Helical ordering of spins in a superconductor

The coexistence region of a superconducting phase and a helical ordering of localized spins is found within an isotropic model of free electrons and localized spins. Superconducting properties of this new phase are also studied. The experimental data regarding the superconducting-magnetic transition in ternary compounds are discussed.     

An analytical solution for the transient response in a diffusion cell of the Wicke-Kallenbach type

An analytical solution is developed for the problem of transient diffusion and first order reaction in a solid flanked by two well mixed fluid compartments. This solution is necessary and useful in describing unsteady-state measurements in a Wicke-Kallenbach diffusion cell or reaction studies in a single pellet reactor. It is shown that a proper choice of an inner product vector space, following the methodology developed by Ramkrishna and Amundson [14, 15], leads readily to the desired solution and guarantees its completeness. This solution is valid for the equivalent heat transfer problem also.     

Design characteristics of an aluminium-air battery with consumable wedge anodes

An attempt was made to optimize a mechanically rechargeable bipolar-cell battery, exemplified by an aluminium-air battery with self-perpetuating wedge anodes. The optimization involved current density of battery operation and some design parameters such as the anode thickness and the cell dimensions. It was shown that these parameters depend on the energy-to-power ratio selected by the user. The saline electrolyte aluminium-air battery was found to be essentially a low power-density/high energy-density power source. Energy densities of up to over 1500 W h kg^–1 are achievable for low power needs, indicating very long operations between recharging. It was also shown that aluminium should render significantly cheaper electric energy than any of the high-energy density metals.Nomenclature d anode plate thickness (cm) - d _p thickness of end-plates (cm) - d thickness of cell walls (cm) (see Fig. 1) - E energy density (W h kg^–1) - E _B total energy contained in the battery (k W h) - F the Faraday constant 26.8 A h mol^–1 - g _c weight of the air cathode per unit anode area (g cm^–2) - g _e excess electrolyte per unit electrode area (g cm^–2) - g _h weight of the hardware per unit anode area (g cm^–2) - g _m weight of metal per unit electrode area (g cm^–2) - _m g excess of unconsumable metal per unit electrode area (g cm^–2) - g ₀ sum of all the weights except that of consumable metal (g cm^–2) - g _ox weight of oxygen consumed withg _m (g cm^–2) - G total weight of battery (g) - G _m total amount of reserve metal per cell and per cm width (kg cm^–1) - G _m total weight of the wedges (kg) - G _r total weight of the reserve anode container except the metal (kg) - G free energy of oxidation of the metal (kW h mol^–1) - h _a height of the wedge (cm) - h _r reserve anode height (cm) - j current density (mA cm^–2) - J total current drawn from the battery (mA) - n number of electrolyte replacements between anode replacement - n _c number of cells in a battery - M atomic weight of the metal (kg mol^–1) - P power density (W kg^–1) - Q _e cost of metal in the cost of unit energy produced ($ kW^–1 h^–1) - Q _e ⁰ theoretical figure of merit of a metal ($ kW^–1 h^–1) - Q _m cost of metal per unit weight ($ kg^–1) - S _a total anode surface area (cm²) - U cell voltage without ohmic drop (V) - V cell voltage (V) - x width of battery (cm) - z number of electrons exchanged per atom of metal dissolved - interelectrode spacing (cm) - spacing between cover and top of a new reserve anode (cm) - _f material efficiency - _v voltage efficiency - _e conductivity of electrolyte (ohm^–1 cm^–1) - _e electrolyte density (g cm^–3) - _m density of metal (g cm^–3) - _p density of end-plates (g cm^–3) - _w density of cell-walls (g cm^–3)     

Multicomponent complexes of piroxicam with cyclodextrins and hydroxypropyl methylcellulose

The purpose of the study was to investigate the effect of hydroxypropyl methylcellulose (HPMC) on the complexation of piroxicam (PX) with β-cyclodextrin (β-CD) and dimethyl-β-cyclodextrin (DM-β-CD) in solution and in the solid state. Phase solubility study revealed a positive effect of the polymer on the drug complexation. Improvement in stability constants values, K_s, of ternary complexes clearly proves the benefit of the HPMC addition for promoting higher complexation efficiency. Solid binary and ternary complexes were prepared by spray drying. Drug-CD and drug-CD-polymer interactions were studied in the solid state by differential scanning calorimetry (DSC), zeta-potential measurements, and particle size distribution. A marked increase in the PX dissolution rate was observed even in binary and ternary complexes. The presence of HPMC in ternary complexes slightly retarded the release of PX. Cyclodextrin complexation increased the PX concentration gradient over the semipermeable membrane, resulting in an increased PX flux. The retarded diffusion of PX to the membrane interface decreased the PX flux values of the ternary complexes.     

Characterization of steel mill electric-arc furnace dust

In order to make a complete characterization of electric-arc furnace (EAF) dust, as hazardous industrial waste, and to solve its permanent disposal and/or recovery, bearing in mind both the volumes formed in the Croatian steel industry and experiences of developed industrial countries, a study of its properties was undertaken. For this purpose, samples of EAF dust, taken from the regular production process in the Zeljezara Sisak Steel Mill between December 2000 and December 2001, were subjected to a series of tests. The chemical composition of EAF dust samples was investigated by means of a several different analytical methods. The results from the chemical analysis show that the approximate order of abundance of major elements in EAF dusts is as follows: Fe, Zn, Mn, Ca, Mg, Si, Pb, S, Cr, Cu, Al, C, Ni, Cd, As and Hg. Granular-metric composition of single samples was determined by applying sieve separation. Scanning electron micro-structural examination of EAF dust microstructure was performed and results indicated that all twelve EAF dusts were composed of solid spherical agglomerates with Fe, Zn, Pb, O, Si and Ca as the principal element. The investigation of grain morphology and the mineralogical composition of EAF dust were taken by combination of high resolution Auger electron spectroscopy (HR AES), X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction analysis. The analysis of XPS-spectra determined the presence of zinc in the form of ZnO phase and the presence of lead in the form of PbO phase, i.e. PbSO3/PbSO4 forms. The results of the X-ray diffraction phase analysis show that the basis of the examined EAF dust samples is made of a mixture of metal oxides, silicates and sulphates. The metal concentration, anions, pH value and conductivity in water eluates was determined in order to define the influence of EAF dust on the environment.     

Fibonacci Arithmetic Expressions

In this paper, we extend the arithmetic (AR) expressions for functions on finite dyadic groups to functions used in Fibonacci interconnection topologies. We have introduced the Fibonacci-Arithmetic (FibAR) expressions for representation of these functions. We discussed the optimization of FibARs with respect to the number of non-zero coefficients through the Fixed-Polarity FibARs defined by using different polarities for the Fibonacci variables. In this way, we provide a base to extend the application of ARs and related powerful CAD design tools for switching functions to functions in Fibonacci interconnection topologies.     

On the Number of Digital Discs

A digital disc is defined as the set of all integer points inside of a given real disc. In this paper we show that there are no more than

Chemical dosimetry system for criticality accidents

Ruder Boskovi? Institute (RBI) criticality dosimetry system consists of a chemical dosimetry system for measuring the total (neutron + gamma) dose, and a thermoluminescent (TL) dosimetry system for a separate determination of the gamma ray component. The use of the chemical dosemeter solution chlorobenzene-ethanol-trimethylpentane (CET) is based on the radiolytic formation of hydrochloric acid, which protonates a pH indicator, thymolsulphonphthalein. The high molar absorptivity of its red form at 552 nm is responsible for a high sensitivity of the system: doses in the range 0.2-15 Gy can be measured. The dosemeter has been designed as a glass ampoule filled with the CET solution and inserted into a pen-shaped plastic holder. For dose determinations, a newly constructed optoelectronic reader has been used. The RBI team took part in the International Intercomparison of Criticality Accident Dosimetry Systems at the SILENE Reactor, Valduc, June 2002, with the CET dosimetry system. For gamma ray dose determination TLD-700 TL detectors were used. The results obtained with CET dosemeter show very good agreement with the reference values.     

Measurements of environmental background radiation at location of coal-fired power plants

Environmental radiation monitoring in the vicinity of coal-fired power plants which are used primarily to determine the variability in measured background exposures are presented in this article; this is in order to estimate the contribution due to the plants' operation. Measurements have been done using a multi-element, high sensitive dosemeter system composed of three solid, properly filtered, sintered CaSO4:Dy thermoluminescent detectors, and one low-atomic number, MgB4O7:Dy,Na thermoluminiscencent detector produced at the Vinca Institute. The dosemeters were deployed quarterly 1 m above ground level at locations within 20 km of the power plants. Twenty urban and suburban measured stations were established. Measurements were carried out over one year period, from the beginning of the summer of 1995 to the end of the spring of 1996. The registered annual absorbed dose in air, from all of the 20 stations, vary from 0.91 to 1.46 mGy a(-1). One of the highest values of the annual absorbed dose was measured at the station near to the plant, i.e. at the place the most exposed to the lighter fly ash from the plant stack, as it was expected. The annual absorbed dose registered at the measuring stations that were selected as a control because they were situated practically away from possible influence of the plants were from 0.91 to 0.98 mGy a(-1). The above values of absorbed doses become very important, by concurrence of the circumstances, because they represent the zero background radiation level before the incidence of depleted uranium over former Yougoslav territory in the Kosovo region in the spring of 1999. These measured absorbed dose exposures have to be compared with corresponding absorbed dose rates from the natural sources, such as soil having an exposure of 18-93 nGy h(-1) (average 35 nGy h(-1)) according to the UNSCEAR 2000 Report. This investigation has been primarily done in order to check the impact of coal-fired power plants on the background radiation level in its vicinity. According to the experimental results, influence was confirmed both qualitatively and quantitatively.     

The effect of pulsating potential electrolysis on the porosity of metal deposits

Measurements of the porosity of nickel deposits on steel, obtained by pulsating potential electrolysis, have been performed. The porosity of the nickel deposits and the effective overpotentials have been determined as a function of frequency of pulsating potential for selected values of effective current densities. A qualitative discussion of the effect of pulsating potential on the porosity of metal deposits has been presented and the optimum electrolysis conditions have been established.Presented at the 19th meeting of the Serbian Chemical Society, Beograd, January 1975.