Pore structure of carbons coated on ceramic particles

Pore structure of carbon coated on ceramic particles by carbonization of precursor in a powder mixture at 900 °C was studied by focusing on the effects of substrate ceramics (MgO, TiO₂ and various phases of Al₂O₃) and of carbon precursor (poly(vinyl alcohol) (PVA), poly(ethylene terephthalate) (PET) and hydroxyl propyl cellulose (HPC)). By dissolving substrate MgO particles, carbon coated was found to have a high BET surface area, more than 1000 m²/g, which was almost the same as the value estimated from apparent surface area measured on carbon-coated MgO particles under the assumption of zero surface area of the substrate. The carbon separated was found to be rich in micropores from the analyses by DFT method and α_s plot. The dependence of the BET surface area on the amount of carbon coated on TiO₂ with a high surface area was the same for three carbon precursors, although the carbon yields from the precursors were slightly different. Porous Al₂O₃ substrates, γ-Al₂O₃as-received and that formed from Al(OH)₃ during carbonization, gave a high BET surface area, but dense Al₂O₃, α-Al₂O₃, gave a low surface area.     

Reduction of irreversible capacities of amorphous carbon materials for lithium ion battery anodes by Li2CO3 addition

Amorphous carbon materials for lithium ion battery anodes which contain a small amount of Li₂CO₃ were prepared by three methods. The obtained materials were characterized using X-ray diffraction (XRD) analysis, Raman spectroscopy and CO₂ adsorption experiments. Although the XRD profiles and Raman spectra of these materials were similar to those of carbon materials synthesized with no addition, the amount of CO₂ adsorbed was largely decreased by Li₂CO₃ addition. These results suggest that the micropores in these materials were plugged and/or filled with Li₂ CO₃. Galvanostatic lithium charging and discharging experiments showed that the irreversible capacity of the material can be significantly decreased by Li₂CO₃ addition, which is thought to be due to the plugging of the pore inlets by Li₂CO₃. Moreover, it was also found that the reversible capacities of the materials can be increased by adjusting both the amount of Li₂CO₃ addition and carbonization temperature.     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

A geometric method of sector decomposition

We propose a new geometric method of IR factorization in sector decomposition. The problem is converted into a set of problems in convex geometry. The latter problems are solved using algorithms in combinatorial geometry. This method provides a deterministic algorithm and never falls into an infinite loop. The number of resulting sectors depends on the algorithm of triangulation. Our test implementation shows smaller number of sectors comparing with other existing methods with iterations.     

Template-free hydrothermal synthesis of hollow hematite microspheres

Hollow hematite (α-Fe₂O₃) microspheres with an average diameter of 3-4 μm and a shell thickness of approximate 150 nm was synthesized by a simple hydrothermal route using FeCl₃·6H₂O solution and acetic acid without using any templates. The hollow microspheres were composed of α-Fe₂O₃ nanoparticles with the diameter range from 20 to 40 nm. The effects of reaction parameters such as reaction time, temperature, concentration of FeCl₃·6H₂O solution, and initial pH on the morphology of the final products were investigated. A possible formation mechanism of hollow α-Fe₂O₃ microspheres was also proposed, where the acetic acid played a role of etching in the formation of hollow structure.     

Parity induced edge-current saturation and current distribution in zigzag-edged graphene nano-ribbon devices

We show computationally that the current-voltage characteristics of the zigzag-edged graphene nanoribbon (ZGNR) with the even width exhibit remarkable current saturation behavior in spite of the absence of the bandgap. Mechanism of such current-saturation behavior can be understood to be originated from the symmetries of the wavefunctions corresponding to the edge states in ZGNR. We further demonstrate that the current-voltage characteristics of ZGNR can be drastically changed even by the presence of a single lattice vacancy, with the strong dependence on the position of the vacancy. The origin of such properties is intuitively understood by analyzing the transmission probabilities through such systems.     

(p,q)-Logical completeness for output-coherent sets of (p,q)-Logical functions and an application of the set to image processing

We have previously proposed an idea of p-valued input, q-valued output threshold logic to synthesize many-valued, p-valued, logical networks, and derived the condition for (p, q)-logical completeness for the output-closed set of (p, q)-logical functions. In this paper, the condition for (p, q)-logical completeness for the output-coherent set F of (p, q)-logical functions is described, and the proof is given in almost the same way as for the output-closed set. The output-coherent set F is applied to image processing. That is, a restoration scheme is described for images to which normal random noise is added.     

Dynamic Characteristics Analysis of Two‐DOF Oscillatory Actuator and Experimental Verification of Prototype

Recently, linear oscillatory actuators have been used in a wide range of applications. In particular, small linear oscillatory actuators are expected to be used in haptic devices by being extended to provide multi‐degree‐of‐freedom motion with arbitrary acceleration. In this paper, we propose a compact two‐DOF oscillatory actuator that can move in various directions on a plane. The static and dynamic characteristics of the actuator are determined by the 3D finite element method. The effectiveness of this method is shown through a comparison of the measured results with the experimental results from a prototype. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 58–65, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22312     

Asymmetric electric double layer capacitors using carbon electrodes with different pore size distributions

Asymmetric capacitors composed of carbon electrodes with different pore size distributions (PSD) were constructed in order to study the fundamental relationship between the PSD of positive and negative carbon electrodes and the performance of electric double layer capacitors. The performance of asymmetric capacitors in a non-aqueous electrolyte solution (TEMA·BF₄/PC) was found to be governed by the PSD of the carbon used in the negative electrode. Capacitance depends on the BET surface area of the negative electrode and the rate performance depends on its mesoporous surface area. These results were explained by the fact that it is more difficult to adsorb large solvated cations (TEMA⁺) in micropores (less than 2 nm wide) than in mesopores (2-50 nm wide), and that this is more difficult with a higher rate of charge-discharge.