Far-infrared laser oscillation due to cyclotron emission in p-type germanium

Far-infrared laser oscillation due to cyclotron emission in the light hole band of p-type germanium was observed under crossed electric and magnetic fields. The wavelength is inversely proportional to magnetic fields with a cyclotron mass ofm _c =0.048m _c . Numerical calculations based on Luttinger Hamiltonian show that mixing of wavefunctions between the light and heavy hole bands causes population inversion betweenn=0 andn=1 light-hole Landau levels. It is also shown that non-equidistant energy spacing of light-hole Landau levels is essential to yield net amplification.     

A theoretically reproduced phase diagram for vinylidene fluoride and trifluoroethylene copolymers

The phase diagram of ferroelectric copolymers of vinylidene fluoride and trifluoroethylene is reproduced theoretically using a simple model for ferroelectric polymers. The copolymerization ratio dependencies of the intramolecular interaction and the intermolecular interaction are induced to reproduce the phase diagram. These interactions have the following effects on the ferroelectric phase transition of the copolymers. The intermolecular interaction between vinylidene fluoride segments is dominant in the ferroelectric phase transition. The intramolecular interaction, discriminating between different chain conformations, gives the phase transition a variety of characters, including first and second order phase transitions. The copolymerization ratio dependence of the intermolecular interaction is also numerically estimated by summing the interaction energy between all atoms. Comparing these two results, we discuss the size of a segment carrying an elementary process of the phase transition.     

Effect of the structure of cationic polysulfone on the flocculation of kaolinite

The behavior of polycations as flocculants for kaolinite was examined by means of turbidity measurement, with the use of the following four kinds of cationic polysulfones, with molecular weights ranging from 14,000 to 330,000; diallyldimethylammonium chloride SO₂ copolymer [P(DADMAmCl? SO₂)], diallyldiethylammonium chloride–SO₂ copolymer [P(DADEAmCl? SO₂)], diallylmethylamine hydrochloride–SO₂ copolymer [P(DAMA? HCl? SO₂)], diallylamine hydrochloride–SO₂ copolymer [P(DAAHCl? SO₂)]. The effect of the degree of polymerization on the flocculation was remarkable at low molecular weight range. The flocculation value, which is defined as the quantity of the polycation required to obtain 50% transparency at 660 mμ of the supernatant fluid of 2% kaolinite suspension, was inversely proportional to the degree of polymerization to the 0.734 power in the case of P(DADMAmCl? SO₂). This can be understood as the extension of Schulze-Hardy's law. The four different kinds of polysulfones having a similar molecular weight show almost the same capacity for flocculation in acidic or neutral solution. In alkaline solution, however, P(DAMAHCl? SO₂) and P(DAA? HCl? SO₂) are less effective and have higher flocculation values than P(DADMAmCl? SO₂) and P(DADEAmCl? SO₂), which are classified as polyquaternary ammonium chlorides. Moreover the difference increases with increasing pH. This may be attributable to the difference of the dissociability of the polycation. The degree of dissociation of P(DAMA? HCl? SO₂) or P(DAA? HCl? SO₂) decreases with increasing pH and more additive is required to neutralize negative charges on kaolinite. On the other hand, P(DADMAmCl? SO₂) and P(DADEAmCl? SO₂) are almost completely dissociated and are good flocculants over a wide range of pH.     

Development of new dosimetry using extended DNA fibers

We applied fluorescent microscopy to monitor the damage of DNA upon exposure to gamma radiation. Our developed dosimetry demonstrated that the number of breaks in DNA is proportional to the dose of the irradiation but is not dependent on dose rate of the irradiation and the GC content of DNA.     

Mask design compensation for sloped sidewall structures fabricated by X-ray lithography

We have investigated and report in this paper the factors influencing the deformation caused by the dependence between the absorbed X-ray energy on the resist and the shape of the absorber on the X-ray mask. Based on the measurement of errors that occurred during the transferring process between the 2-D shape of mask pattern and the resulting wall of the fabricated 3-D structure, we have developed newly useful graphical data on the absorbed X-ray energy, dosage, and shape of a microstructure. As a result, it is being reported as a method for compensation for the deformed shape after the fabrication of a quadruplets-microneedle. We have considered a number of factors affecting the deformation and finally realized that the effect of a dose–depth nonlinear curve is the most possible cause. Without the compensation of the mask design, we could observe the deformed shapes of the sloped sidewall on the exposed structures. Polymethylmethacrylate microneedle structures fabricated by X-ray lithography with an additional plane-pattern to cross-section transfers technique are directly influenced by the absorber on the X-ray mask pattern. The sidewall of the microneedle was improved by changing the mask pattern from a double right-triangular pattern to a double semi-circular pattern, modeled by comparing the results from a mask-pattern and the actual structure.     

Analytical Model for Redistribution Profile of Ion-Implanted Impurities During Solid-Phase Epitaxy

We evaluated the redistribution profiles of ion-implanted impurities during solid-phase epitaxy using Rutherford backscattering spectrometry (RBS). RBS data revealed that the As concentration changes only near the moving amorphous/crystal interface. We derived an analytical model for the redistribution profiles using a segregation coefficient m between amorphous and crystalline Si, introduced a parameter of reaction length l that is the distance where impurities were exchanged, and obtained good agreement with experimental data with an m value of 3 and an l value of 1 nm for As. Furthermore, we applied our model to P and B redistribution profiles and obtained good agreement with corresponding m value of 4 and l value of 1 nm for P and m value of 0.3 and l value of 1 nm for B     

Characteristics of Linear Synchronous Motor Drive Cycloconverter for Maglev Vehicle ML-500 at Miyazaki Test Track

Maglev vehicle ML-500 in Japan attained a speed of 517 km/h on December 21, 1979. The linear synchronous motor (LSM) drive cycloconverter fabricated and submitted to the track test has a capacity of approximately 12 000 kVA in a continuously variable frequency range of 0-34 Hz with a sinusoidal current waveform. The current can be arbitrarily controlled in a range of 200-1300 A. Despite the rigorous power conversion and control, excellent current control characteristics were obtained: less than 4 percent in deviation of current peak value, about 4 ° in leading phase deviation and approximately 1.2 ms in zero current interval. Some observations about the LSM driving system are made, and an outline of the design and the data obtained from the super-high-speed running tests on Miyazaki test track are given.     

Influence of developer temperature on the shape of structures fabricated by deep X-ray lithography

This paper describes the fabrication of poly(methyl methacrylate) (PMMA) microstructures with three-dimensional (3-D) sloped sidewalls using synchrotron-radiated (SR) deep X-ray lithography (DXRL). Here, the developer temperature was varied to produce variations in the inclination angle of the sloped sidewalls. We found that the PMMA sidewall inclination angle and height were controlled by the dosage, development time, and development temperature. When the development temperature was low, the inclination angle was nearly 0°, regardless of dosage amounts or exposure time. When the development temperature was high, microstructures with sloped sidewalls were fabricated; as the dosage amount and development time increased, the inclination angle increased. The ability to control the PMMA sidewall inclination angle suggests the application of this technique to microstructure fabrication technologies, such as 3-D microelectromechanical system (MEMS) device components, in which the inclination angle becomes the draft angle for moulding processes.     

Investigation of Ozone Loss Rate Influenced by the Surface Material of a Discharge Chamber

Decay characteristics of ozone concentration in oxygen in a chamber with three types of wall material (stainless steel, copper, and aluminum) are measured using the 254 nm photoabsorption method. Effective lifetimes of ozone are estimated from decay curves of ozone concentration. These values depend on the wall material: They are largest for stainless steel and smallest for aluminum. The relationship between effective lifetime and gas pressure is investigated precisely to determine three values. The equivalent diffusion coefficient of ozone in oxygen and the reflection coefficient of ozone at the wall correspond to the loss rate of ozone at the wall. The collisional loss (quenching) rate coefficient of ozone in oxygen is also determined.     

A novel dynamic survivable routing in WDM optical networks with/without sparse wavelength conversion

In this paper, we study the dynamic survivable routing problem, both in optical networks without wavelength conversion and in optical networks with sparse wavelength conversion, and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and genetic algorithms (GA). By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously report cycles (that are formed by two disjoint-link routes) into the routing tables, our new hybrid algorithm can promptly determine the first population of cycles for a new request based on the routing table of its source node, without the time consuming process associated with current GA-based lightpath protection schemes. We further improve the performance of our algorithm by introducing a more advanced fitness function that is suitable for both the above networks. Extensive simulation studies on the ns-2 network simulator show that our hybrid algorithm achieves a significantly lower blocking probability than the conventional survivable routing algorithms for all the cases we studied.