Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

Immunoassay method for the determination of immunoglobulin G using bacterial magnetic particles.

We have developed a novel immunoassay method using bacterial magnetic particles for the determination of immunoglobulin G (IgG). Fluorescein isothiocyanate (FITC) conjugated anti IgG-bacterial magnetic particles were prepared. The fluorescence quenching caused by agglutination of FITC-anti IgG antibody-bacterial magnetic particle conjugates was measured by using a fluorescence spectrophotometer. The aggregates based on specific immunoreaction were separated by a gelatin solution. The aggregation of bacterial magnetic particle conjugates was enhanced by application of a magnetic field. The relative fluorescence intensity correlated linearly with a concentration of IgG in the range 0.5-100 ng/mL.     

BMDP program for piecewise linear regression

Piecewise linear regression has potentially broad applications in medical data analysis as well as other types of regression. Various kinds of algorithms have been proposed for finding optimum piecewise linear regressions. This paper presents a BMDP program for obtaining near optimum piecewise linear regression equations. An idea intrinsic to the method is that restricting parameter space to a discrete set makes the difficult problems become standard problems. Any software having the variable selection feature in the multiple linear regression can be used to apply the method.     

Dynamic properties of an all solid-state frequency-shifted feedbacklaser

Frequency-shifted feedback (FSF) laser exhibits outstanding features in its oscillation spectrum. We analyze build-up dynamic properties of the FSF laser by means of rate equation and analyze steady-state dynamic properties of the FSF laser by means of Wigner-Ville distribution of intracavity electric field. Furthermore, we analyze instantaneous oscillation frequency at peak spectral intensity and oscillation bandwidth of its spectrum using the formula of instantaneous spectral intensity derived from Wigner-Ville distribution of intracavity electric field. These analytical results are in good agreement with the experimental ones which have been observed by a diode-pumped Nd:YVO₄ FSF laser. It becomes clear that the FSF laser supports many frequency components simultaneously even though the gain medium is homogeneously broadened and has a continuously chirped frequency components of comb in which the creation of chirped frequency components are strongly correlated in phase because of a replica of the preceding components. Also, the instantaneous oscillation frequency is closely related to the detuning frequency which depends on the total net gain in the cavity and the gain bandwidth of atomic transition. The oscillation bandwidth is defined as the product of the saturation-broadened bandwidth and the total resonant modes contributing to FSF operation     

Fully methylated oriC with negative superhelicity forms an oriC-membrane complex before initiation of chromosome replication

In an in vitro assay, the oriC DNA has been shown to bind to the outer membrane fraction only when it is hemimethylated (G.B. Ogden et al., Cell, 54, 127-135,1988). In this report, however, we demonstrated that a significant amount of the oriC DNA was recovered from the cells just before initiation with the oriC DNA being fully methylated. Formation of this preinitiation oriC-membrane complex and following initiation of chromosome replication were strongly inhibited by novobiocin, a DNA gyrase B subunit inhibitor, which reduced the superhelicity of the reporter plasmid in the cells. On the other hand, both reactions proceeded in the presence of nalidixic acid, a DNA gyrase A subunit inhibitor, which did not have the effect of reducing the superhelicity. These results suggest that the negative superhelicity of the DNA is required for preinitiation oriC-membrane complex formation and following initiation event of replication.     

Time-space method for multidimensional melting and freezing problems

In this paper, the time–space method (TSM) for multidimensional melting and solidification problems is proposed. In the proposed TSM, the timewise co-ordinate is incorporated into one of the spatial co-ordinates, thereby transforming the usual transient 2-D (or 3-D) problems into steady 3D (or 4-D) boundary-value problems. Since time integration is not necessary, the TSM has a feature that eliminates the so-called numerical instability which has been a great concern in the principal numerical methodologies in the past. That is, no error propagation in the timewise direction occurs in the TSM calculation. The TSM is applicable to almost all transient heat transfer and flow problems. The computer running time will be reduced to only 1/100th–1/1000th of the existing schemes for 2-D or 3-D problems. The sample calculations are presented for a 2-D melting problem in a square cavity and the validity of the present method is examined.     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

A 220-MHz pipelined 16-Mb BiCMOS SRAM with PLL proportionalself-timing generator

This 512 Kw×8 b×3 way synchronous BiCMOS SRAM uses a 2-stage wave-pipeline scheme, a PLL self-timing generator and a 0.4-μm BiCMOS process to achieve 220 MHz fully-random read/write operations with a GTL I/O interface. Newly developed circuit technologies include: 1) a zig-zag double word-line scheme, 2) a centered bit-line load layout scheme, and 3) a phase-locked-loop (PLL) with a multistage-tapped ring oscillator which generates a clock cycle proportional pulse (CCPP) and a clock edge lookahead pulse (CELP)