Fault diagnosis of a power system based on a description of the structure and function of the relay system

Abstract: This paper proposes a method of fault diagnosis of power systems based on a knowledge-based approach. It makes use of information on relays and circuit breakers. The feature of this method is that the relay sequence is represented by a logical circuit. In this circuit the following two relations are represented; a logical relation between inputs and output of a gate and a connective relation between logical gates. These two relations are expressed by production rules in the knowledge base. When the information from relays and circuit breakers is given to the logical circuit, faulty components are pointed out.     

Fish Myosin Fragments Solubility and ANS-Fluorescence Intensity Affected by n-Butanol

Changes in the solubility and 8-anilino-1-napthalene sulfonate (ANS)-fluorescence intensity of oval filefish, tilapia, and black marlin myo-sins and their fragments by n-butanol were examined in connection with myosin gel-forming abilities. The thermal gel-forming abilities of myosins were greatly enhanced by the addition of 0.3–0.8M n-butanol. KC1 concentration-solubility curves revealed that after n-butanol addition a marked decrease in the solubility was observed for myosins and S-1s, whereas there was a slight decrease for rods. The fluorescence intensity of myosins-ANS in the presence of n-butanol increased markedly by heating at 30° and 35°C. A similar increase in the fluorescence intensity occurred in all S-ls-ANS, but not in rods.     

Induction of adaptive response <i>in utero </i>by ionizing radiation: A radiation quality dependent phenomenon

Investigation on possible induction of adaptive response (AR) by high-liner energy transfer (LET) particle radiation for protection against low-LET photon radiation-induced detrimental effects has not yet been performed in utero. This study verified if an AR could be induced by high-LET particle radiation from accelerated heavy ions against low-LET X-ray radiation-induced detrimental effects on fetal mice. Total body irradiation of pregnant C57BL/6J mice were performed by delivering a priming dose ranging from 10 mGy to 320 mGy of particle radiation on gestation day 11 followed one day later by a challenge dose at 3500 mGy from X-ray radiation. The monoenergetic beams of carbon, silicon and iron with the LET values of about 15, 55, and 200 KeV/μm, respectively, were examined. Significant suppression by the priming radiation of the detrimental effects (fetal death, malformation, or low body weight) was used as the endpoints for judgment of a successful AR induction on gestation day 18. Existence of AR was not observed. On the other hand, the priming dose of high-LET particle radiation, in some cases, even increased the detrimental effects induced by the challenge dose from low-LET X-ray radiation. Although existence of AR induced by high-LET radiation in cultured mammalian cells in vitro and in certain tissues of laboratory mice in vivo was demonstrated, the present study did not suggest that low dose of high-LET particle radiation could induce an AR in fetal mice in utero under the setup of our experimental system.     

地铁站内烟气流动特性和消防安全

介绍了地铁站内烟气流动和控制的试验和数值研究。在三个真正地铁站内利用甲醇油池火作为燃料进行了试验，用所获得数据来验证地铁站火灾数值模型，并进一步检验其烟控系统的性能。在站内使用了制量烟气流动模型，再现了最简单条件下每个站点的试验结果，然后把结果跟其他试验条件下的试验结果进行了比较。最后，用模型预测更复杂火灾的烟气流动情况。另外，还讨论了地铁系统的有效设计和火灾安全设施的正常运作情况。通过限制内饰面材料的燃烧性能或者安装自动喷淋系统都可以有效控制热释放速率，且在站点两端开设逃生路线、站台和地铁隧道直接卷帘的正常启动等可有效保证安全疏散。     

汽车外面板用高强度钢板

利用Nb(C、N)的微细析出物和晶粒细化机理,开发出了具有优良成形性能的汽车外面板用SFG(超细晶)高强度钢.钢中的Nb析出物呈现出目前薄板中所没有的特殊析出形态,并且在晶界附近,有形成PFZ(无析出物区)析出物缺乏层的趋势.由于PFZ的存在,虽然晶粒细小,但也显示出了低屈服强度.另外,r-值也比传统钢高,由于添加了B,使钢板显示出优良的抗二次加工脆性.模拟实际的冲压工艺,采用汽车前挡板的金属冲模进行冲压试验,其结果表明,该开发钢比传统钢具有更宽的成形范围.实践证明,该钢具有优良的成形性能.     

Description and Phylogenetic Position of Dinosaur Eggshells from the Luanchuan Area of Western Henan Province, China

Here, we examine 145 dinosaur eggshells from a new fossil locality in the Qiupa Formation (Upper Cretaceous) of the Luanchuan area in western Henan Province, China. The eggshells display elongatoolithid macro- and microstructures, including ridges and nodes on the outer surface, two ultrastrncturai layers, and an undulatory boundary between the mammiilary and continuous layers.A phylogenic analysis shows that the Luanchuan eggshells belong to the ooclade Eiongatoolithidae.Within Elongatoolithidae, the thickness ratio of the mammillary layer to the entire eggshell, and the porosity of the Luanchuan eggshells are comparable to the oogenera Macroolithus and Elongatoolithus. There is no direct evidence for the taxonomic identity of the Luanchuan eggshells;however, they were likely laid by oviraptorids based on their phyiogenetic position and their similarities with known oviraptorid eggs.     

Electron cyclotron current drive on WT-III by a 56 GHz gyrotron

Electron cyclotron current drive (EC-CD) experiments have been carried out at the fundamental and the second harmonics on the WT-III tokamak using extraordinary mode radiation at 56GHz launched from the low field side. The EC driven current of 24 kA is attained at the power level of 100 kW and the plasma with the density of 2 × 10¹²cm^?3 and the electron temperature of several hundreds eV can be sustained during the EC pulse. The efficiency of EC-CD is 1·0 × 10^?2 (10¹⁹m^?2 A W^?1) at the fundamental and 3·5 × 10^?2 at the second harmonic. The unidirectional high energy electrons in the initial target plasma is necessary for EC-CD     

锆钛酸铅压电陶瓷PZT7的形状记忆效应研究

提出了一种新的方法可以使锆钛酸铅压电陶瓷PZT7具有形状记忆效应.用自制的sawyer-Tower电路测试得到PZT7方形样品发生极化反转对应的电场强度大约为130kV/cm.当施加对称的饱和极化电压370V时,PZT7/Si(109/146μm)悬臂梁端部的变形一电场曲线呈现典型的"蝴蝶"形状.在外电场为0时,悬臂梁端部的变形为0.如果施加不对称的极化电压,悬臂梁端部的变形--电场曲线发生明显的变化.不同的反向极化电压使悬臂梁端部产生不同的变形,而且,电压和变形是一一对应的.因此,在外电场为零时,PZT7/Si悬臂梁可以具有多个不同的稳定位置,表现出明显的形状记忆效应.实验表明,对于长度为15.5mm的PZT7/Si悬臂梁而言,当施加的反向极化电压从120V回到0时,悬臂梁端部产生的变形最大,为68.5μm.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.