Hyperbranched Acrylate Copolymer via Initiator‐Fragment Incorporation Radical Copolymerization of Divinylbenzene and Ethyl Acrylate: Synthesis,Characterization, Hydrolysis,Dye‐Solubilization,Ag Particle‐Stabilization,and Porous Film Formation

Summary: Soluble hyperbranched acrylate copolymers were prepared by the copolymerization of divinylbenzene (0.10 mol · L^?1) and ethyl acrylate (0.50 mol · L^?1) using dimethyl 2,2′‐azoisobutyrate of high concentrations (0.30–0.50 mol · L^?1) as initiator at 70 and 80 °C in benzene. The copolymer formed at 80 °C for 1 h showed the weight‐average molecular weight of 2.5 × 10⁵, the small radius of gyration of 10 nm, the low second virial coefficient of 5.7 × l0^?7 mL · g^?2 as shown by the MALLS measurements at 25 °C in tetrahydrofuran, and also the very low intrinsic viscosity of 0.10 dL · g^?1 at 30 °C in benzene. The hyperbranched copolymer exhibited an upper critical solution temperature (35 °C on cooling) in an acetone‐water (60:11 v/v). The copolymer showed an ability to encapsulate and transfer Rhodamine 6G as a dye probe and could stabilize Ag nanoparticles. The porous film was prepared by simply casting an acetone solution of the hyperbranched copolymer on a cover glass. The copolymer molecules radially arranged on the surface layer of the spherical pores as observed by the polarized optical microscope. The hyperbranched acrylate copolymer was hydrolyzed by KOH to yield poly(carboxylic acid).

Optical microscope image (crossed polarizers) of a porous film from copolymer solution in acetone.     

Mechanism of Ca2+ increase in myoblasts derived from chicken embryos

The mechanism of intracellular calcium ions (Ca(2+)) increase in chicken myoblasts was studied using histological, immunohistochemical, immunoblotting and Ca(2+) imaging techniques. Mononuclear myoblasts at embryonic day 12 (E12) contained myofibrils in the peripheral cytoplasm, and the sarcoplasmic reticulum was observed in the cytoplasm. Several Ca(2+)-related receptors, namely acetylcholine (ACh) receptors, dihydropyridine receptors (DHPRs) and ryanodine receptors (RyRs), were detected in the tissue as early as E12. Western blotting analyses detected one band corresponding to RyR subtype 3 (RyR3) at E12 and two bands corresponding to RyR1 and RyR3 after E13. Ca(2+) imaging of mononuclear myoblasts in vitro revealed an intense Ca(2+)-increase response to ACh stimulation, and this effect was abolished after EGTA addition to the culture medium. Nifedipine treatment also led to a lack of Ca(2+) increase in response to ACh stimulation, while ryanodine treatment led to a weak Ca(2+)-increase response. On the other hand, multinuclear myoblasts showed a Ca(2+)-increase response to ACh stimulation in the presence of not only EGTA but also nifedipine, although ryanodine treatment led to a lack of Ca(2+) increase. These results suggest that the mechanism of Ca(2+) increase in mononuclear myoblasts involves extracellular Ca(2+) entry through DHPRs, which is amplified by Ca(2+) release from the cytoplasmic Ca(2+) store, while multinuclear myoblasts mainly depend on Ca(2+) release from the cytoplasmic Ca(2+) store.     

Adsorption and Plasma Decomposition of Gaseous Acetaldehyde on Fibrous Activated Carbon

In this paper, adsorption and nonthermal plasma decomposition of gaseous acetaldehyde were studied using barrier-discharge plasma reactor, in which fibrous activated-carbon textile (ACT) was used as both an electrode and adsorbent. The acetaldehyde molecule was adsorbed on ACT depending on the concentration of gaseous acetaldehyde. When acetaldehyde concentration was 500 ppm or lower, the amount of adsorbed acetaldehyde was estimated by Henry's equation. The adsorbed acetaldehyde on ACT sheet was decomposed by the barrier-discharge plasma generated by applying high-voltage ac regulated by a neon transformer. When 200 ppm of acetaldehyde was fed continuously to the plasma reactor, 30, 45, and 120 ppm of acetaldehyde remained, with applied voltage of 13, 10, and 5 kVp, respectively. We also checked electric energy efficiency on the decomposition of acetaldehyde. Although 10 or 13 kVp of plasma has the same energy efficiency, 5 kVp of plasma was less effective for the decomposition because of unstableness of plasma generation. These results suggested that 10 kVp or more high-voltage ac is suitable for the decomposition of acetaldehyde by using ACT as the high-voltage electrode.      

Effect of a dynamic absorber on friction-induced vibration of a rectangular plate

When a plate-like object is rubbed by rubber, friction-induced vibration is generated. To reduce the friction-induced vibration, we experimentally investigate the characteristics of the vibration of a rectangular glass plate. The results show that the frequency of the friction-induced vibration is almost the same as the natural frequency of a glass plate. The vibration is generated when the natural frequency of a rubbing system is close to that of a glass plate. We then examine the effect of a dynamic absorber mounted on the glass plate. The results demonstrate that the damping of a dynamic absorber is effective for suppressing the friction-induced vibration. Numerical simulation is also performed using a simplified analytical model. The calculated results agree qualitatively with the experimental ones.     

Surface durability of powder-forged roller treated by shot peening

To investigate the influence of shot peening on the surface durability of powder-forged rollers, the case-hardened powder-forged rollers with a forging density of 7.5 g/cm³ treated by the single shot peening and the double shot peening were fatigue-tested under a sliding-rolling contact condition. The surface roughness, the surface hardness and the surface compressive residual stress of the rollers were increased by the shot peening. In addition, the pores near the roller surface were deformed by the shot peening. The failure mode of all the test rollers was spalling due to subsurface cracking. The fatigue lives of all the test rollers were improved by the shot peening, and that of the test roller S08, which was shot-peened with the hardest steel shots in this experimental range, was especially improved. The surface durability of the test roller S08 was also most improved by the shot peening. Cracks became difficult to occur and propagate under the roller surface since the pores near the roller surface were deformed by the stronger shot peening. In this study, double shot peening, which generally restrains the increase in surface roughness, was not particularly effective for the improvement in the surface durability of the powder-forged rollers, because the influence of tangential force on fatigue was not always great in a case of subsurface cracking.     

Pt-promoted α-Al2O3-supported Ni catalysts: Effect of preparation conditions on oxi-reduction and catalytic properties for hydrogen production by steam reforming of methane

The effect of Pt addition on the oxi-reduction properties of α-Al₂O₃-supported Ni catalysts, with different degrees of interaction between NiO and the α-Al₂O₃ support, was studied using atmospheres of H₂, H₂/H₂O, and CH₄/H₂O. The effect of Pt promotion on the reduction of NiO with H₂ was significant for NiO species that interacted more strongly with the alumina surface, but was much lower when a NiAl₂O₄-like bulk phase was formed. For samples activated with H₂, although metal dispersion decreased with increasing Pt content, the activity was maintained constant by the presence of Pt sites. For samples activated with a CH₄/H₂O mixture, the activity increased with increasing Pt content, due to the higher reducibility of Ni in the Pt-promoted catalysts. The Pt promotion effect was stable; there was no important decrease in the influence of Pt on NiO reduction, even after high temperature re-oxidation of the catalysts.     

Room temperature aging behavior of Ti-Nb-Mo-based superelastic alloys

The effect of room temperature (RT) aging on the superelasticity of Ti-Nb-Mo-based superelastic alloys is investigated. The results show that annealing at relatively low temperatures such as 973 K after severe cold rolling results in poor resistance to the effect of RT aging. The transformation stress increases considerably due to the formation of an isothermal ω phase at RT. Addition of Sn is partially effective in suppressing the RT aging effect in the specimens annealed at 973 K. The RT aging effect is suppressed by increasing the annealing temperature, due to the annihilation of lattice defects or non-equilibrium vacancies introduced during cold rolling, which are responsible for accelerating the diffusion process, however, superelasticity is reduced by annealing at higher temperatures, due to a decrease in the critical stress for slip deformation (σ_CSS). The specimen annealed at 1173 K followed by aging at 773 K exhibits stable superelasticity with a high resistance to the effect of RT aging. Annealing at 1173 K causes the annihilation of lattice defects or non-equilibrium vacancies, while aging at 773 K induces precipitation of the α phase, which in turn causes an increase in σ_CSS, and further enhances the resistance to the RT aging effect by enriching the matrix with β-stabilizing elements.     

Variations in signal intensity with periodical temperature changes in vivo in rat brain: analysis using wide-field optical coherence tomography

In a previous study, we reported measurements of three-dimensional (3D) optical coherence tomography (OCT) images through a thinned skull by reducing temperatures from 28 °C to 18 °C in vivo in the rat brain to show negative correlation coefficients (CCs) between ratios of signal intensity (RSI) and temperature for applications to monitoring brain viability. In this study, using the same OCT system, we measured 3D OCT images of the rat brain by periodically changing tissue temperatures from 20 °C to 32 °C in vivo. In the evaluation of CCs among RSI, temperature, and heart rate, the largest number of periods was four, and the longest measurement time was 570 min. Averaged CCs between RSI and temperature, and between RSI and heart rate, were -0.42 to -0.50 and -0.48 to -0.64, respectively. RSI reversibly changed subsequent variations of temperatures and finally increased rapidly just before cardiac arrest. These results indicate that RSI could correspond to decreases in viability because of local ischemia and recovery.     

Lifetime test and heritage on orbit of coolers for space use

This report describes the results and operating status of ground lifetime testing and achievements on orbit of coolers for space use. Ground lifetime tests of coolers of three types were conducted to demonstrate their long life and reliability. Three single-stage Stirling coolers were tested for 89,016, 71,871 and 68,273 h from 1998, a two-stage Stirling cooler was tested for 72,906 h, and a 4-K class cooler with a two-stage Stirling cooler and a Joule–Thomson cooler was tested for over 2.5 years. After lifetime tests were completed, a few coolers were investigated to determine the cause of the cooling performance degradation. Additionally, the filled gas of the coolers was analyzed. These coolers have shown good results on orbit. Three single-stage Stirling coolers were carried on the X-ray astronomical satellite “SUZAKU” (launched in July 2005), Japanese lunar polar orbiter “KAGUYA” (launched in September 2007), and the Japanese Venus Climate Orbiter “AKATSUKI” (launched in June 2010). Two units of a two-stage Stirling cooler were carried on the infrared astronomical satellite “AKARI” launched in February 2006. A 4-K class cooler was carried on the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) aboard the Japanese Experiment Module (JEM) of the International Space Station (ISS). SMILES was launched in September 2009.     

In situ X-ray diffraction of surface oxide on type 430 stainless steel in breakaway condition using synchrotron radiation

Changes in the crystal structure of type 430 stainless steel and the oxides on its surface were studied in situ at 1373 K using a high-intensity synchrotron X-ray source provided by SPring-8 in Japan. The surface of the steel was initially covered with Cr₂O₃, which was then converted to FeCr₂O₄, and finally Fe₃O₄ and Fe₂O₃ formed on it. These results indicated that the reason for the breakaway oxidation in type 430 stainless steel is Cr depletion beneath Cr₂O₃ layer and the subsequent ionisation of Fe, not the simple mechanical failure of Cr₂O₃.