深圳市电镀、印制电路板行业环境风险评价指标体系研究

基于深圳市电镀、印制电路板行业存在的环境问题及环境风险现状,结合国家相关技术指南及导则,提出建立一种电镀、印制电路板行业环境风险评价指标体系,为深圳市试点环境污染责任险制度提供技术支持.     

Influence of the addition of lubricant on the properties of poly(ether ether ketone) fibers

A high‐temperature lubricant genioplast pellets (GPPS) was used in order to improve the processing behavior of poly(ether ether ketone) (PEEK) resin and high‐performance PEEK fibers were produced by melt‐spinning. The rheological properties of spinning material, morphology, mechanical, and thermal properties of PEEK fibers were characterized by using a polymer capillary rheometer, scanning electron microscopy, single fiber electronic tensile strength tester, wide‐angle X‐ray diffraction and thermal gravimetric analyzer, respectively. The results indicated that the introduction of lubricant GPPS decreased the melting viscosity of PEEK resin and improved spinnability of PEEK resin without sacrificing its thermal properties. The filaments are cylindrical with smooth surface and uniform diameter. The optimized content of GPPS was determined to be 1.0 wt% by balancing the decreased torque and changes of the mechanical properties. The strength and modulus of PEEK fibers were 420 MPa and 3.6 GPa, respectively. This should be due to the improvement in spinnability, followed by the enhancements in the orientation and crystallization of PEEK fibers in the process of drawing and annealing. POLYM. ENG. SCI., 53:2254–2260, 2013. © 2013 Society of Plastics Engineers     

Review of quantitative structure‐activity/property relationship studies of dyes: recent advances and perspectives

Dyes have been applied and are playing an increasingly important role in many industries, including the textile, printing, medical and energy industries. Their wide applications imply that specific dyes possessing given properties need to be effectively designed. The present review aims to survey information related to activity/property research of dyes that has been published in the past two decades. Emphasis is laid particularly on studies based on quantitative structure–activity/property relationships that have contributed to the theoretical design and application of dyes. Finally, the perspectives of quantitative structure‐activity/property relationship studies are set out in order to show how this method may be used to design new dyes and to evaluate their different properties. The challenges facing these studies are also outlined.     

二碘化钐在分子内环化反应中的应用

综述了二碘化钐在分子内环化反应中的应用。     

大米栓塞状气力输送的实验研究

本文叙述了以自动成栓、脉冲气刀控制及单仓压送几种方式形成的大米在水平管道中的栓塞状气力输送的实验研究。在管径50毫米,长约15米的管道中,不同的输送供气条件,所形成的栓状流有不同的压降特性和不同的料气输送比,栓塞的长度及运动速度也有差异。在相同气源压力条件下,单仓压送所形成的栓塞状输送比其它几种有较高的输送效率;而自动成栓的栓塞流,则其输送量对气源压力并不敏感,有较为稳定的大米输送质量流量。     

阳离子聚丙烯酰胺溶液的粘性行为的研究

研究了外加盐的种类和浓度、胺化度、PH值、温度和存放时间对阳离子聚丙烯酰胺(CPAM)溶液的粘性行为的影响。结果表明CPAM的特性粘数[η]随外加盐浓度Cs的增大而降低,尤其是在两价盐存在下更明显。在高盐浓度时,[η]与Cs成反比。另外,[η]分别在胺化度约为40mol％或PH=3时显示一个极大值。相反,[η]在温度40℃左右显示一个极小值。CPAM溶液粘度还随着存放时间的增长而降低。     

8279的显示接口分析及混合显示电路设计

分析8279芯片的显示接口及十六段和八段LED显示驱动电路的特点,提出了十六段和八段LED混合显示驱动的方法,并介绍了一种经济、实用的显示驱动电路。     

新型高强韧性奥—贝组织低合金钢的研究

作者应用新的合金设计思想,研制了一类新型高碳低合金超高强度钢。经适当热处理,获得贝氏体铁素体板条与奥氏体薄膜交替排列的奥氏体-贝氏体双相组织。文中研究了钢的组织、力学性能及其与转变温度的关系。     

N-乙氧基羰基-N,N',N'-三甲基胍高效液相色谱分析方法研究

N-乙氧基羰基-N,N',N'-三甲基胍(简称:三甲基胍)是合成高选择性森林除草剂环嗪酮的主要中间体,国内未见高效液相色谱检测方法的报道,我们采用反相高效液相色谱法对三甲基胍进行了定量分析研究,流动相为:V(水)︰V(乙腈)=90︰10,使用ODSC18为填料的不锈钢柱及具可变波长的紫外检测器.本方法的变异系数为0.1...     

贮氢合金的应用研究进展

本文概括了新型功能材料——贮氢材料的发展状况和应用研究进展,重点综述了稀土储氢合金性能改善方面的最新成果和用于二次电池的贮氢材料的状况。