An aqueous suspension system for phospholipase D-mediated synthesis of PS without toxic organic solvent

Enzymatic synthesis of PS by phospholipase D (PLD)-mediated transphosphatidylation in an aqueous media was investigated. The purpose of this study was to establish a novel synthetic method where no toxic organic solvents were used. An attempt to react soybean lecithin (simply dispersed in an aqueous buffer) with an aqueous solution of l-serine and PLD was unsuccessful, giving only 20% of PS. By contrast, a suspension of lecithin adsorbed on fine powders such as silica was effectively converted into PS in an aqueous solution of l-serine and PLD. After screening various powders for use as the lecithin adsorbent, calcium sulfate was found to be the best with respect to lecithin conversion. In addition, calcium sulfate did not require prior adsorption of lecithin (i.e., the reaction proceeded effectively simply by adding the powder to an aqueous mixture of lecithin, l-serine, and PLD). With this “aqueous suspension system” of calcium sulfate, up to 180 mg/mL lecithin was completely converted, resulting in more than 80% PS in 24 h. The synthesized PS could easily be recovered from the powder by extracting with a mixture of n-hexane, ethanol, and diluted HCl.     

Adaptive searching and replication of images in mobile hierarchical peer-to-peer networks

Due to the limitation of resources in mobile handheld devices and bandwidth constraints in wireless networks, it is important to efficiently manage image content and traffic to improve network throughput and response time. The efficient distribution of images in wireless networks is based on many parameters like the quality of service requirement, available bandwidth, restricted memory and diverse user profiles. We consider digital images as data objects accessed in a hierarchical mobile ad-hoc peer-to-peer network, referred as M-P2P. Our objective is to optimize the number of replicas of images in such a network architecture based on the resource limitations of the requesting peers equipped with miniature mobile devices as well as of wireless constraints in mobile ad-hoc networks (MANET). While replicating images, fragments of different resolution and their residues are used to optimize the traffic in the network and to decrease the search turnaround time. We call this replication algorithm as Ada-Rep. Performance evaluation is done by simulating Ada-Rep, base replication and uniform replication methods to evaluate parameters such as response time, failure rate, memory usage, traffic etc. Our results prove the efficiency and better performance of Ada-Rep.     

Power generation of the touching Cu/Bi-Te/Cu composites under the periodically alternating temperature gradients

The thermo-emf ΔV of the touching p- and n-type Cu/Bi-Te/Cu composites with different thicknesses of t _Bi-Te and t _Cu was measured as a function of time by alternating the temperature difference ΔT at periods of T = 20, 60, 120, 240 and ∞ sec, where t _Bi-Te was varied from 0.1 to 2.0 mm and t _Cu from 0 to 4.0 mm. As a result, ΔV changes significantly with t _Bi-Te, t _Cu and T. The effective thermo-emf ΔV _eff increases significantly with an increase of 1/T and exhibited a local maximum at 1/T = 1/240 s⁻¹. The resultant | α | and the effective temperature difference ΔT _eff were increased significantly by optimizing t _Bi-Te and t _Cu at 1/T = 1/240 s⁻¹. The power generation ΔW _eff (= ΔV _eff²/4R _calc) estimated using the measured ΔV _eff and calculated R _calc also exhibited a local maximum at 1/240 s⁻¹ for an optimum combination of t _Bi-Te = 0.1 mm and t _Cu = 2.0 mm, so that the maxima ΔW _eff at 1/T = 1/240 s⁻¹ for the p- and n-type composites were 2.28 and 2.92 times higher than those obtained at 1/T = 0 s⁻¹. This significant increase in ΔW _eff is owing to both the increase in ΔT _eff and the increase in ZT due to the increase in |α|. The power generation was thus found to be enhanced significantly by imposing the alternating temperature gradients on touching Cu/Bi-Te/Cu composites.     

Thermal Degradation Under Pulse Operation in Low-Temperature p-Channel Poly-Si Thin-Film Transistors

We analyzed the heat generation of a low-temperature polycrystalline thin-film transistor in pulse operation and proposed a technique for accurately measuring its thermal temperature in high-frequency operation. From this measurement, we were able to calculate the time constants for heating and radiation for the first time. At a low frequency, the temperature difference between when the pulse was on and off was remarkable. As the frequency was increased, the maximum and minimum temperatures approached each other and became equal at a frequency of approximately 1 kHz. We also measured the degradation in pulse operation and discussed the relationship between the thermal temperature and the degradation in the pulse operation     

A novel spacer‐free panel structure and glass for FEDs

Abstract— A new design for an FED envelope, composed of box‐shaped front glass, sheet‐like rear glass, and metal members, has been devised. This design structure is effective in reducing tensile stress induced by vacuum at the sealing points. Also, a new glass composition, a new physical tempering method, and a lead‐free hermetic sealing material have been developed. As a result, a novel lightweight spacer‐free panel structure for FEDs has been developed by integrating these new technologies. It will assist in maximizing the essential advantages of FED such as high image quality, high reliability, and low cost.     

Design and evaluation of robot patient for nursing skill training in patient transfer

We developed a robot patient for patient transfer training for simulating a patient’s performance during patient transfer and for enabling nurses to practice their nursing skills on it. To realize the robot patient, we focused on addressing the problems of designing its limb actions to enable it to respond to nurses’ operations. RC servos and electromagnetic brakes were installed in the joints to enable the robot to simulate a patient’s limb actions, such as embracing and remaining standing. To enable the robot to automatically respond to nurses’ operations, an identification method for these operations was developed that used voice commands and the features of the limbs’ posture measured by angle sensors installed in the robot’s joints. The robot patient’s performance was examined by a control test in which four experienced nursing teachers performed patient transfer with the robot patient and a human-simulated patient. The results revealed that the robot patient could successfully simulate the actions of a patient’s limbs according to the nursing teachers’ operations and that it is suitable for nursing skill training.     

Pore-scale visualization of gas trapping in porous media by X-ray CT scanning

Entrapment of the non-wetting phase in porous media has been observed in a variety of fields such as petroleum engineering, geological storage of carbon dioxide, and remediation of ground water. We investigated gas trapping in porous media from a microscopic point of view. High-resolution, three-dimensional images of pore structure and trapped gas bubbles in Berea sandstones were obtained using a micro-focused X-ray CT scanner. We used vertical and horizontal Berea sandstone cores, 8 mm in diameter and 15 mm long. Based on the three-dimensional image analysis, the statistical distribution of the trapped gas volume was estimated. Trapped bubbles have a pore-network scale size and distribute over several pores. In the case of the vertical core, the porosity fluctuates along the flow direction due to the layered structure. The residual gas saturation also fluctuates with porosity along the flow direction. The higher gas saturation in porous layers at the end of gas injection results in a higher trapped gas saturation compared to dense layers. On the other hand, in dense layers the gas saturation at the end of gas injection is almost the same as residual gas saturation. Therefore, most of the gas injected into the dense layers would be trapped. In the case of the horizontal core, the gas saturation at the irreducible water condition is lower than that for the vertical core, because the injected gas selectively passes through the more permeable layers. However, the residual gas saturation is 29.2% for the horizontal core, which is comparable with that for the vertical core (30.9%). Finally, the effect of capillary number on stability of trapped gas bubbles has been estimated. Trapped gas bubbles are stable against the increased flow rate up to a capillary number of 1.0×10^?5.     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

A geometric method of sector decomposition

We propose a new geometric method of IR factorization in sector decomposition. The problem is converted into a set of problems in convex geometry. The latter problems are solved using algorithms in combinatorial geometry. This method provides a deterministic algorithm and never falls into an infinite loop. The number of resulting sectors depends on the algorithm of triangulation. Our test implementation shows smaller number of sectors comparing with other existing methods with iterations.     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.