Dynamic observations of the fracture phenomena in alpha/beta brass two-phase bicrystals

In situ dynamic observations of the deformation and fracture characteristics of alpha/beta brass two-phase bicrystals were made by the solid diffusion method. The results indicated clearly that the crack initiation site was at the interface. The crack propagation direction, in both the alpha and beta phases, was found to be orientation dependent. Complementary experiments on alpha and beta brass single crystals confirmed the theories and results obtained previously on ductile single crystals.On leave from the Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.     

Resonance Effect on the Tunneling Reaction: H+H2→H2+H in Solid Hydrogen

The tunneling abstraction reaction: H+H₂H₂+H in -irradiated solid hydrogen has been studied using electron spin resonance (ESR) and electron-nuclear double resonance (ENDOR) spectroscopy and gas-chromatography. The rate constant for the tunneling reaction in solid hydrogen was found to decrease with the increase in the concentration of ortho-H₂ molecules in solid hydrogen. We concluded that the decrease in the rate constant is due to the energy level mismatching between reactant species of H+H₂ trapped and product species of H₂+H trapped in the reverse induced by inhomogeneous intermolecular interactions between ortho-H² molecules in solid hydrogen. This result indicates that resonance effects play an important role in tunneling reactions in solids.     

Novel vitamin E derivative with 4-substituted resorcinol moiety has both antioxidant and tyrosinase inhibitory properties

A novel vitamin E derivative, (6″-hydroxy-2″,5″,7″,8″-tetramethylchroman-2″-yl) methyl 3-(2′,4′-dihydroxyphenyl)propionate (TM4R), which has a chromanoxyl ring and 4-substituted resorcinol moieties, was synthesized; and its inhibitory effects on tyrosinase, antioxidant ability, and lightening effect of ultraviolet B (UVB)-induced hyperpigmentation were estimated. TM4R showed potent inhibitory activity on tyrosinase, which is the rate-limiting enzyme in melanogenesis. The scavenging activities of TM4R on 1,1-diphenyl-2-picrylhydrazyl and hydroxyl radicals were found to be nearly the same as those of α-tocopherol. Furthermore, an efficient lightening effect was observed following topical application of TM4R to UVB-stimulated hyperpigmented dorsal skin of brownish guinea pigs. These results suggest that TM4R may be a candidate for an efficient whitening agent, possibly by inhibiting tyrosinase activity and biological reactions caused by reactive oxygen species.     

A new algorithm for packet routing problems using chaotic neurodynamics and its surrogate analysis

We propose a new algorithm for routing packets which effectively avoids packet congestion in computer networks. The algorithm involves chaotic neurodynamics. To realize effective packet routing, we first composed a basic method by a neural network, which routes packets with shortest path information between two nodes in the computer network. When the computer network has an irregular topology, the basic routing method does not work well, because most of packets cannot be transmitted to their destinations due to packet congestion in the computer network. To avoid such an undesirable problem, we employed chaotic neurodynamics to extend the basic method. Numerical experiments show that our proposed method exhibits good performance for scale-free networks. We also analyze why the proposed routing method is effective, comparing the proposed method with several stochastic methods. We introduced the method of surrogate data, a statistical hypothesis testing which is often used in the field of nonlinear time-series analysis. Analysis of the proposed method by the method of surrogate data reveals that the chaotic neurodynamics is most effective to decentralize the packet congestion in the computer network.     

Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets

The removal of paint on the surface of waste plastics is difficult by the conventional process; in this research, a new cleaning mechanism using atmospheric plasmas was examined through optical emission spectroscopy, electron spectroscopy for chemical analysis, and scanning electron microscopy. Results indicate that an increase of pulse frequency enables for a short processing time for the removal of the paint film, signifying that the production of radicals in plasma, especially oxygen radicals, can be controlled by pulse frequency.Plasma jets were generated under the experimental conditions of an input power of 250 W to 400 W, a pulse frequency of 2 kHz to 12 kHz, and a plasma gas flow rate of 30 L/min. Examination of the intensity ratio of the reactive species, as measured by emission spectroscopy, showed that the O/N value increased with an increase in pulse frequency. Results of analysis with electron spectroscopy for chemical analysis show that nitrogen atoms and molybdenum in only the paint film decreased through plasma processing.     

Role of plasticity on interface crack initiation from a free edge and propagation in a nano-component

In order to elucidate the role of plasticity on interface crack initiation from a free edge and crack propagation in a nano-component, delamination experiments were conducted by a proposed nano-cantilever bend method using a specimen consisting of ductile Cu and brittle Si and by a modified four-point bend method. The stress fields along the Cu/Si interface at the critical loads of crack initiation and crack propagation were analyzed by the finite element method. The results reveal that intensified elastic stresses in the vicinity of the interface edge and the crack tip are very different, although the Cu/Si interface is identical in both experiments. The plasticity of Cu was then estimated on the basis of the nano-cantilever deflection measured by in situ transmission electron microscopy. The plasticity affects the stress fields; the normal stress near the interface edge is intensified while that near the crack tip is much reduced. Both the elasto-plastic stresses are close to each other in the region of about 10 nm. This suggests that the local interface fracture, namely, the crack initiation at the interface edge and the crack propagation along the interface, is governed by elasto-plastic normal stress on the order of 10 nm.     

Fast and selective cell isolation from blood sample by microfiber fabric system with vacuum aspiration

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.     

An analytical study of the effect of a support geometry on frequency shift and support loss of piezoelectric ring-shaped resonators for healthcare and environmental applications

Ring-shaped resonators with one support have been designed in this work. The ring-shaped resonator reacts with a mass perturbation to provide eigenstate or frequency shifts which could transfer to electrical signals by piezoelectric effect. The aforementioned ring-shaped resonator is mainly comprised with a multilayer of Pt/Ti/PZT/Pt/Ti/SiO₂ deposited on the silicon-on-insulator wafer and expected to be a contour mode. In order to estimate the sensitivity of the ring-shaped resonator against the mass perturbation, the theoretical analysis was conducted by ANSYS from two aspects including: (a) the effect of support geometry on frequency shift and support loss (from view point of vibration mode shape); and (b) the mass application methodology. It is found that low-amplitude vibration area is smaller at narrow support, and frequency shift of trapezoid support is higher than that of rectangle support.     

Using bottom surface reflectance to map coastal marine areas: a new application method for Lyzenga's model

Remote sensing is widely used in coastal management. Lyzenga's model has been traditionally used to explain the relationship between bottom surface reflectance and the radiance level measured by satellite. Due to its central assumption, this model lacks accuracy compared with the other radiative transfer models. Nonetheless, it enables, with a single and simple equation, representation of the multiple optical processes taking place in coastal areas. Mapping processes associated with this model may include radiometric correction, a technique previously pointed out as a major driver of mapping accuracy. Radiometric correction is generally based on a depth-invariant index, efficient for clear waters (Jerlov water type I to II) but largely unsuitable when transparency decreases (Jerlov water type II to III). In order to overcome this problem, we developed a new index for radiometric correction, which combines bathymetry data with attenuation coefficients. The improved efficiency of our model with regard to the traditional depth invariant index was demonstrated through two case studies: Funakoshi Bay (Japan; Jerlov water type II) and the Gabes Gulf part located off Mahares (Tunisia; Jerlov water type II to III).     

Temperature measurement at flip chip solder joint during electromigration test

Measuring the real temperature of a flip chip solder joint during an electromigration test has been a problem because of its small size and the local Joule heating due to a large applied current. A unique method that employs the electrical resistance change in the junction line between two solder joints was introduced to determine the temperature of the solder joint. The change in resistance was converted into temperature using a thermal coefficient of resistance of the junction line. The method accurately measured temperatures of the solder joint within 2 K until the solder joint resistance change ratio reached 100% due to growth of an electromigration void.