Construction of 8000 A class 275 kV gas insulated transmission line

Class-8000 A 275 kV gas insulated transmission lines (GIL), 138 m and 158 m long, were completed as getaway lines in the Shin Noda substation of the Tokyo Electric Power Co. Inc. in March and May 1988, respectively. The GILs were designed for large current capacity. New techniques used to construct these lines are described. Thermal expansion and contraction of a straight section of a GIL is absorbed by varying the angle of a deflection unit. Supports were designed to absorb a ground depression. GIL units were installed with gantry cranes. Joints of enclosures were welded by an automatic welding machine     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Development of a novel image intensifier of an amplifiedmetal-oxide semiconductor imager overlaid with electron-bombardedamorphous silicon

We developed a novel image intensifier (II) of an amplified metal-oxide-semiconductor (MOS) imager (AMI) overlaid with electron-bombarded (EB) amorphous silicon (a-Si). The electron bombardment gain (EB gain) was 1500 at an accelerating voltage of 10 kV. Since the multiplication process was free from a phosphorescent screen and a coupling fiber plate as in the conventional II, the resolution was high and the picture quality was good and free from granularity noises, white spots, lag and sticking. As for fatigue of X-ray irradiation, the contrasts of a vertical stripe (Smear) are not detectable and damaged areas in AMI are weak whereas both of those in charge-coupled devices (CCDs) are strong     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Detection of genetically modified organisms in foreign-made processed foods containing corn and potato

Investigations of the validity of labeling regarding genetically modified (GM) products were conducted using polymerase chain reaction (PCR) methods for foreign-made processed foods made from corn and potato purchased in the Tokyo area and in the USA. Several kinds of GM crops were detected in 12 of 32 samples of processed corn samples. More than two GM events for which safety reviews have been completed in Japan were simultaneously detected in 10 samples. GM events MON810 and Bt11 were most frequently detected in the samples by qualitative PCR methods. MON810 was detected in 11 of the 12 samples, and Bt11 was detected in 6 of the 12 samples. In addition, Roundup Ready soy was detected in one of the 12 samples. On the other hand, CBH351, for which the safety assessment was withdrawn in Japan, was not detected in any of the 12 samples. A trial quantitative analysis was performed on six of the GM maize qualitatively positive samples. The estimated amounts of GM maize in these samples ranged from 0.2 to 2.8%, except for one sample, which contained 24.1%. For this sample, the total amount found by event-specific quantitative analysis was 23.8%. Additionally, Roundup Ready soy was detected in one sample of 21 potato-processed foods, although GM potatoes were not detected in any sample.     

Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins

Natural rubber (NR) was blended in various ratios with 12 kinds of tackifiers that were prepared from petroleum. The blends were heated to various temperatures (20–120°C) to investigate their miscibility. The blends were visually observed for transparency or opacity at each temperature and further observed under an optical microscope for any existence of phase-separated structure. Miscibility of the blends is illustrated as phase diagrams in this article. NR/aliphatic resin systems and NR/aliphatic-aromatic copolymer systems showed phase diagrams of the lower critical solution temperature type, wherein the blends turned faintly cloudy over the binodal curves. The NR/hydrogenated petroleum resin system also showed a phase diagram of the lower critical solution temperature type. The miscible range of a blend system tends to become smaller as the molecular weight of a tackifier increases. Resins prepared by polymerization of pure aromatic monomers were completely immiscible with NR. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 221–229, 1998     

Reduction of droplet of tantalum oxide using double slit in pulsed laser deposition

We developed a double slit method in order to reduce droplets that were a problem in pulsed laser deposition (PLD) of tantalum oxide. The tantalum oxide films were deposited using KrF excimer laser ablation of a Ta target in 5 mass% O₃ at a pressure of 10 Pa. Stoichiometric and dense films with few droplets were obtained at a pressure of 10 Pa. Without double slit, as the laser pulses increased, the number of droplets containing rich metal on the film gets increased and its size became larger, and the surface morphology of the target also became more and more rugged. It was found that the number of droplet could be controlled by changing the initial roughness of the target. The number of droplets with a diameter size of under 1 μm was decreased to 1/10 of their sizes. Droplets larger than 3 μm, which mostly affect the corrosion resistance and hardly increase even beyond the laser pulses of 100 000. It is evident from this study that the double slit is a very effective method for reducing the droplets, which are otherwise a problem often seen in film production by PLD.     

Evaluation of R-curve behavior of ceramic-metal functionally graded materials by stable crack growth

This paper deals with the fracture toughness and R-curve behavior of ceramic-metal functionally graded materials (FGMs). A possibility of stable crack growth in a three-point-bending specimen is examined based on the driving force and resistance for crack growth in FGMs, and the distribution of fracture toughness or R-curve behavior is evaluated on FGMs fabricated by powder metallurgy using partially stabilized zirconia (PSZ) and stainless steel (SUS 304). The materials have a functionally graded surface layer (FGM layer) with a thickness of 1 mm or 2 mm on a SUS 304 substrate. Three-point-bending tests are carried out on a rectangular specimen with a very short crack in the ceramics surface. On the three-point-bending test, a crack is initiated from a short pre-crack in unstable manner, and then it propagates in stable manner through the FGM layer with an increase in the applied load. From the relationship between applied load and crack length during the stable crack growth in the FGM layer, the fracture toughness is evaluated. The fracture toughness increases with an increase in a volume fraction of SUS 304 phase.