Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Correlation of reactivity to hydrogenation and chemical structure of lignites

Three North Dakota lignites with almost the same percentage carbon have been used to determine the relation between chemical structure and reactivity to hydrogenation. Average structural indices of the lignites were estimated using the pyridine-soluble products after alcohol-alkali treatment, the structural indices obtained at various reaction times being extrapolated to zero reaction time. Hydrogenation was influenced by the average structure, with the lignite having higher aromaticity, higher molecular weight of the pyridine extract from the alcohol-alkali reaction product, larger aromatic ring size and lower content of aliphatic structure, showing a smaller degree of conversion.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Modeling of distribution parameter,void fraction covariance and relative velocity covariance for upward steam-water boiling flow in vertical rod bundle

In order to improve the prediction accuracy of one-dimensional interfacial force formulated by ‘Andersen’ approach, the distribution parameter in a drift–flux correlation, void fraction covariance, and relative velocity covariance has been modeled for dispersed boiling two-phase flow in a vertical rod bundle. The distribution parameter has been derived by a bubble-layer thickness model. The correlations of void fraction covariance and relative velocity covariance have been developed based on prototypic 8 × 8 rod bundle data. The correlation of void fraction covariance agrees with the bundle data with the mean absolute error, standard deviation, mean relative deviation, and mean absolute relative deviation being 0.00120, 0.0415, ?0.173%, and 1.80%, respectively. The correlation of relative velocity covariance agrees with the bundle data with the mean absolute error, standard deviation, mean relative deviation, and mean absolute relative deviation being ?0.00241, 0.0452, ?0.0316%, and 2.52%, respectively. In view of the great importance of void fraction covariance and relative velocity covariance on the one-dimensional interfacial drag force formulation, it is highly recommended to include the void fraction covariance and relative velocity covariance in the one-dimensional formulation of interfacial drag force used in nuclear thermal-hydraulic system analysis codes.     

Basic information on new regulatory criteria requiring on-site emergency preparedness for accelerator facilities in Japan

For basic information on new regulatory criteria, the dose rate around a thick target bombarded by proton, electron, or carbon beam having incident energy of 10 MeV–50 GeV (per nucleon in case of carbon) was simulated using the PHITS Monte Carlo code. Based on this simulation, the benchmark which is ‘1 Sv/h at 1 m away from the beam line’ assuming 1% beam loss was evaluated, and compared with the criteria in France and Canada. Based on this evaluation, a new regulatory criteria has been established for requiring on-site emergency preparedness for accelerator facilities in Japan, which is required for the ion accelerator beyond the ion beam of 100 MeV/nucleon and 0.5 kW beam power, and the electron accelerator beyond the electron beam of 50 MeV energy and 1 kW beam power.     

Code performance with improved two-group interfacial area concentration correlation for one-dimensional forced convective two-phase flow simulation

In gas–liquid two-phase flow simulation for reactor safety analysis, interfacial momentum transfer in two-fluid model plays an important role in predicting void fraction. Depending on flow conditions, a shape of the two-phase interface complicatedly evolves. One of the proposed approaches is to quantify the gas–liquid interface information using interfacial area transport equation. On the other hand, a more simplified and robust approach is to classify bubbles into two-groups based on their transport characteristics and utilize constitutive equations for interfacial area concentration for each group. In this paper, interfacial drag model based on the two-group interfacial area concentration correlations is implemented into system analysis code, and void fractions were calculated for the evaluation of numerical behaviors. The present analysis includes (1) comparison of one-group and two-group relative velocity models, (2) comparison with separate effect test database, (3) uncertainty evaluation of drag coefficient, (4) numerical stability assessment in flow regime transition, and (5) transient analysis for simulating the prototypic condition. Results showed that utilization of interfacial drag force term using constitutive equations of two-group interfacial area concentration yields satisfactory void fraction calculation results. The proposed solution technique is practical and advantageous in view of reducing the computational cost and simplifying the solution scheme.     

HNF1A Mutations and Beta Cell Dysfunction in Diabetes

Understanding the genetic factors of diabetes is essential for addressing the global increase in type 2 diabetes. HNF1A mutations cause a monogenic form of diabetes called maturity-onset diabetes of the young (MODY), and HNF1A single-nucleotide polymorphisms are associated with the development of type 2 diabetes. Numerous studies have been conducted, mainly using genetically modified mice, to explore the molecular basis for the development of diabetes caused by HNF1A mutations, and to reveal the roles of HNF1A in multiple organs, including insulin secretion from pancreatic beta cells, lipid metabolism and protein synthesis in the liver, and urinary glucose reabsorption in the kidneys. Recent studies using human stem cells that mimic MODY have provided new insights into beta cell dysfunction. In this article, we discuss the involvement of HNF1A in beta cell dysfunction by reviewing previous studies using genetically modified mice and recent findings in human stem cell-derived beta cells.     

Estimation of irradiance and outdoor performance of photovoltaic modules by meteorological data

Three environmental factors of irradiance, solar spectral distribution and module temperature greatly affect the performances of photovoltaic (PV) modules. If the environmental factors can be estimated by basic meteorological data (BMD) announced by an official organization in various areas, the performances of PV modules can be estimated easily. In this study, a relationship between the environmental factors and the BMD was analyzed. The performances of Si-based (crystalline Si and thin-film Si) PV modules were estimated by the relationship. As a result, errors between the estimation and actual performances in the crystalline Si and thin-film PV modules were within 1.88% and 0.58% in Kusatsu city, Japan (34°58′N, 135°57′E). This methodology can be useful for rating the performance of PV modules at various areas.     

Effect of gamma radiolysis on pit initiation of zircaloy-2 in water containing sea salt

In spent fuel pools at the Fukushima Daiichi Nuclear Power Station (1F), seawater was injected for cooling purposes after the tsunami disaster in March 2011. It is well known that the chloride in the seawater has the potential to cause localized corrosion (e.g., pitting corrosion) in metals. In this study, we evaluated the pitting potentials of zircaloy-2, the material used in the fuel cladding tubes in 1F, as a function of chloride concentration. To accomplish this, we used artificial seawater under gamma-ray irradiation and investigated the effect of radiolysis on pit initiation of zircaloy-2 in water containing sea salt. Changes in the composition of water containing sea salt were analyzed as well, both before and after gamma-ray irradiation. The characteristics of the resultant oxide films formed on zircaloy-2 were evaluated by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The experimental results showed that the pitting potential under irradiation was slightly higher than that under conditions in which no radiation was present, and that the pitting potential decreased with increasing chloride concentration in the presence as well as the absence of radiation. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by irradiation. The oxide film was composed of zirconium oxide and was made thicker during the irradiation. The higher pitting potential could thus be explained by the capacity of hydrogen peroxide to oxidize the surface and enhance oxide film formation. Under gamma-ray irradiation, the zircaloy-2 surface with an oxide film formed by radiolysis products was found to be resistant to pitting in the presence of chloride.     

Effect of Compressive Stress in Tumor Microenvironment on Malignant Tumor Spheroid Invasion Process

In this study, we proposed an in vitro tumor model to simulate the mechanical microenvironment and investigate the effect of compressive stress on the invasion process of malignant tumors. It has been pointed out that the biomechanical environment, as well as the biochemical environment, could affect the transformation of cancer cell migration, invasion, and metastasis. We hypothesized that the solid stress caused by the exclusion of surrounding tissue could transform tumor cells from noninvasive to invasive phenotypes. Colorectal cell spheroids were embedded and cultured in agarose gels of varying concentrations to simulate the earliest stages of tumor formation and invasion. The spheroids embedded in gels at higher concentrations showed peculiar growth after 72 h of culture, and the external compressive loading imposed on them caused peculiar growth even in the gels at lower concentrations. In conclusion, the mechanical microenvironment caused the transformation of tumor cell phenotypes, promoting the growth and invasion of tumor cell spheroids.