A 0.25-/spl mu/m CMOS quad-band GSM RF transceiver using an efficient LO frequency plan

This paper describes a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS applications. It is the most important design issue to maximize resource sharing and reuse in designing the multiband transceivers. In particular, reducing the number of voltage-controlled oscillators (VCOs) required for local oscillator (LO) frequency generation is very important because the VCO and phase-locked loop (PLL) circuits occupy a relatively large area. We propose a quad-band GSM transceiver architecture that employs a direct conversion receiver and an offset PLL transmitter, which requires only one VCO/PLL to generate LO signals by using an efficient LO frequency plan. In the receive path, four separate LNAs are used for each band, and two down-conversion mixers are used, one for the low bands (850/900 MHz) and the other for the high bands (1800/1900 MHz). A receiver baseband circuit is shared for all four bands because all of their channel spaces are the same. In the transmit path, most of the building blocks of the offset PLL, including a TX VCO and IF filters, are integrated. The quad-band GSM transceiver that was implemented in 0.25-/spl mu/m CMOS technology has a size of 3.3/spl times/3.2 mm/sup 2/, including its pad area. From the experimental results, we found that the receiver provides a maximum noise figure of 2.9 dB and a minimum IIP3 of -13.2dBm for the EGSM 900 band. The transmitter shows an rms phase error of 1.4/spl deg/ and meets the GSM spectral mask specification. The prototype chip consumes 56 and 58 mA at 2.8 V in the RX and TX modes, respectively.     

Board-level reliability of Pb-free solder joints of TSOP and various CSPs

To evaluate various Pb-free solder systems for leaded package, thin small outline packages (TSOPs) and chip scale packages (CSPs) including leadframe CSP (LFCSP), fine pitch BGA (FBGA), and wafer level CSP (WLCSP) were characterized in terms of board level and mechanical solder joint reliability. For board level solder joint reliability test of TSOPs, daisy chain samples having pure-Sn were prepared and placed on daisy chain printed circuit board (PCB) with Pb-free solder pastes. For CSPs, the same composition of Pb-free solder balls and solder pastes were used for assembly of daisy chain PCB. The samples were subjected to temperature cycle (T/C) tests (-65/spl deg/C/spl sim/150/spl deg/C, -55/spl deg/C/spl sim/125/spl deg/C, 2 cycles/h). Solder joint lifetime was electrically monitored by resistance measurement and the metallurgical characteristics of solder joint were analyzed by microstructural observation on a cross-section sample. In addition, mechanical tests including shock test, variable frequency vibration test, and four point twisting test were carried out with daisy chain packages too. In order to compare the effect of Pb-free solders with those of Sn-Pb solder, Sn-Pb solder balls and solder paste were included. According to this paper, most Pb-free solder systems were compatible with the conventional Sn-Pb solder with respect to board level and mechanical solder joint reliability. For application of Pb-free solder to WLCSP, Cu diffusion barrier layer is required to block the excessive Cu diffusion, which induced Cu trace failure.     

Adaptive image denoising using scale and space consistency

This paper proposes a new method for image denoising with edge preservation, based on image multiresolution decomposition by a redundant wavelet transform. In our approach, edges are implicitly located and preserved in the wavelet domain, whilst image noise is filtered out. At each resolution level, the image edges are estimated by gradient magnitudes (obtained from the wavelet coefficients), which are modeled probabilistically, and a shrinkage function is assembled based on the model obtained. Joint use of space and scale consistency is applied for better preservation of edges. The shrinkage functions are combined to preserve edges that appear simultaneously at several resolutions, and geometric constraints are applied to preserve edges that are not isolated. The proposed technique produces a filtered version of the original image, where homogeneous regions appear separated by well-defined edges. Possible applications include image presegmentation, and image denoising.     

Visual Cryptography Based on an Interferometric Encryption Technique

This paper presents a new method for a visual cryptography scheme that uses phase masks and an interferometer. To encrypt a binary image, we divided it into an arbitrary number of slides and encrypted them using an XOR process with a random key or keys. The phase mask for each encrypted image was fabricated under the proposed phase‐assignment rule. For decryption, phase masks were placed on any path of the Mach‐Zehnder interferometer. Through optical experiments, we confirmed that a secret binary image that was sliced could be recovered by the proposed method.     

Survivable Load Sharing Protocols: A Simulation Study

The development of robust, survivable wireless access networks requires that the performance of network architectures and protocols be studied under normal as well as faulty conditions where consideration is given to faults occurring within the network as well as within the physical environment. User location, mobility, and usage patterns and the quality of the received radio signal are impacted by terrain, man-made structures, population distribution, and the existing transportation system. The work presented herein has two thrusts. One, we propose the use of overlapping coverage areas and dynamic load balancing as a means to increase network survivability by providing mobiles with multiple access points to the fixed infrastructure. Two, we describe our simulation approach to survivability analysis which combines empirical spatial information, network models, and fault models for more realistic analysis of real service areas. We use our simulation approach to compare the survivability of our load balancing protocols to a reference scheme within two diverse geographic regions. We view survivability as a cost-performance tradeoff using handover activity as a cost metric and blocking probabilities as performance metrics. Our results illustrate this tradeoff for the protocols studied and demonstrate the extent to which the physical environment and faults therein affect the conclusions that are drawn.     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.     

A smartphone‐based U‐Healthcare system for real‐time monitoring of acute myocardial infarction

In recent years, medical service has been evolving from systems designed around centralized hospitals to Ubiquitous Healthcare (U‐Healthcare). U‐Healthcare system can facilitate real‐time monitoring of patient states, and can provide medical checkups and management whenever and wherever the medical staff deems necessary. U‐Healthcare services can provide chronic condition monitoring in the early stages of diseases and help execute decisive medical action in emergencies. However, thus far, the application of U‐Healthcare systems has been limited to diseases such as obesity, diabetes, etc. Acute myocardial infarction (AMI) is among the most critical chronic diseases and requires early detection and treatment. In this paper, we propose an AMI diagnostic software technique and protocol that can support real‐time communication between the patient and medical personnel. Our monitoring and diagnostic system has been developed using a protocol based on ISO/IEEE 11073. When data is transferred from the patient's smartphone to a server in hospital, the medical personnel consult the patient's biosensor data to determine the status of the relevant disease and provide appropriate medical service. The relevant information is sent back to the patient's smartphone through a wireless network, and patients can view their data in graphical format through their smartphone. Copyright © 2015 John Wiley & Sons, Ltd.     

Delayed self-heterodyne linewidth measurement of VCSELs

We report on high-resolution linewidth measurements of proton-implanted InGaAs-GaAs VCSELs employing the delayed self-heterodyne method. Devices with 16-/spl mu/m active diameter exhibit record low linewidths of 20 MHz and 4-MHz residual linewidth. The linewidth enhancement factor is accurately determined from the ratio of induced phase to amplitude modulation indexes.