicated that the natural lacquer worked as a binder for these metals. The morphology of the biobased composite was characterized by scanning electron microscopy. The electromagnetic absorption properties of composites were characterized in the frequency range from 0.05 and 20 GHz by the reflection loss (RL) measurement method in terms of the kind of fillers and filler loading. The natural lacquer did not affect the absorption properties of the fillers. Biobased composites showed over 99% electromagnetic absorption in the frequency range 3.0–4.0 GHz for 280 wt % ferrite and 8.9–9.7 GHz for 200 wt % CI. Conversely, 10 and 20 wt % soot exhibited good performance (RL < ?20 dB) between 16.5 and 17.3 and between 8.8 and 9.2 GHz, respectively. The areas with RL values of less than ?20 dB of the CNT composites were 10.4–11.0 GHz for 5 wt % and 14.6–15.2 GHz for 10 wt %. Hence, natural lacquer can be used as a binder material for electromagnetic absorption composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44131.     

Boiling heat transfer characteristics of a sulfuric-acid flow in thermochemical iodine–sulfur cycle

The Japan Atomic Energy Agency has been conducting research and development on the thermo-chemical iodine–sulfur (IS) process, which is one of the most attractive water-splitting hydrogen production methods that uses nuclear thermal energy. The sulfuric acid decomposer is one of the key components of the IS process. The boiling heat transfer coefficients of sulfuric acid solutions are required to design the sulfuric acid decomposer. These coefficients were measured in aqueous solutions where the mole fraction of H₂O ranged from 0.17 to 0.37 (heat flux range from 16.9 kW/m² to 5.6 kW/m²) and compared with the empirical correlations formulated for binary mixtures. A combination of the Stephan–Körner correlation, using the empirical constant A₀ = 2.00, and the Nishikawa–Fujita correlation was used to predict the experimental results with an accuracy of ±10%.     

Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

A histochemical method using a substrate of beta-glucuronidase for detection of genetically modified papaya

A histochemical assay for detecting genetically modified (GM) papaya (derived from Line 55-1) is described. GM papaya, currently undergoing a safety assessment in Japan, was developed using a construct that included a beta-glucuronidase (GUS) reporter gene linked to a virus coat protein (CP) gene. Histochemical assay was used to visualize the blue GUS reaction product from transgenic seed embryos. Twelve embryos per fruit were extracted from the papaya seeds using a surgical knife. The embryos were incubated with the substrate 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (X-Gluc) in a 96-well microtiter plate for 10-15 hours at 37 degrees C. Seventy-five percent of GM papaya embryos should turn blue theoretically. The histochemical assay results were completely consistent with those from a qualitative polymerase chain reaction (PCR) method developed by this laboratory. Furthermore, the method was validated in a five-laboratory study. The method for detection of GM papaya is rapid and simple, and does not require use of specialized equipment.     

Numerical Study of the Performance of a Regenerative Furnace

In the present study, the numerical simulation of reactive turbulent flow and heat transfer in a regenerative gas-fired furnace has been carried out to investigate its performance. The effects of geometric and operating conditions on the performance of the furnace have also been studied. A moment closure method with an assumed g probability density function for mixture fraction is used in the present work to model the turbulent nonpremixed combustion process in the furnace. A comparison is made between the predicted results and the experimental data.