Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

NAD+‐Dependent Dehydrogenase PctP and Pyridoxal 5′‐Phosphate Dependent Aminotransferase PctC Catalyze the First Postglycosylation Modification of the Sugar Intermediate in Pactamycin Biosynthesis

The unique five‐membered aminocyclitol core of the antitumor antibiotic pactamycin originates from d ‐glucose, so unprecedented enzymatic modifications of the sugar intermediate are involved in the biosynthesis. However, the order of the modification reactions remains elusive. Herein, we examined the timing of introduction of an amino group into certain sugar‐derived intermediates by using recombinant enzymes that were encoded in the pactamycin biosynthesis gene cluster. We found that the NAD⁺‐dependent alcohol dehydrogenase PctP and pyridoxal 5′‐phosphate dependent aminotransferase PctC converted N‐acetyl‐d ‐glucosaminyl‐3‐aminoacetophonone into 3′‐amino‐3′‐deoxy‐N‐acetyl‐d ‐glucosaminyl‐3‐aminoacetophenone. Further, N‐acetyl‐d ‐glucosaminyl‐3‐aminophenyl‐β‐oxopropanoic acid ethyl ester was converted into the corresponding 3′‐amino derivative. However, PctP did not oxidize most of the tested d ‐glucose derivatives, including UDP‐GlcNAc. Thus, modification of the GlcNAc moiety in pactamycin biosynthesis appears to occur after the glycosylation of aniline derivatives.     

Selective catalytic reduction of nitrogen oxides with hydrocarbons over Zn–Al–Ga complex oxides

Selective reduction of NO with hydrocarbons was studied using metal oxide catalysts having a spinel structure. A Zn–Al–Ga complex oxide was found to be very active and selective for the catalytic reduction of NO with both C₃H₆ and CH₄. It was revealed that the role of oxygen at the initial stage of the reaction strongly depends on the reductants; oxygen is mainly used for NO oxidation to NO₂ in the reduction with CH₄, whereas it is used both for NO oxidation to NO₂ and oxidation of C₃H₆ to an active intermediate in the reduction with C₃H₆. This revised version was published online in July 2006 with corrections to the Cover Date.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Dielectric properties of woven fabric glass fiber reinforced polymer-matrix composites in the THz frequency range

Electromagnetic wave transmittances of plain woven fabric glass fiber reinforced epoxy matrix composite (PW-GFRP) and eight-harness-stain fabric glass fiber reinforced polyimide matrix composite (8H-GFRP) with 1.0 mm thickness were measured in a terahertz (THz) frequency range. The transmittance values for both composites are nearly zero at a frequency of 1.0 THz. The real parts of the complex dielectric constant, ε′(ω) are 4.45 and 3.87 for PW-GFRP and 8H-GFRP, respectively, in the frequency range from 0.2 to 1.0 THz, and they are almost frequency independent. Conversely, the imaginary parts of the dielectric constant, ε′′(ω) for both composites linearly increases with increase of the frequency from 0.13 to 0.37 for PW-GFRP, and from 0.12 to 0.33 for 8H-GFRP.     

Mercury oxidation by hydrochloric acid over TiO2 supported metal oxide catalysts in coal combustion flue gas

Mercury oxidation by hydrochloric acid over the metal oxides supported by anatase type TiO₂ catalysts, 1 wt.% MO_x/TiO₂ where M = V, Cr, Mn, Fe, Ni, Cu, and Mo, was investigated by the Hg⁰ oxidation and the NO reduction measurements both in the presence and absence of NH₃. The catalysts were characterized by BET surface area measurement and Raman spectroscopy. The metal oxides added to the catalyst were observed to disperse well on the TiO₂ surface. For all catalysts studied, the Hg⁰ oxidation by hydrochloric acid was confirmed to proceed. The activity of the catalysts was found to follow the trend MoO₃ ~ V₂O₅ > Cr₂O₃ > Mn₂O₃ > Fe₂O₃ > CuO > NiO. The Hg⁰ oxidation activity of all catalysts was depressed considerably by adding NH₃ to the reactant stream. This suggests that the metal oxide catalysts undergo the inhibition effect by NH₃. The activity trend of the Hg⁰ oxidation in the presence of NH₃ was different from that observed in its absence. A good correlation was found between the NO reduction and the Hg⁰ oxidation activities in the NH₃ present condition. The catalyst having high NO reduction activity such as V₂O₅/TiO₂ showed high Hg⁰ oxidation activity. The result obtained in this study suggests that the oxidation of Hg⁰ proceeds through the reaction mechanism, in which HCl competes for the active catalyst sites against NH₃. NH₃ adsorption may predominate over the adsorption of HCl in the presence of NH₃.     

Linkage between polarisation characteristics over two different patterns of instantaneous large DGD occurrence

Through long-term field fibre PMD measurement, two occurrence patterns of large instantaneous differential group delays (DGDs), of less than 10^-5 probability, were observed. Most high DGD occurrences, which continue more than hours in limited bandwidth, clearly show positive correlation with ambient temperature even though most of the fibres are buried; and only an emergent spike, which seems not to relate to temperature, was also recorded. In both patterns, second-order polarisation mode dispersion on the wavelength at the same timing has local maximum values with the same occurrence patterns, but PDL does not have local maximum values on the wavelength at the same timing.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.