Effects of TRI-n-butyl phosphate on pregnancy in rats

A teratological study was carried out on the plasticizer tri-n-butyl phosphate (TBP). Pregnant Wistar rats were treated orally on days 7-17 of gestation with TBP at 0, 100, 200, 400 or 800 mg/kg/day in the dose-finding study and 0, 62.5, 125, 250 or 500 mg/kg/day in the subsequent teratological study. Caesarean sections were performed on day 20 of gestation. In the dose-finding study, all of the pregnant rats were killed by the treatment with TBP at 800 mg/kg/day. In the teratological study, salivation and depression of body weight gain, adjusted body weight gain and food consumption were observed at the higher doses of TBP. There were no significant differences between the groups in the incidence of dead or resorbed foetuses, the number of living foetuses and the body weights of living foetuses of both sexes. The incidence of rudimentary lumbar rib increased significantly at 500 mg/kg/day. There were two cases of malformation: a foetus with deformity of fore- and hind-limbs at 400 mg/kg/day in the dose-finding study and conjoined twins exhibiting three fore-limbs and four hind-limbs at 125 mg/kg/day in the teratological study. These malformations were rare in the background data of teratology, and the incidence of foetuses with malformations was not increased significantly. Therefore, TBP was considered not to be teratogenic in this study.     

Cytochrome P450 1B1 mRNA levels in peripheral blood cells and exposure to polycyclic aromatic hydrocarbons in Chinese coke oven workers

Cytochrome P450 1B1 (CYP1B1) is induced through the Ah receptor and is involved in the activation of polycyclic aromatic hydrocarbons (PAHs). To determine the validity of a quantitative analysis of CYP1B1 mRNA in peripheral human blood cells for the estimation of PAH exposure, a real-time quantitative polymerase chain reaction method was used to measure the relative levels of CYP1B1 mRNA in 37 Chinese coke oven workers and 13 control workers. A large inter-individual difference in the levels was observed. The average level of the CYP1B1 mRNA in workers at the top work site, where the PAH exposure level from the coke ovens was highest, was significantly higher than in workers at the middle site (P<0.01) or the controls (P=0.02). A non-significant positive correlation was found between the CYP1B1 mRNA levels and urinary 1-hydroxypyrene (R=0.22, P=0.13), and a significant correlation between these mRNA levels and urinary cotinine (R=0.33, P=0.02). It was interesting that a significant positive correlation between CYP1B1 mRNA and 1-hydroxypyrene was observed in subjects with the Leu/Leu type of CYP1B1 Leu432Val polymorphism (R=0.33, P=0.02, n=38) and a non-significant correlation in subjects with the Leu/Val and Val/Val types (R=-0.36, P=0.25, n=12), although the number of subjects in this strata analysis was small. Our preliminary study suggests that PAH exposure in coke ovens and smoking maybe associated with CYP1B1 mRNA levels in peripheral blood cells although mRNA is generally unstable and could be expressed following exposure to other agents.     

Development of multicomponent vaporization/condensation model for a reactor safety analysis code SIMMER-III: Theoretical modeling and basic verification

It is believed that the numerical simulation of thermal-hydraulic phenomena of multiphase, multicomponent flows in a reactor core is essential to investigate core disruptive accidents (CDAs) of liquid-metal fast reactors. A new multicomponent vaporization/condensation (V/C) model was developed to provide a generalized model for a fast reactor safety analysis code SIMMER-III, which analyzes relatively short-time-scale phenomena relevant to accident sequences of CDAs. The model characterizes the V/C process associated with phase transition through heat-transfer and mass-diffusion limited models to follow the time evolution of the reactor core under CDA conditions. The heat-transfer limited model describes the nonequilibrium phase-transition processes occurring at interfaces, while the mass-diffusion limited model is employed to represent effects of noncondensable gases and multicomponent mixture on V/C processes. Verification of the model and method employed in the multicomponent V/C model of SIMMER-III was performed successfully by analyzing a series of multicomponent phase-transition experiments.     

Swelling of hydrophilic polymers. II

The swelling of five types of Sephadex that are either nonionic (G) or possess one of four different ionic groups [sodium carboxymethyl (CM), sodium sulfopropyl (SP), diethyl-aminoethyl chloride (DEAE), diethyl - (2-hydroxypropyl) aminoethyl chloride (QAE)] in the same skeleton of the molecule has been studied by picture analysis and by calorimetry. Inducing dissociation of the ionic group in the polymer skeleton increased the water swelling. By the addition of sodium chloride, the maximum swelling volume of nonionic Sephadex was only slightly decreased. However, that of ionic polymers was considerably decreased. The variation of the apparent first-order rate constant of the swelling and that of the maximum swelling volume show the same tendency. The maximum heats of swelling were 93.2 ± 7.1 J g^?1 for G, 128.8 ± 9.1 J g^?1 for CM, 92.3 ± 8.0 J g^?1 for SP, 68.8 ± 10.5 J g^?1 for DEAE, and 67.0 ± 7.2 J g^?1 for QAE and did not depend on the concentration of sodium chloride. From the results obtained, we conclude that the nonionic Sephadex swells only by hydration but that ionic Sephadexes swell mainly by the osmotic pressure due to the counterions of the ionic groups and that the swelling ratio is not dependent on the kinds of ions but on the ionic concentration. Most of the water in the gels of ionic Sephadexes is free water that does not interact with the Sephadexes. © 1993 John Wiley & Sons, Inc.     

Development of a three-dimensional CDA analysis code: SIMMER-IV and its first application to reactor case

For the transition phase analysis of core disruptive accidents, the development of a three-dimensional reactor safety analysis code, SIMMER-IV, has been carried out based on the technology of the two-dimensional SIMMER-III code. The world first application of SIMMER-IV to a small-sized sodium-cooled fast reactor has also been attempted to clarify event progression in the early stage of the transition phase. This SIMMER-IV calculation is compared to the two-dimensional case calculated by SIMMER-III, neglecting the presence of control rod guide tubes. The present analysis with the three-dimensional representation suggests that the conventional scenario leading to rather early high-mobility fuel pool formation is unrealistic and the degraded core tends to keep low mobility in the early stage of transition phase.     

Is there a protease that preferentially cleaves the M-line in partially dehydrated muscle?

When a partially dehydrated muscle fibre bundle (PDM, 65% H(2)O, pH 5.5, at 4 °C) was treated with a supernatant fraction (M-line-cleaving fraction: MCF) of muscle homogenate for 5 hr, the M-lines disappeared. MCF was extracted from rabbit skeletal muscles by homogenization with 15 mM HCl containing 0.5 M NaCl (pH 3.7), fractionated with 25-65% (NH(4))(2)SO(4) and clarified by Sephadex G-75. Rabbit psoas PDM was obtained with an osmotic dehydration sheet and glycerinated. One end of the bisected fibre bundle was incubated with 10 mM Na-acetate (pH 5.5), 1 mM EDTA, 5 mM β-mercaptoethanol (β-MCE), 150 mM KCl, 10 mM NaN(3) with MCF at 25 °C for 5 hr, the muscle being stretched and relaxed several times. The other end was incubated in the same solution, except that MCF was omitted (control). Electron microscopy showed the myofibrils broken down at the M-line in the presence of MCF. The myofilaments were closely packed near the Z-line and flared out at both ends near the centre of the sarcomere (bow-tie shape). Thus, the Z-line is not the only target of proteases and structural decomposition can also occur at the M-line under specific conditions. An M-line cleaving protease may exist in the MCF muscle extract.     

Synthesis, thermal and mechanical properties and biodegradation of branched polyamide 4

A series of linear and branched polyamide 4 were prepared and characterized in order to study the effect of the structure on thermal and mechanical properties. Polybasic acid chlorides were effective initiators for the synthesis of the branched polyamide 4. The melting points of the polyamide 4 for the high molecular weight region were near 265 °C and showed no significant difference depending on their chain structure. On the other hand, it was found that the branched polyamide 4 showed remarkable increase of tensile strength, compared to similar molecular weight of the linear polyamide 4 (e.g. four-branched type M_w=9.28×10⁴, tensile strength=72 MPa).When the initiator having branched structure were used, gel was also formed at the initiator concentration over a certain value (e.g. 3.0 mol% for 4-branched type).The biodegradation of the branched polyamide 4 was evaluated using a standard activated sludge (e.g. four-branched type M_w=8.25×10⁴, biodegradation 41%).