Distribution of double bonds in thermally degraded polyisobutylene

The distribution of double bonds in thermally degraded polyisobutylene was determined quantitatively by using pulsed Fourier transform ¹H n.m.r. spectroscopic analysis. The double bonds in the degraded polymer did not exist in the interior but at the terminal positions of the polymer chain. These olefins were of the terminal trisubstituted and terminal vinylidene types. The content of the former was much greater than that of the latter. This shows that radical chain transfer predominantly occurs at the methylene hydrogen rather than at the methyl groups of the polymer chain. The average number of double bonds per molecule, f, was greater than 1 and tended to be near 2. Thereby most of the degraded polyisobutylene was shown to have two terminal unsaturations per molecule.     

Crystallization in rapid quenching of La0.33NbO3 melt

Transparent La_0.33NbO₃ flakes were fabricated by a rapid quenching technique. The quenched La_0.33NbO₃ phase takes a simple cubic perovskite structure and cation vacancies are randomly distributed on the A sites. The cubic La_0.33NbO₃ phase is a new modification which is different from the well-known orthorhombic phase with ordered A-site vacancies. Transparent flakes were found to show the predominant orientation of (110) and (220) planes.     

Studies on synthesis and permeability of special polymer membranes

Summary The permeation characteristics of polymer blend membranes from poly(vinylidene fluoride) and poly-(ethylene glycol) to aqueous polymer solution were investigated under carefully controlled conditions. The permeation characteristics were influenced significantly by the blend ratio, the temperature and time of heat treatment, which changed the structure of the resulting membranes.     

Effect of temperature on the stereoselectivity of phospholipase D toward glycerol in the transphosphatidylation of phosphatidylcholine to phosphatidylglycerol

In this study, the effect of temperature on the stereoselectivity of phospholipase D (PLD) toward the two primary hydroxyl groups of glycerol in the transphosphatidylation reaction of phosphatidylcholine to phosphatidylglycerol (PtdGro) was investigated. For this purpose, PLD from bacteria (Streptomyces septatus TH-2, S. halstedii subsp. scabies K6, and Actinomadura sp.) and cabbage were tested. At the reaction temperatures employed (0–60°C), the proportions of the two PtdGro diastereomers, namely, 1,2-dioleoyl-sn-glycero-3-phospho-3′-sn-glycerol (R,R configuration) and 1,2-dioleoyl-sn-glycero-3-phosphol-1′-sn-glycerol (R,S configuration), which were produced with PLD from Streptomyces TH-2 and Actinomadura sp., changed gradually from 50% R,R and 50% R,S at 50–60°C to 70% R,R and 30% R,S at O°C. These alterations suggested that the stereoselectivity of the bacterial PLD toward the two primary hydroxyl groups of prochiral glycerol was significantly influenced by reaction temperature. PLD from Streptomyces K6 showed relatively little effect of temperature on stereoselectivity, giving 65–69% R,R in the temperature range of 60–10°C examined. The plots of In ([R,R]/[R,S]) vs. 1/T gave good linear fits for these three bacterial PLD. No temperature effect was observed for cabbage PLD, which gave an almost equimolar mixture of the R,R and R,S diastereomers in the range from 0 to 40°C. The temperature-dependent change in enantiomeric selectivity of the bacterial PLD promises potentially profitable commercial exploitation.     

Effects of nickel(II) addition on the activity of activated sludge microorganisms and activated sludge process

The effects of Ni(II) in a synthetic wastewater on the activity of activated sludge microorganisms and sequencing batch reactor (SBR) treatment process were investigated. Two parallel lab-scale SBR systems were operated. One was used as a control unit, while the other received Ni(II) concentrations equal to 5 and 10 mg/l. The SBR systems were operated with FILL, REACT, SETTLE, DRAW and IDLE modes in the time ratio of 0.5:3.5:1.0:0.75:0.25 for a cycle time of 6 h. The addition of Ni(II) into SBR system caused drastically dropped in TOC removal rate (k) and specific oxygen uptake rate (SOUR) by activated sludge microorganisms due to the inhibitory effects of Ni(II) on the bioactivity of microorganisms. The addition of 5 mg/l Ni(II) caused a slight reduction in TOC removal efficiency, whereas 10 mg/l Ni(II) addition significantly affected the SBR performance in terms of suspended solids and TOC removal efficiency. Termination of Ni(II) addition led to almost full recovery of the bioactivity in microorganisms as shown in the increase of specific oxygen uptake rate (SOUR) and SBR treatment performance.     

Observation of polarization property in near-field optical imaging by a polarization-maintaining fiber probe

We fabricated an original near-field scanning optical microscopy (NSOM) fiber probe made of polarization-maintaining and attenuation-reducing (PANDA)-type polarization-maintaining optical fiber, and observed the polarization property of propagation light in a polymer optical waveguide. The distribution of the transmission coefficient in polarization angles through this NSOM probe showed that the linear polarization is maintained in the two crossing directions: the fast and slow axes. The polarization degree parallel to the slow axis decreases from 1000:1 to 2:1 by bending the fiber probe and the decrease is independent of the bending direction. Using this PANDA-type NSOM probe, we investigated the polarization property of periodic intensity modulation. It was found that the intensity modulation was observed clearly with the electric vector parallel to the radius direction of the waveguide, but was observed vaguely with the electric vector perpendicular to the radius direction.     

Inhibitory effect of high concentrations of ferric ions on the activity of Acidithiobacillus ferrooxidans

The influence of high concentrations of ferric ions on the biochemical activity of Acidithiobacillus ferrooxidans was studied using intact cells. The specific oxidation rate of ferrous ions decreased with increasing ferric ion concentration. Lineweaver-Burk plots revealed typical competitive inhibition kinetics, because the slopes varied with the ferric ion concentration. A linear relationship between the slope and the square of the ferric ion concentration revealed that the iron-oxidizing enzyme system of A. ferrooxidans was competitively inhibited by about two molecules of ferric ion. The kinetic equation based on this inhibition model agreed with the experimental observation at a high ferric ion concentration where the bacterium is usually exposed in bioleaching and biooxidation plants.     

Superconducting Density of States from the Magnetic Penetration Depth of Electron-Doped Cuprates La2−x Ce x CuO4−y and Pr2−x Ce x CuO4−y

From measurements of the magnetic penetration depth, (T), from 1.6 K to T _c in films of electron-doped cuprates La_2–x Ce _x CuO_4–y and Pr_2–x Ce _x CuO_4–y we obtain the normalized density of states, N _s(E) at T=0 by using a simple model. In this framework, the flat behavior of ^–2(T) at low T implies N _s(E) is small, possibly gapped, at low energies. The upward curvature in ^–2(T) near T _c seen in overdoped films implies that superfluid comes from an anomalously small energy band within about 3k _B T _c of the Fermi surface.     

Characterization of polymer-adhesive interfaces on a nanometre scale by elemental mapping and image EELS using EFTEM

Energy-filtering transmission electron microscopy (EFTEM) was applied for investigating interfaces between a polymer and an adhesive. The sample employed in this work is polybutylene terephtharate (PBT) sheets laminated with an epoxy adhesive. It was found that heat aging of the PBT at 180 degrees C in air for > 9 h prior to adhesion decreases the adhesion strength drastically. To investigate this unfavourable aging effect on the adhesion strength, we performed elemental mapping and image EELS using EFTEM. A weak boundary layer with a thickness of < 50 nm was visualized at the PBT-adhesive interface by elemental mapping in the sample subjected to the heat aging and image EELS revealed the origin of this layer. Thus, we clearly correlated the nanoscale interfacial structure with the adhesion strength by EFTEM.