ZSM-5 Supported Cobalt Catalyst for the Direct Production of Gasoline Range Hydrocarbons by Fischer–Tropsch Synthesis

Abstract  

Fischer–Tropsch synthesis (FTS) reaction for the direct production of gasoline range hydrocarbons (C₅–C₉) from syngas was investigated on cobalt-based FTS catalyst supported on the ZSM-5 possessing a four different Si/Al ratio. The FTS catalysts were prepared by impregnation method using cobalt nitrate precursor in a slurry of ZSM-5, and they were characterized by surface area, XRD, H₂-TPR and NH₃-TPD. Cobalt supported catalyst on ZSM-5 having a low Si/Al ratio of 15 was found to be superior to the other catalysts in terms of better C₅–C₉ selectivity due to the formation of small cobalt particle and the presence of larger number of weak acidic sites. It also exhibited the highest catalytic activity because of the higher reducibility and the small cobalt particle size.     

Synthesis of Highly Active Nano-Sized Pt/CeO<Subscript>2</Subscript> Catalyst via a Cerium Hydroxy Carbonate Precursor for Water Gas Shift Reaction

Abstract  

A novel precipitation/digestion route has been developed to synthesize crystalline cerium hydroxy carbonate (CHC: Ce(OH)CO₃) by using an equimolar quantity of cerium nitrate (Ce(NO₃)₃·6H₂O) and mixed precipitants (KOH + K₂CO₃) at room temperature. Nano-sized CeO₂ supports could be prepared by the pre-calcination of CHC at 400 °C for 4 h. A highly active water gas shift (WGS) catalyst, 1 wt.% Pt/CeO₂ catalyst showed almost equilibrium CO conversion with 100% CO₂ selectivity at 320 °C even at the gas hourly space velocity (GHSV) of 45,625 h⁻¹.     

Synthesis of ultra-thin polypyrrole nanosheets for chemical sensor applications

Ultra-thin polypyrrole nanosheets (UPNSs) are fabricated by organic crystal surface-induced polymerization (OCSP) of pyrrole in an aqueous suspension containing hydrated crystals of sodium decylsulfonate (C₁₀SO₃Na) below the Krafft temperature using FeCl₃ as an oxidant. The hydrated C₁₀SO₃Na crystals are used as templates through electrostatic binding of the cationic polypyrrole (PPy) chains oxidized by Fe(III) ions on the anionic C₁₀SO₃Na crystal surface. The resulting UPNSs have a single layer thickness of ∼21 nm, widths between 2 and 6 μm, and lengths greater than 10 μm. The UPNSs are composed of a single continuous PPy domain. Moreover, the UPNSs exhibit higher conductivity (30.6 Scm⁻¹) and longer conjugation lengths than the PPy nanoparticles (2.4 Scm⁻¹) prepared using emulsion polymerization. We systematically investigate the UPNSs as gas sensors for detecting and quantifying toxic gases such as HCl and NH₃. The UPNSs exhibit much higher gas sensitivity and faster response times compared with the PPy nanoparticles.     

Effects of TS-1 zeolite structures on physical properties and enzymatic degradation of Poly (butylene succinate) (PBS)/TS-1 zeolite hybrid composites

The objective of this study was to investigate how the water uptake features and carrier characteristics of the TS-1 zeolite affected the physical and rheological properties, morphological parameters, and enzymatic hydrolysis of Poly (butylene succinate) (PBS). The introduction of TS-1 zeolite as catalyst was developed for the preparation of PBS/TS-1 zeolite hybrid composites (PTHC) without heavy metal toxic substance in the context on clean technology. The TS-1 zeolite can act as a catalyst as well as a reinforcement filler with the result that PTHC can show marked increases in tensile properties and elongation at breakage in the solid state. The rheological properties of PTHC with high zeolite contents showed low values of complex viscosity, as compared with PTHC with low TS-1 zeolite contents, due to the volatilization of water released from the zeolite pores during esterification. The introduction of the TS-1 zeolite in the PBS matrix was not significantly affected by changes in the size of the long period, lamella thickness, or the amorphous region, indicating that PBS chains do not penetrate into zeolite pores, as confirmed by SAXS profiles. In enzymatic hydrolysis over 90 days, the enzymatic hydrolysis rates of PTHC significantly accelerated with increasing TS-1 zeolite contents, compared with Homo PBS. This result indicated that TS-1 zeolite can act as a carrier for enzyme activation, resulting in enzymatic hydrolysis, occurring from the amorphous area on the surface into the inside of the film.     

Anti-reflective nano- and micro-structures on 4H-SiC for photodiodes

In this study, nano-scale honeycomb-shaped structures with anti-reflection properties were successfully formed on SiC. The surface of 4H-SiC wafer after a conventional photolithography process was etched by inductively coupled plasma. We demonstrate that the reflection characteristic of the fabricated photodiodes has significantly reduced by 55% compared with the reference devices. As a result, the optical response I _illumination/I _dark of the 4H-SiC photodiodes were enhanced up to 178%, which can be ascribed primarily to the improved light trapping in the proposed nano-scale texturing.     

Potential application of microporous structured poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separators to high-voltage and high-power lithium-ion batteries

We demonstrate potential application of a new composite non-woven separator, which is comprised of a phase inversion-controlled, microporous polyvinylidene fluoride-hexafluoropropylene (PVdF-HFP) gel polymer electrolyte and a polyethylene terephthalate (PET) non-woven support, to high-voltage and high-power lithium-ion batteries. In comparison to a commercialized polyethylene (PE) separator, the composite non-woven separator exhibits distinct improvements in microporous structure and liquid electrolyte wettability. Based on the understanding of the composite non-woven separator, cell performances of the separator at challenging charge/discharge conditions are investigated and discussed in terms of ion transport of the separator and AC impedance of the cell. The aforementioned advantageous features of the composite non-woven separator play a key role in providing facile ion transport and suppressing growth of cell impedance during cycling, which in turn contribute to superior cell performances at harsh charge/discharge conditions such as high voltages and high current densities.     

Covalent immobilization of nisin on multi-walled carbon nanotubes: superior antimicrobial and anti-biofilm properties

Despite unique and useful properties of multi-walled carbon nanotubes (MWNTs) such as high strength and a low synthesis cost, their weak antimicrobial property hampers their use as an antimicrobial material. Herein, we demonstrate that the immobilization of nisin, a natural and inexpensive antimicrobial peptide, with poly(ethylene glycol) (PEG(1000)) as a linker significantly enhanced the antimicrobial and anti-biofilm properties of MWNTs. The MWNT-nisin composite showed up to 7-fold higher antimicrobial property than pristine MWNTs against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis. Moreover, the MWNT-nisin composite had a dramatically improved capability to prevent biofilm formation both on a deposited film and in suspension. In particular, the MWNT-nisin deposit film exhibited a 100-fold higher anti-biofilm property than the MWNT deposit film. Further, it has been shown that PEG and nisin are covalently attached to MWNTs with excellent stability against leaching. We envision that our novel MWNT-nisin composite can serve as an effective and economical antimicrobial material.     

Synthesis and properties of polyurethane‐urea‐based liquid bandage materials

To obtain ideal liquid bandage polymer materials, a series of polyurethane‐urea dispersions were synthesized from 4,4′‐diisocyanato dicyclohexylmethane (H₁₂MDI) and ethylene diamine with different molar ratio of polyol blend [polyethylene glycol (PEG, M_n = 2000 g/mol)/hydroxy terminated poly(dimethylsiloxane) (PDMS, M_n = ～ 550 g/mol)] and acetone/ethanol as a solvent. The effect of PDMS content in PEG/PDMS on the viscosity, mechanical properties, water contact angle/surface energy, insolubility in water (%), water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of polyurethane‐urea films was investigated. As PDMS content increased, the water contact angle, insolubility in water, and tensile strength/elastic recovery of film sample increased; however, the surface energy, water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of film sample decreased. By a wound‐healing evaluation using a full‐thickness rat model experiment, it was found that a wound covered with a typical polyurethane‐urea liquid bandage film (PD2 sample) was filled with new epithelium without any significant adverse reactions. These results suggest that the polyurethane‐urea‐based liquid bandages (samples: PD2 and PD3) prepared in this study may have high potential as new wound dressing materials, which provide and maintain the adequate wet environment required to prevent scab formation and dehydration of the wound bed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Purification and enzymatic properties of the extracellular and constitutive chitosanase produced by Bacillus subtilis RKY3

BACKGROUND: Purification and enzymatic properties of a chitosanase from Bacillus subtilis RKY3 have been investigated to produce a chitooligosaccharide. The enzyme reported was extracellular and constitutive, which was purified by two sequential steps including ammonium sulfate precipitation and ion exchange chromatography. RESULTS: Sodium dodecyl sulfate‐polyacrylamide gel electrophoresis of the purified chitosanase revealed one single band corresponding to a molecular weight of around 24 kDa. The highest chitosanase activity was found to be at pH 6.0 and at 60 °C. Although the mercaptide forming agents such as Hg²⁺ (10 mmol L^?1) and p‐hydroxymercuribenzoic acid (1 mmol L^?1, 10 mmol L^?1) significantly or totally inhibited the enzyme activity, its activity was enhanced by the presence of 10 mmol L^?1 Mn²⁺. The enzyme showed activity for hydrolysis of soluble chitosan and glycol chitosan, but colloidal chitin, carboxymethyl cellulose, crystalline cellulose, and soluble starch were not hydrolyzed. The analysis of chitosan hydrolysis by thin‐layer chromatography and viscosity variation revealed that the purified enzyme should be endosplitting‐type chitosanase. CONCLUSION: The chitosanase produced by Bacillus subtilis RKY3 was a novel chitosanlytic enzyme with relatively low molecular weight, which is a versatile enzyme for chitosan hydrolysis because it could hydrolyze soluble chitosan into a biofunctional oligosaccharide at a high level. Copyright © 2011 Society of Chemical Industry