Effects of 4He impurities on 3He nuclear spin-lattice relaxation in hcp solid 3He

Nuclear spin-lattice relaxation properties of hcp solid ³He with ⁴He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the ⁴He-⁴He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T ^–n with n = 7.4±0.3.     

Dynamic alternation of primate response properties during trial-and-error knowledge updating

Humans and animals seek appropriate solutions to novel problems through trial-and-error (TE) actions and observation of their outcomes. Once an individual has obtained the knowledge (rule) to solve a problem, knowledge-based (KB) actions may be applied in a stereotypical manner. Solutions can thus be based on TE or KB actions. To characterize this learning process at the behavioral level, we developed a new cognitive task for a laboratory monkey (Macaca fuscata) to perform. In this task, a search array consisting of six elements of different colors was presented, one of which was the behaviorally relevant target. The target color was changed unpredictably with no instruction or signal, requiring the monkey to use a TE search strategy to find the target color. We found that once the monkey identified the relevant color by chance after a color change, correct performance increased in a step-like manner and at the same time, other response properties (reaction time and color-choice tendency) also changed discontinuously. These step-like alternations in behavioral performance may be attributed to the subject’s switching between TE and KB search strategies in the two phases. The present study has therefore provided behavioral evidence for the timing and manner of switching between search strategies during the process of updating knowledge.     

Payments for watershed services: Directing incentives for improving lake basin governance

This study introduces the emerging integrated ecosystem management approach known as Payments for Watershed Services (PWS) as utilized for lake and reservoir basin governance. PWS is built on the central concept of providing economic incentives to watershed stakeholders to assist in management efforts. It channels conservation payments from downstream payers to finance conservation activities conducted by upstream payees. The upstream conservation activities are expected to enhance ecosystem functions, thereby improving water‐related ecosystem services desired by downstream stakeholders. Information on 163 PWS projects in 34 developing countries through the year 2008 was collected and analysed, including their common goals, processes, outcomes, scientific assumptions and socioeconomic rationales. This study recognized one unique PWS characteristic, namely the role of intermediary organizations (i.e. brokers) in integrating the economic incentives of upstream payees and downstream payers in order to facilitate their transactions by means of contracts. Although 75% of the reviewed PWS projects have focused on rivers, and only 10% have considered lakes and reservoirs, the similarity of the intermediary functions performed by lake management organizations and PWS intermediary organizations suggests a greater potential for the future application of PWS designs in lake basins. Drawing on components in the field of New Institutional Economics to interpret the intermediary function within the PWS framework, a three‐part PWS design with 15 steps is proposed in this study for lake basin governance, with a Costa Rican PWS scheme serving as an illustration. This study seeks to communicate the scientific and socioeconomic frontiers for developing locally suitable and integrated watershed governance structures to lake management organizations and other watershed stakeholder groups.     

Effects of hematocrit variations on cerebral blood flow and oxygen transport in ischemic cerebrovascular disease

The contribution of hematocrit (Ht) changes on cerebral blood flow (CBF) and brain oxygenation in ischemic cerebrovascular disease is still controversial. In the present study, effects of Ht variations of CBF and oxygen delivery were investigated in patients with ischemic cerebrovascular disease. CBF was measured by the Xe-133 intracarotid injection method in 27 patients, whose diagnoses included completed stroke, reversible ischemic neurological deficit, and transient ischemic attack. Ht values in the patients ranged from 31 to 53%. There was a significant inverse correlation between CBF and Ht in these Ht ranges. Oxygen delivery, i.e., the product of arterial oxygen content and CBF, increased with Ht elevation and reached the maximum level in the Ht range of 40-45% and then declined. The CBF-Ht and oxygen transport-Ht relations observed in our study were similar to those in the glass-tube model studies by other workers rather than to those in intact animal experiments. From these results, it is conceivable that in ischemic cerebrovascular disease, the vasomotor adjustment was impaired in such a manner that the relations among Ht, CBF, and oxygen delivery were different from those in healthy subjects. Further, an "optimal hematocrit" for brain oxygenation was also discussed.     

Analysis of accelerated creep under constant sustaining load for austenitic stainless steels

The effect of stress on creep rate of austenitic stainless steels of type 347 and 316 was studied by applying the differential test technique. It was found that the creep rate could be expressed as follows, whereB ₁ is a material constant depending on temperature,a ₁ anda _o are constants, and σ is the real stress. Considering the increase in real stress during creep process due to void formation and to the decrease in cross sectional area of the specimen, integrating the above equation yields the following creep curve, 1 $$ \in = \in _m + \frac{1}{{n_o \left( {c_o + 1} \right)}}ln\frac{1}{{1 - n_o \left( {c_o + 1} \right) \in _m (t - t_{_m } )}}$$ where ∈ is the creep strain at a given time (t), ∈_m is the minimum creep rate, ∈_m andt _m are the strain and time, respectively, at the minimum creep rate,n _o is a constant, andc _o is the material constant relating to the void formation. This equation agrees very well with the experimental creep curve.     

Size Distribution of Gold Nanoparticles Used by Small Angle X-ray Scattering

The size distribution of gold nanoparticles was estimated based on the scattering intensity data obtained from small angle X-ray scattering (SAXS) and compared with the result of micrographs by transmission electron microscopy. The slope of the Guinier plot was used to estimate the mean size assuming a narrow particle size distribution. When the size distribution is narrow, the mean size can be easily obtained from slope of a Guinier plot of scattering data within 10% error. Additionally, assuming a lognormal size distribution, the size distribution and the mean size can be calculated using the experimental SAXS data in the fitting analysis. The histogram method, which utilizes the coefficient matrix of scattering intensity, was also applied to the estimation of the size distribution, and this method could be useful for a rough estimate of the size distribution.     

Fabrication of particle-free thin films by laser ablation combined with an electron beam

Particle-free silicon and nickel thin films were successfully fabricated by laser-ablating a melted section of their target surface, which gives a high evaporation pressure at the melting point. The influence of direct evaporation from a melted target was reduced negligibly by melting the target only locally with a focused electron beam (e-beam) and increasing the laser frequency. The silicon films fabricated by the present method, pulse laser deposition of a partially molten target, were able to firmly adhere to the substrates and withstood steel needle scratching, unlike e-beam-evaporated films.     

Plasma etching of high-k and metal gate materials

Etching characteristics of high-k dielectric materials (HfO₂) and metal electrode materials (Pt, TaN) have been studied in high-density chlorine-containing plasmas at pressures around 10 mTorr. The etching of HfO₂ was performed in BCl₃ without rf biasing, giving an etch rate of about 5 nm/min with a high selectivity of >10 over Si and SiO₂. The etching of Pt and TaN was performed in Ar/O₂ with high rf biasing and in Ar/Cl₂ with low rf biasing, respectively, giving a Pt etch rate of about several tens nm/min and a TaN etch rate of about 200 nm/min with a high selectivity of >8 over HfO₂ and SiO₂. The etched profiles were outwardly tapered for Pt, owing to the redeposition of etch or sputter products on feature sidewalls, while the TaN profiles were almost anisotropic, probably owing to the ion-enhanced etching that occurred.     

Stiffness-Damping Simultaneous Identification under Limited Observation

A more reliable and stable method, compared to the previous one developed by the present writers, of stiffness-damping simultaneous identification of shear-type building structures is proposed using stationary random records under limited observation. It is shown that when stationary random horizontal accelerations are recorded at the floors just above and below a specific story in a shear building model, the story stiffness and the damping ratio can be identified uniquely. The viscous damping coefficient and the material damping ratio can also be identified simultaneously in a numerical model structure. It is also shown that unfavorable effects by extraneous noises, including measurement noises, due to wind excitation, building facilities, and the motion of the occupants can be eliminated partially by using the present method. The accuracy of the present identification method is investigated through the actual records under limited observation in a base-isolated building.     

A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials

Numerical investigations are conducted to simulate high-speed crack propagation in pre-strained PMMA plates. In the simulations, the dynamic material separation is explicitly modeled by cohesive elements incorporating an initially rigid, linear-decaying cohesive law. Initial attempts using a rate-independent cohesive law failed to reproduce available experimental results as numerical crack velocities consistently overestimate experimental observations. As proof of concept, a phenomenological rate-dependent cohesive law, which bases itself on the physics of microcracking, is introduced to modulate the cohesive law with the macroscopic crack velocity. We then generalize this phenomenological approach by establishing a rate-dependent cohesive law, which relates the traction to the effective displacement and rate of change of effective displacement. It is shown that this new model produces numerical results in good agreement with experimental data. The analysis demonstrates that the simulation of high-speed crack propagation in brittle structures necessitates the use of rate-dependent cohesive models, which account for the complicated rate-process of dynamic fracture at the propagating crack tip.