Continuous ice slurry formation by using W/O emulsion with higher water content

A W/O (water-in-oil) emulsion was made from a water–lamp oil mixture with higher water content and a small amount of an additive of amino group-modified silicone oil, and the emulsion could be changed into an ice slurry by cooling with stirring. By using a new continuous ice formation system proposed by one of the authors of this paper, the ice slurry could be formed continuously and stably in an ice formation vessel made of stainless steel. From the experimental results, the conditions were clarified for realizing continuous ice formation for 10 h without ice adhesion to the cooling wall. Moreover, in order to propagate supercooling dissolution of the emulsion effectively and to decrease viscosity in the ice slurry, voltages were applied to the emulsion and ice slurry formed, respectively, and it was clarified that the voltage impression was effective for both.     

Structural Dynamics of C2F4I2 in Cyclohexane Studied via Time-Resolved X-ray Liquidography

The halogen elimination of 1,2-diiodoethane (C₂H₄I₂) and 1,2-diiodotetrafluoroethane (C₂F₄I₂) serves as a model reaction for investigating the influence of fluorination on reaction dynamics and solute–solvent interactions in solution-phase reactions. While the kinetics and reaction pathways of the halogen elimination reaction of C₂H₄I₂ were reported to vary substantially depending on the solvent, the solvent effects on the photodissociation of C₂F₄I₂ remain to be explored, as its reaction dynamics have only been studied in methanol. Here, to investigate the solvent dependence, we conducted a time-resolved X-ray liquidography (TRXL) experiment on C₂F₄I₂ in cyclohexane. The data revealed that (ⅰ) the solvent dependence of the photoreaction of C₂F₄I₂ is not as strong as that observed for C₂H₄I₂, and (ⅱ) the nongeminate recombination leading to the formation of I₂ is slower in cyclohexane than in methanol. We also show that the molecular structures of the relevant species determined from the structural analysis of TRXL data provide an excellent benchmark for DFT calculations, especially for investigating the relevance of exchange-correlation functionals used for the structural optimization of haloalkanes. This study demonstrates that TRXL is a powerful technique to study solvent dependence in the solution phase.     

Fabrication of micro-patterned TiO2 thin films incorporating Ag nanoparticles

A photosensitive TiO₂ thin film embedded with Ag nanoparticles has been prepared from a Ti(OBu)₄–acetylacetone solution, containing dispersed Ag nanoparticles, by the sol–gel method. UV–visible absorption spectra showed that the thin film obtained has two absorption bands, characteristic of the acetylacetone chelate rings and plasmon resonance from Ag nanoparticles. After the irradiation of UV light, the absorption band from the chelate rings almost disappeared, ascribed to structural changes associated with dissociation of the chelate rings. The thin film after the UV irradiation exhibited a broad absorption band in the IR spectrum, indicating that a Ti–O–Ti network was formed in the thin film. HRTEM and EDX spectra revealed that Ag nanoparticles were present and dispersed in the TiO₂ thin film. Micro-patterns of 50 μm dots have been fabricated by UV irradiation through a corresponding photomask, followed by leaching.     

Effects of Using Alternative Extreme Pressure (EP) and Anti-Wear (AW) Additives with Oxy-Nitrided Samples

Oxy-nitriding is a widely used industrial process aiming to improve the tribological properties and performance of components. Previous studies have shown the effectiveness of the treatment with friction and wear performance, but very few have focussed on optimising this behaviour. The lubrication properties of several EP and AW additives were examined to investigate their effectiveness in improving the tribological properties of the layers formed after treatment. Previous studies showed the presence of an oxide layer on the sample could improve the effectiveness of the sulphurised olefin (SO) and tricresyl phosphate (TCP) additives. The friction and wear behaviour of oxy-nitrided samples were analysed using a tribometer and surface profiler. Scanning electron microscope, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were employed to identify the morphologies and chemical compositions of the treated surface before and after testing. No real effect on friction was observed when using the SO or TCP additives, mostly due to lack of interaction with the less reactive iron nitride layer and their roles as anti-wear additives. However, when the zinc dialkyldithiophosphate-containing lubricant was used, a higher friction coefficient was observed. Greater improvements in anti-wear properties with the presence of additives in comparison with only using base oil were reported, with the TCP additive producing the lowest wear rates. The study effectively demonstrated that the additive package type used could impact the tribological and tribochemical properties of oxy-nitrided surfaces.     

Control of biodegradability of poly(3‐hydroxybutyric acid) film with grafting acrylic acid and thermal remolding

Radiation‐induced graft polymerization of acrylic acid (AAc) on poly(3‐hydroxybutyric acid) (PHB) film was carried out and the resulting film was thermally‐remolded. The PHB films grafted with AAc (PHB‐g‐AAc) having a degree of grafting higher than 5% completely lost the enzymatic degradability. The enzymatic degradability of the grafted film was recovered by thermal remolding. The highest enzymatic degradation rate was observed at degree of grafting of 10% after thermal remolding. The PHB‐g‐AAc films and thermally‐remolded PHB‐g‐AAc films were characterized by contact angle and differential scanning calorimetry. The enzymatic degradability of PHB‐g‐AAc films was lost by the grafted AAc, which covered the surface of PHB film. The acceleration of enzymatic degradation in the remolded PHB‐g‐AAc films was mainly caused by decrease of crystallinity of PHB by dispread of grafted AAc during thermal remolding. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3856–3861, 2006     

Site-specific electronic structure analysis by channeling EELS and first-principles calculations

Site-specific electronic structures were investigated by electron energy loss spectroscopy (EELS) under electron channeling conditions. The Al-K and Mn-L(2,3) electron energy loss near-edge structure (ELNES) of, respectively, NiAl2O4 and Mn3O4 were measured. Deconvolution of the raw spectra with the instrumental resolution function restored the blunt and hidden fine features, which allowed us to interpret the experimental spectral features by comparing with theoretical spectra obtained by first-principles calculations. The present method successfully revealed the electronic structures specific to the differently coordinated cationic sites.     

Can land use regulations and taxes help mitigate vehicular CO2 emissions? An empirical study of Japanese cities

This study advocates a multi-dimensional urban planning strategy to help combat climate change under local—and not national—policies. However, the literature does not provide adequate guidance to local governments seeking to enhance urbanization and in turn reduce vehicular carbon dioxide (CO₂) emissions. Therefore, this study sheds light on the effects of the following four urban planning instruments on vehicular CO₂ emissions: urbanization promoting areas, urbanization control areas, urban planning taxes and property taxes. Using Japanese city-level data from 1990 to 2010, we find that the two urbanization area planning instruments and the urban planning taxes help lower emissions by increasing population density in low-density cities and that property taxes help reduce emissions in high-density cities. However, the increased population density associated with these instruments can lead to other negative outcomes, including increased traffic accidents, increased crime and a decrease in the facility condition index. City governments should consider complementary policies to mitigate such negative outcomes when employing planning instruments aiming to increase population density.