Thermosetting bismaleimide resins generating covalent and multiple hydrogen bonds

Prepolymerizations of 4,4′‐bismaleimidodiphenylmethane (BMI), diallyl isocyanurate (DAIC), and melamine (ML) at 160–170°C and subsequent compression molding at 200–280°C yielded cured BMI/DAIC/ML resins with feed molar ratios of 4/1/1, 3/1/1, and 2/1/1 (BMI‐DAIC‐ML411, 311, and 211). Similarly, cured BMI/DAIC 1/1 and BMI/ML 3/1 resins (BMI‐DAIC11 and BMI‐ML31) were prepared. The FT‐IR analysis revealed that the maleimide and allyl groups were almost consumed for all the cured resins, and the hydrogen bonding interaction became stronger with decreasing BMI contents for BMI‐DAIC‐MLs. Based on the cured structures elucidated from the FT‐IR result, the numbers of multiple hydrogen bonds and cross‐linking covalent bonds (N_MHB and N_CB), and total cross‐linking bond energy (E_TB) were evaluated to be 0, 7.92, and 618 for BMI‐DAIC‐ML411, 0.71, 7.81, and 627 for BMI‐DAIC‐ML311, and 0.95 mol kg^?1, 7.61 mol kg^?1, and 617 kcal kg^?1 for BMI‐DAIC‐ML211, respectively. A higher order of glass transition and 5% weight loss temperatures for BMI‐DAIC‐MLs was 411 > 311 > 211 in accordance with a higher order of N_CB. BMI‐DAIC‐MLs displayed a weak tan δ peak at 70–150°C due to dissociation of the hydrogen bonds. The flexural strength and modulus of BMI‐DAIC‐ML311 were higher than those of BMI‐DAIC‐ML411 in accordance with the difference of E_TB. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43121.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Surface Analysis of Cr2O3‐, CoO‐, and Al2O3‐Doped Iron–Phosphate Glasses at High Temperature

Surface structures of iron–phosphate glasses were examined using X‐ray photoelectron spectroscopy (XPS). Cr₂O₃, CoO, and Al₂O₃ were introduced to the glass by the replacement of a part of Fe₂O₃, and the simulated fission products are also added. The obtained glasses showed high chemical durabilities by MCC‐1 test. In situ high‐temperature and room‐temperature XPS measurements were conducted on the polished sample surfaces and also those after 1‐week chemical durability test. Unique trends were observed in XPS spectra on heating and after the chemical durability test, respectively. Nature of the glass surface of iron–phosphate glasses was explained from the point of view of surface energy, and the origin of high chemical durability and the effect of chromium ions were discussed based on the changes on surface composition and valence states of transition‐metal ions.     

Polypropylene plasticization and photodegradation with a TiO2/poly(ethylene oxide)/methyl linoleate paint photocatalyst system

The photodegradation of polypropylene (PP) film was performed by a TiO₂/polyethylene oxide (PEO)/plant oil paint photocatalyst system. The photodegradation underwent two stages of development as follows: Initially PP reacted with linoleic acid radical originated from the photoreaction of plant oil component. Second, the linoleic acid graft‐polymer was decomposed, and then PP chain scission was caused. The process was studied using methyl linoleate (ML) in detail. The melting point of the 24 h‐photodegraded PP slightly decreased, and those of the 48 h‐ and 96 h‐ones drastically did as compared with the pristine PP. The crystallinity (χ_c) decreased at the 48 h photodegradation time and drastically increased at the 96 h one. The 24 h‐photodegraded PP showed the 77% Young's modulus, 88% tensile strength, and 103% strain at break values to those of the pristine PP. The ML graft‐polymerization and decomposition brought about the PP plasticizing and chemi‐crystallization, causing the PP degradation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39909.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Bactericidal effect of cationic hydrogels prepared from hydrophilic polymers

This study investigated whether hydrogels comprising hydrophilic cationic polymers have similar bactericidal effects. Bacteria were seeded on hydrogels and agar and their viability was assessed with time. Cationic hydrogels displayed bactericidal effects upon long-term bacterial contact. Furthermore, we assessed the areal density of cationic monomer unit of the cationic hydrogels, water content, and the initial elastic modulus. We examined correlations between each factor and bacterial death ratios; consequently, the bacterial death ratios were strongly correlated with the areal density of cationic hydrogel monomers. Elastic energy (W_el) generated at the cytomembrane ion-binding region and the cationic hydrogel and the cytomembrane interfacial energy (W_f) were estimated; consequently, W_el exceeded W_f at higher contact areas. The cationic hydrogel may extract cytomembranes with a reasonable adsorption area. Therefore, cationic hydrogels may be used as probes for ultrasonic echo to sterilize medical equipment.     

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Development of a homogeneous competitive immunoassay for phosphorylated protein antigen based on the enhanced fluorescence resonance energy transfer technology

We describe a homogeneous competitive immunoassay for a phosphorylated protein antigen. The assay takes advantage of the enhanced fluorescence resonance energy transfer (FRET) technology, which has a unique characteristic that the FRET signal is increased by the specific interaction of two fluorolabeled leucine zippers. We chose extracellular signal-regulated kinase (ERK) as a model antigen and constructed two molecular probes in which either anti-phosphorylation site antibody or the antigen peptide was chemically conjugated to the enhanced FRET probes. While these molecular probes indicated sufficient FRET signal without antigen, they displayed a significant change in the fluorescent spectrum by mixing with phosphorylated antigens. With this competitive enhanced FRET immunoassay, a phosphorylated ERK concentration within the range from 15 nM to 250 nM could be determined. Because the assay is very simple, it would be applied to not only in vitro assay but also in vivo detection of protein phosphorylation.     

Sulfide oxidation by gene expressions of sulfide-quinone oxidoreductase and ubiquinone-8 biosynthase in Escherichia coli

Sulfides (S2),SH-) such as hydrogen sulfide belong to a class of sulfur compounds with unpleasant odors. In order to confer sulfide-oxidizing ability on the intestine-inhabiting bacteria, the sulfide-quinone oxidoreductase gene (sqr) in Rhodobacter capsulatus DSM-155 and genes for quinone biosynthesis (ubiC, ubiA and ispB) in Escherichia coli XL1 Blue-MRF' were transduced into E. coli BL21(DE3). Plasmids pT7-7 and pSTV were used as vectors of sqr, and ubiCA and ispB, respectively. The recombinants sqr-BL21(DE3) and ubiCA,ispB-sqr-BL21(DE3) were successfully constructed. The maximal sulfide-removing activities of the whole cells and membrane fractions of sqr-BL21(DE3) attained at pH 8.0 and 7.8, were 267 nmol/mg cells (dry weight)/min and 1250 nmol/mg membrane fraction (protein)/min, respectively. The molecular ratio of sulfide (S2-) oxidized and oxygen (O2) consumed was 2:1. SQR activity in the recombinant cells was positively restricted under anaerobic conditions and also by the addition of electron transfer inhibitors. Ubiquinone-8 (UQ-8) biosynthesis in the cells of ubiCA,ispB-sqr-BL21(DE3) increased as much as 2.2-fold compared with that of (pSTV)-sqr-BL21(DE3) during the 12-16 h incubation period. The maximal sulfide removal in the quinone-raised E. coli was attained slightly earlier, however, SQR activities thereafter were lower than those in (pSTV)-sqr-BL21(DE3).