Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852     

Attentional modulation of the mere exposure effect.

The mere exposure effect refers to the phenomenon where previous exposures to stimuli increase participants’ subsequent affective preference for those stimuli. This study explored the effect of selective attention on the mere exposure effect. The experiments manipulated the to-be-attended drawings in the exposure period (either red or green polygons in Experiments 1 and 2; both red and green polygons in Experiments 3 and 4) and black to-be-evaluated drawings in the affective judgment period (morphologically identical to the red or green polygons in Experiments 1 and 4; morphologically identical to the composite drawings in Experiments 2 and 3). The results showed a significant mere exposure effect only for the target shapes involved in attentional selection, even when the participants could recognize the nontarget shapes. This indicates that selective attention modulated the mere exposure effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of Morphology‐Controlled Plate‐Like Sodium Niobate Particles by Hydrothermal Synthesis

Sodium niobate (NaNbO₃) particles with plate‐like morphology and hexagonal unit cells were prepared by the hydrothermal method. The result of SEM showed that the hexagonal NaNbO₃ were characterized by plate‐like morphology with a diameter of 5–15 μm and a thickness of 1–2 μm. The crucial influences on the morphology and crystal phase of the NaNbO₃, such as concentration of [OH^?], surfactant, and K⁺:Na⁺ ratio, were established. By further calcination treatment, the plate‐like hexagonal NaNbO₃ particles could be completely transformed into perovskite structure without morphology change. The XRD and EBSD results indicate that the major face of the calcined particles is parallel to the crystallographic (001)_pc (pseudo cubic index) plane. Compared with the traditional high‐temperature molten salt method, this work provides a simpler way to prepare the template for fabricating textured ceramics.     

Minimum void ratio characteristic of soils containing non-plastic fines

The minimum void ratio is an index widely used to indicate the contraction characteristics and the densest state of soils. The minimum void ratio obtained by the traditional test method has been utilized to represent the density of soils irrespective of their fines content despite the restriction (FC ≤ 5%). By considering the effect of the blow count, pore water, and their primary properties, the applicability of the minimum void ratio to soils containing fines was examined with an automatic tapping machine. It was confirmed that the blow count of the traditional method is not sufficient for soils with a high fines content. Furthermore, the presence of pore water had a significant effect on the minimum void ratio of soils containing fines. The characteristics of the cyclic minimum void ratio, which indicates the minimum void ratio obtained throughout the repetition of liquefaction and drainage, were also examined.     

Characterization of the Oxide Scale Formed on T12 Water Wall Tube After Long-term Service in Supercritical Power Plant

Oxidation of Metals - Oxide scale control is one of the critical maintenance issues in fossil fuel power plant. Hence, the water treatment of the feed water has been changed from all-volatile...     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

High-melt-strength polypropylene with electron beam irradiation in the presence of polyfunctional monomers

High-melt-strength polypropylene (PP) was achieved with irradiation by an electron beam generated from an accelerator in the presence of polyfunctional monomers (PFM). Among 16 PFMs, the relatively shorter molecular chain bifunctional monomers such as 1,4-butanediol diacrylate (BDDA) and 1,6-hexanediol diacrylate (HDDA) were the most effective for enhancing the melt strength of PP. The concentration and dose of the HDDA to obtain the high melt strength PP in irradiation under nitrogen gas atmosphere were 1.5 mmol/100 g PP and 1 kGy, respectively. DSC measurement and dynamic mechanical analysis showed that the thermal behavior of the high-melt-strength PP was different from that of the original PP. Crystallinity and crystallization temperature during cooling after heating were lower and higher in high melt strength PP than original PP, respectively. Elongational viscosity at 180°C of the high-melt-strength PP showed a remarkable increase at a certain elongational time with constant strain rate, demonstrating the typical property of high-melt-strength samples. This implies that a few higher molecular chains of PP, formed by intermolecular combination of its chain by HDDA in irradiation, give higher melt strength to induce entanglement of molecular chains. © 1996 John Wiley & Sons, Inc.     

Controlling hydrothermal reaction pathways to improve acetic acid production from carbohydrate biomass

A two-step hydrothermal process to improve the production of acetic acid was discussed. The first step was to accelerate the formation of 5-hydroxymethyl-2-furaldehyde (HMF), 2-furaldehyde (2-FA), and lactic acid (LA), and the second step was to further convert the furans (HMF, 2-FA) and LA produced in the first step to acetic acid by oxidation with newly supplied oxygen. The acetic acid obtained by the two-step process had not only a high yield but also better purity. The contribution of two pathways via furans and LA in the two-step process to convert carbohydrates into acetic acid was roughly estimated as 85-90%, and the ratio of the contributions of furans and LA to yield acetic acid was estimated as 2:1. The fact that WO of carbohydrates is not capable of producing a large amount of acetic acid, while the two-step process can enhance the acetic acid yield, can be explained because formic acid is a basic product of direct oxidation of carbohydrate, and acetic acid in WO of carbohydrates may come from the oxidation of dehydration products of aldose.     

Effect of Storage Conditions on 2–Acetyl-1–pyrroline Content in Aromatic Rice Variety, Khao Dawk Mali 105

ABSTRACT: The effect of package and temperature on 2–acetyl-1–pyrroline content in milled aromatic rice during storage was investigated. 2 -Acetyl-1 -pyrroline content was decreased faster at higher storage temperature. However, fat acidity of rice was increased during storage and inversely correlated with 2–acetyl-1–pyrroline content at an early stage of storage. The difference in 2–acetyl-1 -pyrroline recovery from the samples, which were extracted with ethanol at 40 °C and 75 °C, revealed that the starch bound and free forms of 2–acetyl-1–pyrroline may occur in aromatic rice. These results suggested that the biosynthesis of 2–acetyl-1 -pyrroline before starch structure formation in rice kernel could play a key role in the aroma quality of aromatic rice.     

Relationship between local structure and stability in hen egg white lysozyme mutant with alanine substituted for glycine

We prepared five mutant lysozymes in which glycines whose dihedralangles are located in the region of the left-handed helix, Gly49,Gly67, Gly71, Gly102 and Gly117, were mutated to an alanineresidue. From analyses of their thermal stabilities using differentialscanning calorimetry, most of them were more destabilized thanthe native lysozyme, except for the G102A mutant, which hasa stability similar to that of the native lysozyme at pH 2.7.As for the destabilized mutant lysozymes, their X-ray crystallographicanalyses showed that their global structures did not changebut that the local structures changed slightly. By examiningthe dihedral angles at the mutation sites based on X-ray crystallographicresults, it was found that the dihedral angles at these mutationsites tended to adopt favorable values in a Ramachandran plotand that the extent and direction of their shifts from the originalvalue had similar tendencies. Therefore, the change in dihedralangles may be the cause of the slight local structural changesaround the mutation site. On the other hand, regarding the mutationof G102A, the global structure was almost identical with thatof the native structure but the local structure was drasticallychanged. Therefore, it was suggested that the drastic localconformational change might be effective in releasing the unfavorableinteraction of the native state at the mutation site.