Note: detection of micro-cracks in the interlayer dielectric film by the stress based light scattering method

A phenomenon was discovered wherein light scattering strength from cracks increases when tensile stress is applied to micro-cracks produced in the interlayer dielectric film by chemical mechanical polishing treatment. It is likely that the change in light scattering intensity occurs because a region of high stress concentration (region with high variation in index of refraction) is produced near the crack tip due to stress, thus forming a type of scatterer. With this method, it is possible to detect only scatterers which respond to stress, and thus, it is possible to classify and separately detect cracks and particles.     

Microstructure and properties of (Sr, Ca)CuO2/(Sr, Ca)RuO3 multilayers

Epitaxial multilayer thin films of infinite-layer (Sr, Ca)CuO₂ and perovskite (Sr, Ca)RuO₃ have been prepared on (100) SrTiO₃ substrates by multitarget rf magnetron sputtering. X-ray diffraction analyses revealed that the multilayer structure of (Sr, Ca)CuO₃/(Sr, Ca)RuO₃ was successfully fabricated with a minimum layer thickness of 20 Å. Transmission electron microscopy measurements of the multilayers indicated that there was no dislocation which normally exists in single-layer films with an infinite-layer structure. Resistivities of multilayer films at room temperature ranged from 1 to 10 m cm and showed semiconductor-like dependence against the temperature.     

Data-driven dual-rate cascade control and application to pitch angle control of UAV

A data-driven design method for a cascade control system is proposed. The cascade control system consists of inner and outer loops, where the control interval of the outer loop is an integer multiple of the inner loop; hence, the system is a dual-rate system. In the proposed method, controllers in the inner and outer loops are designed based on one-shot data. In such a dual-rate cascade system, since the controllers are designed using different data-rate signals, the lifting technique is applied to align the dual-rate data. To show its effectiveness, the proposed method is compared with a conventional single-rate cascade control method, and numerical simulations and experiments are presented to examine servo and regulation performance.     

The "first generation" of endovascular stent-grafts for patients with aneurysms of the descending thoracic aorta

OBJECTIVE: Our goal was to determine whether endovascular stent-grafting is feasible and effective for patients with aneurysms of the descending thoracic aorta. METHODS: Starting in July 1992, we conducted a prospective, uncontrolled clinical trial in 103 patients (mean age 69 years [range 34-89 years]) who underwent endovascular treatment of aneurysms of the descending thoracic aorta using a custom-fabricated, self-expanding stent-graft device. Follow-up was 100% complete and averaged 22 months. Sixty-two patients (60%) were judged not to be reasonable candidates for a conventional "open" surgical procedure. RESULTS: Complete thrombosis of the aneurysm was ultimately achieved in 86 (83%) patients. The early mortality rate was 9% +/- 3% (+/- 70% CL). Multivariable analysis revealed that myocardial infarction or stroke was linked with a higher likelihood of early death (P = .001). Early serious complications included paraplegia in 3% +/- 2% and stroke in 7% +/- 3%. Actuarial survival estimates at 1 year and 2 years were 81% +/- 4% and 73% +/- 5% (+/- 1 SE), respectively; being judged not to be a surgical candidate portended a higher probability of death (P = .003). According to the intent-to-treat principle, "treatment failure" (including all late sudden unexplained deaths) occurred in 38 patients; 53% +/- 10% of patients were free from treatment failure at 3.7 years. Stent-graft related complications occurred commonly and were linked with several anatomic, technical, and patient-related risk factors. CONCLUSIONS: This 5-year clinical trial involving use of a "first generation" device indicates that endovascular stent-grafting of descending thoracic aortic aneurysms is feasible with acceptable medium-term results. More refined, commercially developed devices available today offer less traumatic and more precise stent-graft deployment; these major technical advantages, coupled with important lessons we have learned over time and better patient selection, should be associated with more salutary clinical results in the future.     

Differential expression of laminin receptors in human hepatocellular carcinoma

Distortion-product otoacoustic emissions (DPOAEs) have been shown to be ideally sensitive to interruptions of the cochlear blood flow. However, a 15- to 30-second latency typically occurs between cessation of circulation and measurable DPOAE level changes. DPOAEs can also be characterized by phase measures. The aim of the present study was to determine in 10 rabbits the effects on DPOAE phase of repetitively compressing the internal auditory artery. In contrast to the delays measured by DPOAE level, phase changes were detected 1 to 5 seconds after internal auditory artery compression. These data suggest that the essentially "real time" monitoring of cochlear function with DPOAE phase can be used to ensure hearing preservation during surgery involving the porus acousticus and skull base.     

Effects of azelastine on the level of serum interleukin-4 and soluble CD23 antigen in the treatment of nasal allergy

Research findings and various published studies point to interleukin 4 (IL-4) and CD23 antigen as instrumental in allergic reactions of allergy patients because these two substances are part of the main triggering mechanisms in cells producing IgE antibodies. In this study it was investigated whether the control of IL-4 and CD23 levels result in a decrease of the severity of allergic reactions. It is well known that azelastine hydrochloride (AZ, CAS 79307-93-0) suppresses symptoms of nasal allergy. The antiallergic activity of this drug includes the suppression of IgE antibody production, antigen-antibody reactions, liberation of mediators and mediator antagonism. One report states that the cytokines IL-2, IL-3, and IL-4 were suppressed by AZ in cultured cells. There have been no reports regarding cytokines in clinical treatment using AZ. Therefore, the effects of AZ treatment on IL-4, soluble CD23, and RAST (radioallergosorbent test) levels in the sera of allergic rhinitis patients were studied. The results show that the levels of IL-4 and soluble CD23 were significantly reduced by the administration of AZ over a 4-week period, especially in patients with "excellent" or "good" efficacy of therapy.     

A novel interferon regulatory factor family transcription factor, ICSAT/Pip/LSIRF, that negatively regulates the activity of interferon-regulated genes

We have isolated a novel cDNA clone encoding interferon (IFN) consensus sequence-binding protein in adult T-cell leukemia cell line or activated T cells (ICSAT); this protein is the human homolog of the recently cloned Pip/LSIRF. ICSAT is structurally most closely related to the previously cloned ICSBP, a member of the IFN regulatory factor (IRF) family of proteins that binds to interferon consensus sequences (ICSs) found in many promoters of the IFN-regulated genes. Among T-cell lines investigated, ICSAT was abundantly expressed in human T-cell leukemia virus type 1 (HTLV-1)-infected T cells. When the HTLV-1 tax gene was expressed or phorbol myristake acetate-A23187 stimulation was used, ICSAT expression was induced in Jurkat cells which otherwise do not express ICSAT. When the binding of ICSAT to four different ICSs was tested, the relative differences in binding affinities for those ICSs were determined. To study the functional role of ICSAT, we performed cotransfection experiments with the human embryonal carcinoma cell line N-Tera2. ICSAT was demonstrated to possess repressive function over the gene activation induced by IFN stimulation or by IRF-1 cotransfection. Such repressive function is similar to that seen in IRF-2 or ICSBP. However, we have found that ICSAT has a different repressive effect from that of IRF-2 or ICSBP in some IFN-responsive reporter constructs. These results suggest that a novel mechanism of gene regulation by "differential repression" is used by multiple members of repressor proteins with different repressive effects on the IFN-responsive genes.     

Discharge properties and chemical stability of SrZrO films

Abstract— MgO thin film is currently used as a surface protective layer for dielectric materials because MgO has a high resistance during ion sputtering and exhibits effective secondary electron emission. The secondary‐electron‐emission coefficient γ of MgO is high for Ne ions; however, it is low for Xe ions. The Xe content of the discharge gas of PDPs needs to be raised in order to increase the luminous efficiency. Thus, the development of high‐γ materials replacing MgO is required. The discharge properties and chemical surface stability of SrO containing Zr (SrZrO) as the candidate high‐γ protective layer for noble PDPs have been characterized. SrZrO films have superior chemical stability, especially the resistance to carbonation because of the existence of a few adsorption sites due to their amorphous structure. The firing voltage is 60 V lower than that of MgO films for a discharge gas of Ne/Xe = 85/15 at 60 kPa.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.     

Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.