焊接铁网石箱(GABION)挡土墙设计与施工

焊接铁网石箱是采用镀锌的轻质铁线和先进的焊接工艺制造而成，可用于水利、公路、建筑工程。本文就焊接铁网石箱在水利工程挡土墙中的应用设计、制造工艺以及施工方法进行了详尽地介绍。     

低速爆轰管对黑火药的点传火性能研究

文章采用中心点火管结构的实验装置研究了黑火药的点传火性能。用低速爆轰 (L VD)中心点火管来点燃黑火药时 ,1# ～ 3# 大粒黑药的传火速度为 70 0 m· s-1～ 80 0 m· s-1数量级 ,燃烧波宽度在 3.1ms～ 3.5 ms,最大压力峰值 :1# 为 36 .4 MPa,2 # 为 2 4 .0 MPa,3# 为 38.0 MPa。用普通中心点火管点燃黑火药时 ,2 # 、3# 和钝化 2 # 大粒黑的传火速度分别为 6 1.2 m· s-1、6 8.2 m·s-1和 4 0 .1m· s-1,最大燃烧波宽度分别为 9.2 ms、6 .3ms和 9.5 ms。燃烧波表明 ,L VD中心传火管与普通中心传火管相比较 ,在传火管的不同位置处 ,前者的 P- t曲线一致性远高于后者。     

湿化学法制备纳米ATO导电粉

采用非均相成核法 ,在Sn(OH) 4 晶种上均匀生长Sb掺杂Sn(OH) 4 ,制备纳米ATO粉末。以电阻测定系统研究了合成条件如掺杂浓度、反应温度、pH值、SnCl4浓度等对最终粉末电阻性能的影响。以TG DSC热分析、XRD、TEM等手段研究了晶粒生长过程 ,XRD显示为四方金红石型结构 ,平均粒径为15nm。当Sb/Sn(mol比 ) =0 .0 5 ,pH =2 ,T =60℃ ,SnCl4=1.2～ 1.8mol·L-1时 ,粉体电阻小于 0 .5Ω。     

Optical dot gain on newsprint determined with the Lund nuclear microprobe

A technique for measuring optical dot gain, i.e. the relative difference between the actual screen dot and the optically perceived one, is presented. By combining measurements from the non-optical nuclear microprobe with data from image analyzing technique the optical dot gain can be determined. The procedure to reach pixel by pixel correlation on a micrometer scale is discussed. In the newsprint sample studied in this investigation a typical optical dot gain between 15 and 20% was deduced. The variation in the optical dot gain was correlated with other characteristic parameters of the print and newsprint and especially a positive correlation to the mass density of the newsprint was observed.     

巨型机转子机制的改进策略

本文分析了通用寄存器型计算机和通用堆栈型计算机处理转子指令的不同方法,研究了类Cray-1转子机制的实现原理,提出了在类Cray-1通用寄存器型模型机上采用堆栈来处理转子指令的实现方法。     

Effect of microwave heating on quality and mycoflora of sorghum grain

Sorghum (cv. Maldandi M35-1) was modified to 12, 14 and 16% moisture content (m.c.) and heat-treated with microwave energy at 3 levels, for 30 sec (=4.5, 9 and 18 kJ), and 60 sec (=9, 18 and 36 kJ). The effect of microwave heating on rise and subsequent fall in grain temperature, reduction in m.c. and quality characteristics including germination, seedling dry matter, free fatty acids (FFA) and contaminant fungi was determined. The temperature attained and the moisture loss in the sorghum grain was affected by grain m.c. and the time of exposure. At the lowest and highest microwave treatment level grain temperatures reached 30–40°C and 90–101°C, respectively. However, a 60-sec treatment at the highest energy level was lethal for the grain, particularly at 14 and 16% m.c. The FFA values were unaffected by microwave treatment. Statistical analyses showed that the microwave power level and time individually, and power level × time interactions were significant for most quality characteristics. The fungi present most abundantly on the sorghum grain were Eurotium spp., Aspergillus candidus, A. niger and Penicillium spp. Increasing m.c. and microwave heating resulted in elimination of most fungi after a 30-sec exposure time. With a 60-sec exposure period, practically all fungi were eliminated from the grain.     

Heat and Moisture Transfer in Wet Sand Exposed to Solar Radiation—Models and Experiments Concerning Buried Objects

One promising method of locating buried objects, such as land mines, is to use optical systems for detecting contrasts in surface temperature. With enhanced knowledge about the interacting physical processes behind these temperature contrasts, it is possible to improve detection precision. In such a context, moisture movement in the soil and moisture evaporation from the surface have been found to be of particular interest. This study was based on indoor experiments on wet and dry sand exposed to radiation from a solar panel. Simulations of heat and moisture transfer conducted with a one-dimensional model are also presented for the experiments. The calculations were successful in accurately predicting surface temperatures for both wet and dry sand, making it possible to predict surface temperatures under different conditions. These findings will contribute to increasing the probability of successful detection of buried objects under real conditions using optical methods.     

建筑构件积木式CAD软件研究

西方以混凝土坝内廓道施工样图设计阶段为例，论述水工建筑件积木式ＣＡＤ软件的必要性和积木模块ＣＡＤ软件的具体实现方法。     

含能材料分子结构与感度的相关性

综述了国外近年来含能材料分子结构参数与感度相关关系的最新研究成果。研究表明：某些芳香族硝基化合物的撞击感度与Ｃ－ＮＯ２键强度有关；硝胺及脂肪族硝基化合物的冲击波感度与分子中Ｎ－ＮＯ２键的数目，长度和分子量相关。     

The probability density and autocorrelation of short-term global and beam irradiance

For individual hours, a characteristic bimodal pattern of short-term global and beam irradiance is frequently observed, with modes at high and low irradiances and with low probabilities near the hourly averages. For such hours, averaging over the hour will imply smoothing of quite significant variations within the hour. Models for the probability density distributions of short-term (5 min or less) irradiances are presented in this paper. These distributions are not unique functions of the hourly averages, but depend heavily also on the irradiance variability within the hour. This intrahour variability is found to depend on the averaging time and also on the interhour variability among three hourly averages, namely, the hour in question, the preceding and the deceding hour. The distribution differences between 5 min averages and instantaneous values are, however, negligible for most practical purposes. The lag one autocorrelation is evaluated as a function of averaging time, and a first order autoregressive model is presented. With hourly averages as the only input the probability density and autoregressive model in combination produce time series of short-term intrahour averages having realistic distributions and autocorrelation structure.