Sintering Kinetics at Isothermal Shrinkage: II, Effect of Y2O3 Concentration on the Initial Sintering Stage of Fine Zirconia Powder

The shrinkage behavior of fine zirconia powders containing 2.9 and 7.8 mol% Y₂O₃ was investigated to clarify the effect of Y₂O₃ concentration on the initial sintering stage. The shrinkage of powder compact was measured under both conditions of constant rates of heating (CRH) and constant temperatures. CRH measurements revealed that when the Y₂O₃ concentration of fine zirconia powder increased, the starting temperature of shrinkage shifted to a high temperature. Isothermal shrinkage measurements revealed that the increase in Y₂O₃ concentration causes the shrinkage rate to decrease. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. When the Y₂O₃ concentration increases, both Q and β₀ of diffusion increase. It is, therefore, concluded that the increase in Y₂O₃ concentration of fine zirconia powder decreases the shrinkage rate because of increasing Q of diffusion at the initial stage of sintering.     

Application of enzymatically gelled chitosan solutions to water‐resistant adhesives

An investigation was undertaken on the application of dilute chitosan solutions gelled by tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenethylamine (dopamine). The tyrosinase‐catalyzed reaction with dopamine conferred water‐resistant adhesive properties to the semidilute chitosan solutions. The viscosity of the chitosan solutions increased highly by the tyrosinase‐catalyzed reaction and the subsequent reactions between o‐quinone compounds and chitosan. These highly viscous, gel‐like modified chitosan materials were allowed to spread onto the surfaces of the glass slides, which were tightly lapped together and held them in water. Tensile shear adhesive strength of over 400 kPa was observed for the modified chitosan samples. The increase in the amino group concentration of the chitosan solutions and the molecular mass of the chitosan used effectively led to the increase in adhesive strength of the glass slides. In addition, in the case where the chitosan solution was gelled by the enzymatic reaction with dopamine in the presence of poly(ethylene glycol), adhesive strength sharply increased at shorter reaction times concomitantly with the increase in the viscosity of the chitosan solutions because the tyrosinase activity effectively was retained by poly(ethylene glycol). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1818–1827, 2007     

Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles

The electrochemical behaviour of carbon steel coated with bis-[trimethoxysilylpropyl]amine (BTSPA) filled with silica nanoparticles in naturally aerated 0.1 mol L^− 1 NaCl solutions was evaluated. The coating was prepared by adding different concentrations of silica nanoparticles (100, 200, 300, 400 and 500 ppm) to the hydrolysis solution and then a second layer without silica nanoparticles was applied. The electrochemical behavior of the coated steel was evaluated by means of open-circuit potential (E_OC), electrochemical impedance spectroscopy (EIS) and polarization curves. Surface characterization was made by atomic force microscopy (AFM), and its hydrophobicity assessed by contact angle measurements. EIS diagrams have shown an improvement of the barrier properties of the silane layer with the silica addition, which was further improved on the bi-layer system. However, a dependence on the filler concentration was verified, and the best electrochemical response was obtained for samples modified with 300 ppm of silica nanoparticles. AFM images have shown a homogeneous distribution of the silica nanoparticles on the sample surface; however particles agglomeration was detected, which degraded the corrosion protection performance. The results were explained on the basis of the improvement of the barrier properties of the coating due to the filler addition and on the onset of defective regions on the more heavily filled coatings allowing easier electrolyte penetration.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Synthesis of functional π-conjugated polymers from aromatic acetylenes

Because of their unique structures and properties, π-conjugated polymers have attracted the attention of scientists and engineers. The authors have studied the synthesis of two kinds of π-conjugated poly(aromatic acetylene)s, i.e. poly(arylacetylene)s and poly(aryleneethynylene)s with the aim of obtaining new polymers having novel functions or higher performances. This review mainly concerns the authors' results, as follows: first, we describe the synthesis and properties of achiral poly(arylacetylene)s, containing trimethylsilyl groups, oligodimethylsiloxanyl groups, dendritic groups, and glavinoxyl groups, for application as oxygen permselective membrane materials. Their self-membrane-forming abilities and high oxygen permeabilities are presented. Second, the synthesis by asymmetric-induced polymerization of chiral poly(arylacetylene)s having both a main-chain chirality and chiral pendant groups and their application as optical resolution membranes are described. Third, two new synthetic methods for preparing chiral helical poly(phenylacetylene)s without the coexistence of any other chiral moieties are presented. One is helix-sense-selective addition polymerization and the other is in situ removal of chiral pendant groups from membranes of poly(arylacetylene)s that also contain a main-chain chirality. The chiral helical poly(arylacetylene)s were tested as optical resolution membranes. The chiral and achiral poly(arylacetylene)s were synthesized by addition polymerization using metathesis catalysts or rhodium complexes. Finally, the synthesis of regiospecific poly(aryleneethynylene)s bearing stable radicals by the polycondensation of bromoethynylanthracene derivatives using a Pd(0) complex is described. The magnetization and the static magnetic susceptibility of the polyradicals are explained.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Oxidation products of cyanidin 3-O-β-d-glucoside with a free radical initiator

Recently, we have reported that anthocyanins show strong antioxidative activity, but no attention has been paid to anthocyanins from the viewpoint of the reaction mechanism of alkylperoxyl radicals; therefore, we investigated the reaction products of antioxidative anthocyanins (cyanidin 3-O-β-d-glucoside). Cyanidin 3-O-β-d-glucoside was reacted with 2,2′-azobis(2,4-dimet hylvaleronitrile) to generate the alkylperoxyl radicals, and the reaction products were isolated by high-performance liquid chromatography. The products were identified as 4,6-dihydroxy-2-O-β-d-glucosyl-3-oxo-2,3-dihydrobenzofuran and protocatechuic acid. Based on reaction products, the antioxidative mechanism of cyanidin 3-O-β-d-glucoside may be different from that of α-tocopherol; cyanidin 3-O-β-d-glucoside would produce another radical scavenger, as it would break down the structure and scavenge the radicals.     

Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.