Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.     

Atomistic origin of high-quality “novel SiON gate dielectrics”

We have investigated the effect of the oxygen incorporation into SiN films by the first principles calculations. The calculated results show that the oxygen incorporation tends to generate defect states in SiN band gap by forming dangling bonds and floating bonds of Si. Based on the calculated results, it is also indicated that the high quality SiON film can be fabricated by suppressing the incorporation of O atoms into the SiN film, reproducing the reported experiments.     

1 Tbit/s (111 Gbit/s/ch X 10 ch) no-guard-interval CO-OFDM transmission over 2100 km DSF

Spectrally efficient (2bit/s/Hz) 1 Tbit/s DWDM transmission of 111 Gbit/s no-guard-interval PDM CO-OFDM signals with 50 GHz spacing over DSF is demonstrated. The record transmission distance of 2100 km was achieved for a 100 Gbit/s-data-rate CO-OFDM system.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Fiber fuse phenomenon in step-index single-mode optical fibers

The unsteady-state thermal conduction process in step-index single-mode (SM) optical fiber was studied theoretically with the explicit finite-difference method. We considered a high-temperature loss-increase mechanism, which includes two factors that bring about an increase in the absorption coefficients: 1) electronic conductivity due to the thermal ionization of a Ge-doped silica core and 2) thermochemical SiO production in silica glass. The core-center temperature changed suddenly and reached over 4/spl times/10/sup 5/ K when a 1.064-/spl mu/m laser power of 2 W was input into the core layer heated at 2723 K. This rapid heating of the core initiated the "fiber fuse" phenomenon. The high-temperature core areas were enlarged and propagated toward the light source. The propagation rates of the fiber fuse, estimated at 1.064 and 1.48 /spl mu/m, were in fair agreement with the experimentally determined values. We found that the threshold power for initiating the fiber fuse increases from 0.98 to 1.26 W when the input laser wavelength is increased from 1.06 to 1.55 /spl mu/m.     

Thin-Film Thermoelectric Modules for Power Generation Using Focused Solar Light

We demonstrated the fabrication of thin-film thermoelectric generators and evaluated their generation properties using solar light as a thermal source. Thin-film elements of Bi_0.5Sb_1.5Te₃ (p-type) and Bi₂Te_2.7Se_0.3 (n-type), which were patterned using the lift-off technique, were deposited on glass substrates using radiofrequency magnetron sputtering. After annealing at 300°C, the average Seebeck coefficients of p- and n-type films were 150???V/K and ?104???V/K, respectively, at 50°C to 75°C. A cylindrical lens was used to focus solar light to a line shape onto the hot side of the thin-film thermoelectric module with 15 p?Cn junctions. The minimum width of line-shaped solar light was 0.8?mm with solar concentration of 12.5 suns. We studied the properties of thermoelectric modules with different-sized p?Cn junctions on the hot side, and obtained maximum open voltage and power values of 140?mV and 0.7???W, respectively, for a module with 0.5-mm p?Cn junctions. The conversion efficiency was 8.75?×?10^?4%, which was approximately equal to the value estimated by the finite-element method.     

Computer Simulation of Axis-Encircling Beams Generated by an Electron Gun with a Permanent Magnet System

Results from computer aided design of a novel electron gun generating axis-encircling beams are presented and discussed. Numerical experiments were performed by the new version of the software package GUN-MIG named GUN-MIG/CUSP. It is based on a self-consistent relativistic model and is developed as a problem oriented tool for analysis of electron-optical systems with magnetron injection guns (MIG) and electron guns with field reversal (cusp guns), forming axis-encircling beams. As a result of the simulations an electron-optical design of a novel electron gun with permanent magnet system was accomplished. The gun is expected to form high quality beams with small velocity spread and beam ripple. Parameters of the generated beams are appropriate for a prospective weakly relativistic high harmonic large orbit gyrotron (LOG). The development of such device is in progress now at the Research Center for Development of Far-Infrared Region (FIR Center) at Fukui University.     

PMD compensation in optical coherent single carrier transmission using frequency-domain equalisation

The transmission performance of optical single-carrier (SC) transmission using frequency-domain equalisation (FDE) to counter polarisation mode dispersion (PMD) is evaluated. 25 Gbit/s coherent optical SC transmission using FDE (CO-SC-FDE) is demonstrated in the presence of a significant amount of differential group delay (DGD). The results show that CO-SC-FDE compensates for the influence of the 125 ps DGD; the OSNR penalty is 0.81 dB.     

A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

Low-threshold and high temperature single-longitudinal-mode operation of 1.55 ?m-band DFB-DC-PBH LDs

1.55 ?m-band distributed-feedback laser diodes with double-channel planar buried heterostructure (DFB-DC-PBH LDs) have been developed. As well as low threshold current, 19 mA at room temperature, stable CW single-longitudinal-mode operation up to the high power level of 23 mW and the high temperature of 108°C has been obtained.