Effect of friction stir processing on microstructure of laser clad cobalt-based alloy

(The microstructural refinement of cobalt-based alloy (Stellite No. 6) by laser cladding and friction stir processing (FSP) was studied. A nanometer-sized microstructure consisting of fine carbide (particle size: 100–200 nm) and a grain (grain size: 150–250 nm) was successfully fabricated by the FSP on the laser clad cobalt-based alloy. The nanostructured cobalt-based alloy (Stellite No. 6) had an extremely high hardness of about 750 HV.     

Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852     

Attentional modulation of the mere exposure effect.

The mere exposure effect refers to the phenomenon where previous exposures to stimuli increase participants’ subsequent affective preference for those stimuli. This study explored the effect of selective attention on the mere exposure effect. The experiments manipulated the to-be-attended drawings in the exposure period (either red or green polygons in Experiments 1 and 2; both red and green polygons in Experiments 3 and 4) and black to-be-evaluated drawings in the affective judgment period (morphologically identical to the red or green polygons in Experiments 1 and 4; morphologically identical to the composite drawings in Experiments 2 and 3). The results showed a significant mere exposure effect only for the target shapes involved in attentional selection, even when the participants could recognize the nontarget shapes. This indicates that selective attention modulated the mere exposure effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of Morphology‐Controlled Plate‐Like Sodium Niobate Particles by Hydrothermal Synthesis

Sodium niobate (NaNbO₃) particles with plate‐like morphology and hexagonal unit cells were prepared by the hydrothermal method. The result of SEM showed that the hexagonal NaNbO₃ were characterized by plate‐like morphology with a diameter of 5–15 μm and a thickness of 1–2 μm. The crucial influences on the morphology and crystal phase of the NaNbO₃, such as concentration of [OH^?], surfactant, and K⁺:Na⁺ ratio, were established. By further calcination treatment, the plate‐like hexagonal NaNbO₃ particles could be completely transformed into perovskite structure without morphology change. The XRD and EBSD results indicate that the major face of the calcined particles is parallel to the crystallographic (001)_pc (pseudo cubic index) plane. Compared with the traditional high‐temperature molten salt method, this work provides a simpler way to prepare the template for fabricating textured ceramics.     

Minimum void ratio characteristic of soils containing non-plastic fines

The minimum void ratio is an index widely used to indicate the contraction characteristics and the densest state of soils. The minimum void ratio obtained by the traditional test method has been utilized to represent the density of soils irrespective of their fines content despite the restriction (FC ≤ 5%). By considering the effect of the blow count, pore water, and their primary properties, the applicability of the minimum void ratio to soils containing fines was examined with an automatic tapping machine. It was confirmed that the blow count of the traditional method is not sufficient for soils with a high fines content. Furthermore, the presence of pore water had a significant effect on the minimum void ratio of soils containing fines. The characteristics of the cyclic minimum void ratio, which indicates the minimum void ratio obtained throughout the repetition of liquefaction and drainage, were also examined.     

Characterization of the Oxide Scale Formed on T12 Water Wall Tube After Long-term Service in Supercritical Power Plant

Oxidation of Metals - Oxide scale control is one of the critical maintenance issues in fossil fuel power plant. Hence, the water treatment of the feed water has been changed from all-volatile...     

Oxidation kinetics for <Emphasis Type="Italic">cis</Emphasis>-9,<Emphasis Type="Italic">trans</Emphasis>-11 and <Emphasis Type="Italic">trans</Emphasis>-10,<Emphasis Type="Italic">cis</Emphasis>-12 isomers of CLA

The autoxidation processes of the cis-9,trans-11 (c9,t11) and trans-10,cis-12 (t10,c12) isomers of CLA were separately observed at ca. 0% RH and different temperatures. The t10,c12 CLA oxidized faster than the c9,t11 isomer at all tested temperatures. The first half of the oxidation process of t10,c12 CLA obeyed an autocatalytic-type rate expression, but the latter half followed first-order kinetics. On the other hand, the entire oxidation process of c9,t11 CLA could be expressed by the autocatalytic-type rate expression. The apparent activation energies and frequency factors for the autoxidation of the isomers were estimated from the rate constants obtained at various temperatures based on the Arrhenius equation. The apparent activation energies for the CLA isomers were greater than those for the nonconjugated n−6 and n−3 PUFA or their esters. However, the enthalpyentropy compensation held during the autoxidation of both the CLA and PUFA. This suggested that the autoxidation mechanisms for the CLA and PUFA were essentially the same.     

Contrasting effects of water-soluble and water-insoluble dietary fibers on bile acid conjugation and taurine metabolism in the rat

The effect of the type of dietary fiber on the bile acid and taurine metabolism was examined in rats. Diets containing 10% of various water-soluble fibers (citrus pectin, konjak mannan, guar gum) as compared to a fiber-free diet increased biliary excretion of total bile acids. In contrast, water-insoluble dietary fibers (cellulose, corn bran, chitin; 10% in the diets) as well as cholestyramine (5% in the diet) considerably, decreased bile acid excretion. Water-soluble dietary fibermediated increases in bile acid excretion were totally attributable to increases in glycine-conjugates. Thus, these fibers greatly increased by the bile acid glycine-to-taurine ratio (G/T). Excretio of glycine conjugates decreased more than that of taurine conjugates in rats fed various water-insoluble dietary fibers. As a results, G/T in rats fed water-insoluble fibers was significantly lowered as compared to G/T in animals fed a fiber-free diet. Cholestyramine did not affect the G/T ratio of bile acids. Fecal bile acid excretion and the activities of hepatic cholesterol 7α-hydroxylase (EC 1.14.13.17) in rats fed various water-soluble dietary fibers approximately doubled as compared to the respective values for rats fed a fiber-free diet. Whereas cholestyramine greatly increased these parameters, water-insoluble fibers did not significantly affect them. Various water-soluble fibers decreased hepatic concentration and urinary excretion of taurine as well as the activity of hepatic cysteine dioxygenase (EC 1.13.11.20). In contrast, water-insoluble fibers considerably increased hepatic taurine concentrations and enzyme activities. The parameters for taurine metabolism were unaffected by cholestyramine. It was suggested that the types of dietary fiber affected hepatic taurine synthesis and thus modified bile acid glycine/taurine ratios.     

Carbon Dioxide Sensor Mechanism of Porous Hydroxyapatite Ceramics

Hydroxyapatite and Cl⁻ -containing hydroxyapatite powders are prepared and characterized. Reversible substitution of CO^2-₃ for OH⁻ at the surface is presumed to be responsible for the sensor function. The role of Cl⁻, which is necessary to realize the sensor function and is incorporated during soaking treatment, is considered as follows. It may reduce the strain caused by the incorporation of CO^2-₃ (which is larger than OH⁻), and, hence, promote the reversible substitution reaction. This behavior is presumed because Cl⁻ -containing hydroxyapatite samples exhibit sensor characteristics typical of CO₂ without any treatment.     

深基坑工程动态施工反演分析与变形预报

提出了动态施工反演分析的思想，即在常规的反分析过程中引入逐步开挖和逐道支撑的动态施工因素，以求仿真模拟工程实际情况，进而为相继施工阶段的变形预报提供可靠保证。文中基于任意施工阶段间围护墙体变形与内支撑梁轴力的增量测值和施工ＦＥＭ优化反演分析法，反推了各土层的弹性模量系数，给出了作用在墙体两侧的土压力分布，并预报各相继施工阶段的墙体和土体变形、内力及内支撑梁轴力。