Some observations from interrupted lifetest of GaInAsP/InP inverted-rib laser diodes

Conventionally, lifetests of semiconductor laser diodes usually involved operating the devices continuously at either constant power output or drive current, with periodic recording of their characteristics. In this paper, some effects arising from interrupted lifetest of 1.3 m GaInAsP-InP inverted-rib laser diodes are reported. This unconventional lifetest method involves constant power biasing at 4 mW/facet and 8 mW/facet respectively at 50°C, followed by a period during which the lifetest is interrupted and the devices left unbiased at room temperature. Subsequently, the devices were put back on constant power biasing at 50°C. Among a number of parameters, pronounced reduction in the threshold current, current for 4 mW/facet and 8 mW/facet were observed, indicating strong recovery effects commencing from the time when the life-test was interrupted. Redistribution of mobile defects in the cladding layer is postulated to be the cause of the degradation recovery, and the data supports the occurrence of an aging-current dependent defect annihilation mechanism. Such recovery effects have so far been observed to occur only in the GaInAsP-InP inverted-rib devices.     

Highly stable optical add/drop multiplexer using polarization beam splitters and fiber Bragg gratings

We demonstrate a novel wavelength-division add/drop multiplexer employing fiber Bragg gratings and polarization beam splitters. The multiplexer is easy to fabricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5-Gb/s-per-channel wavelength-division multiplexing (WDM) transmission system.     

Fabrication of V-grooved inner stripe GaAs-AlGaAs quantum-wire lasers

V-grooved inner stripe (VIS) GaAs-AlGaAs quantum-wire (QWR) lasers were successfully fabricated by, combining two-step metalorganic chemical vapor deposition (MOCVD) growth with a wet-etching technique. In order to achieve low threshold current density and high reliability, a conductive stripe width (W), a thickness (t/sub p-CBL/), and a doping concentration (n/sub p-CBL/) of the p-GaAs current-blocking layer (CBL) were determined to be W=1.2 /spl mu/m, t/sub p-CBL/=2 /spl mu/m, and n/sub p-CBL/=1/spl times/10/sup 18/ cm/sup -3/. The leakage currents passing through the CBL were also estimated using a modified P-SPICE. Thus far, a threshold current of 45 mA and an output power of 4 mW at 51 mA have been achieved under room-temperature pulsed operation for some devices with uncoated facets.     

VLSI array algorithms and architectures for RSA modularmultiplication

We present two novel iterative algorithms and their array structures for integer modular multiplication. The algorithms are designed for Rivest-Shamir-Adelman (RSA) cryptography and are based on the familiar iterative Horner's rule, but use precalculated complements of the modulus. The problem of deciding which multiples of the modulus to subtract in intermediate iteration stages has been simplified using simple look-up of precalculated complement numbers, thus allowing a finer-grain pipeline. Both algorithms use a carry save adder scheme with module reduction performed on each intermediate partial product which results in an output in carry-save format. Regularity and local connections make both algorithms suitable for high-performance array implementation in FPGA's or deep submicron VLSI. The processing nodes consist of just one or two full adders and a simple multiplexor. The stored complement numbers need to be precalculated only when the modulus is changed, thus not affecting the performance of the main computation. In both cases, there exists a bit-level systolic schedule, which means the array can be fully pipelined for high performance and can also easily be mapped to linear arrays for various space/time tradeoffs     

CDMA Mobile System Testbed and Field Test

This paper briefly explains the configuration of CDMA Mobile System (CMS) test bed. The measured fading and delay results of CDMA signal in Taejon area are shown. In comparison to other cellular systems, there are more parameters in the CDMA systems that affect system performance and capacity. We performed the optimization test of the selected parameters and present the effect of each parameter on the performance. This paper presents the capacity and performance test results of CMS. The capacity test was performed on ETRI site of three sectors in Taejon area. The performance tests include call completion rate, busy hour call attempt, and the delay characteristics of voice.     

All‐Solution‐Processed Indium‐Free Transparent Composite Electrodes based on Ag Nanowire and Metal Oxide for Thin‐Film Solar Cells

Fully solution‐processed Al‐doped ZnO/silver nanowire (AgNW)/Al‐doped ZnO/ZnO multi‐stacked composite electrodes are introduced as a transparent, conductive window layer for thin‐film solar cells. Unlike conventional sol–gel synthetic pathways, a newly developed combustion reaction‐based sol–gel chemical approach allows dense and uniform composite electrodes at temperatures as low as 200 °C. The resulting composite layer exhibits high transmittance (93.4% at 550 nm) and low sheet resistance (11.3 Ω sq^‐1), which are far superior to those of other solution‐processed transparent electrodes and are comparable to their sputtered counterparts. Conductive atomic force microscopy reveals that the multi‐stacked metal‐oxide layers embedded with the AgNWs enhance the photocarrier collection efficiency by broadening the lateral conduction range. This as‐developed composite electrode is successfully applied in Cu(In_1‐x,Ga_x)S₂ (CIGS) thin‐film solar cells and exhibits a power conversion efficiency of 11.03%. The fully solution‐processed indium‐free composite films demonstrate not only good performance as transparent electrodes but also the potential for applications in various optoelectronic and photovoltaic devices as a cost‐effective and sustainable alternative electrode.     

Open‐Ended Waveguide Antenna Using a Single Split‐Ring Resonator

This letter proposes an open‐ended waveguide antenna with a single split‐ring resonator. In contrast to the waveguide antennas incorporating multiple rings reported in a previous study, which exhibited narrow bandwidth, the proposed antenna uses only one ring to achieve broader bandwidth while keeping the aperture small. A single ring has a relatively low quality factor compared to multiple rings. The simulated and measured fractional bandwidth was 4.13% and 4.03%, respectively, which is much broader than the fractional bandwidth of about 1% demonstrated in a previous study. This simple technique can be used in many applications that require small apertures including near‐field probes and array elements.     

QoS provisioning dynamic connection-admission control for multimedia wireless networks using a Hopfield neural network

This paper presents a quality-of-service (QoS) provisioning dynamic connection-admission control (CAC) algorithm for multimedia wireless networks. A multimedia connection consists of several substreams (i.e., service classes), each of which presets a range of feasible QoS levels (e.g., data rates). The proposed algorithm is mainly devoted to finding the best possible QoS levels for all the connections (i.e., QoS vector) that maximize resource utilization by fairly distributing wireless resources among the connections while maximizing the statistical multiplexing gain (i.e., minimizing the blocking and dropping probabilities). In the case of congestion (overload), the algorithm uniformly degrades the QoS levels of the existing connections (but only slightly) in order to spare some resources for serving new or handoff connections, thereby naturally minimizing the blocking and dropping probabilities (it amounts to maximizing the statistical multiplexing gain). The algorithm employs a Hopfield neural network (HNN) for finding a QoS vector. The problem itself is formulated as a multi-objective optimization problem. Hardware-based HNN exhibits high (computational) speed that permits real time running of the CAC algorithm. Simulation results show that the algorithm can maximize resource utilization and maintain fairness in resource sharing, while maximizing the statistical multiplexing gain in providing acceptable service grades. Furthermore, the results are relatively insensitive to handoff rates.