A model for the complex permittivity of water at frequencies below 1 THz

Experimental permittivity data of liquid water, compiled from the open literature, were selectively applied to support a modeling strategy. Frequencies up to 1 THz and atmospheric temperatures are covered with an expression made up by two relaxation (Debye) terms. The double-Debye model reduces to one term when the high frequency limit is set at 100 GHz, and the model can be extended to 30 THz by adding two resonance (Lorentzian) terms. The scheme was carried out by employing nonlinear least-squares fitting routines to data we considered reliable.     

Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.     

Conceptual design of rain radar for the tropical rainfall measuring mission

Specifications for a spaceborne rain radar for tropical rainfall measurement are described. A spaceborne rain radar has problems peculiar to rain observation from space. The radar must have a fast scanning mechanism to cover a large swath. Very weak rain echoes compared to the sea or land surface signal must be detected. These capabilities must be attained under the severe power consumption and mass limitations of the satellite bus. The fast scanning requirement forces application of an electrically scanning mechanism. This requirement also causes a severe limitation of the available number of independent samples. The requirement for weak rain echoes excludes application of the pulse compression technique, which is a very conventional technique for other active microwave sensors on board satellites. Under these constraints, a rain radar with an electrically scanning planar antenna at 13-8 GHz is proposed.     

Mechanisms of reduction in hole concentration in Al-doped 4H-SiC by electron irradiation

From the temperature dependence of the hole concentration in unirradiated lightly Al-doped 4H-SiC epilayers, an Al acceptor with E_V + 0.2 eV, which is an Al atom (Al_Si) at a Si sublattice site, and an unknown deep acceptor with E_V + 0.35 eV are found, where E_V is the top of the valence band. Both the densities are similar. With irradiation of 0.2 MeV electrons the Al acceptor density is reduced, while the unknown deep acceptor density is increased. Judging from the minimum electron energy required to displace a substitutional C atom (C_s) or the Al_Si, the bond between the Al_Si and its nearest neighbor C_s is broken due to the displacement of the C_s by this irradiation. Moreover, the displacement of the C_s results in the creation of a complex (Al_Si-V_C) of Al_Si and a carbon vacancy (V_C), indicating that the possible origin of the deep acceptor with E_V + 0.35 eV is Al_Si-V_C.     

Nanowrinkled and Nanoporous Polyethylene Membranes Via Entanglement Arrangement Control

Crystalline homopolymers, including polyethylene (PE), which has the simplest architecture, form a nanometer‐sized combination of crystalline and amorphous components, but their arrangement control, similar to self‐assembled phase‐separation of block‐copolymers, is usually difficult. However, molecular entanglements trapped between crystalline and amorphous components of homopolymers coincide with the segmental linking points on the interfaces of the microphase separation for block copolymers. Nanowrinkled PE membranes are prepared with a network of 30 nm‐thick homogeneous lamellae using a novel entanglement control technique composed of biaxial melt‐drawing and melt‐shrinking procedures, which are limited for highly entangled ultrahigh molecular weight materials. Such a network arrangement of nanowrinkling lamellae spreading on membrane surface and also across the membrane thickness improves the mechanical properties of both tensile strength and tearing strength. Subsequent cold‐drawing causes delamination of the lamellar interfaces, leading to the resultant nanoporous morphology composed of passing‐through channels that are several tens of nanometers in diameter, without any solvent processing.     

Multi-layer floorplanning for stacked ICs: Configuration number and fixed-outline constraints

3-D (stacked device layers) ICs can significantly alleviate the interconnect problem coming with the decreasing feature size and is promising for heterogeneous integration. In this paper, we concentrate on the configuration number and fixed-outline constraints in the floorplanning for 3-D ICs. Extended sequence pair, named partitioned sequence pair (in short, P-SP), is used to represent 3-D IC floorplans. We prove that the number of configuration of 3-D IC floorplans represented by P-SP is less than that of planar floorplans represented by sequence pair (SP) and decreases as the device layer number increases. Moreover, we applied the technique of block position enumeration, which have been successfully used in planar fixed-outline floorplanning, to fixed-outline multi-layer floorplanning. The experimental results demonstrate the efficiency and effectiveness of the proposed method.     

Photovoltaic display module in a mobile GPS

We have developed a mobile global positioning system (GPS) that operates on just photovoltaic (PV) cells. The system receives wireless signals from satellites and shows one's present location accurately on a map without the need for a battery. A PV display module, which combines a transparent LCD with a-Si PV cells and has a power generation function, is added to ordinary PV cells to increase the total amount of power generated. The PV display module enables 40% more power generation than a system without the module.     

Spatial correlation coefficients of rainfall intensity inferred from statistics of rainfall intensity and rain attenuation

On the basis of the reliable statistics of rainfall rate and rainfall attenuation for 8 localities in Europe, the spatial correlation coefficient of point rainfall intensity was inferred for each locality from the cumulative distributions of attenuation and rainfall intensity by inversely applying the modified Morita and Higuti rainfall attenuation prediction method. It was found that for European regions the spatial correlation coefficient with an exponential dependence on the horizontal distance is more appropriate for the prediction of rainfall attenuation than that proposed by Morita and Higuti for the Japanese climate. It was also found that although the spatial correlation characteristic varies significantly from one locality to another its variance is not so significant within a particular ccir rainfall climatic zone. This suggests that in predicting the rainfall attenuation it is desirable to employ the spatial correlation coefficient appropriate for the locality to be estimated.     

Characteristics of ions impacting grid surfaces in an ion engine

Numerical evaluations of grid erosions in ion engines are required to estimate the lifetimes of long-term space missions. In this study, to investigate the characteristics of ions colliding with neutrals and impacting the accel grid surface, including ions that collide with neutrals more than once, three-dimensional particle analyses using a full-PIC (Particle in Cell) code were performed. The distributions of erosion by charge-exchanged ions show periodic patterns. The multiple-collided ion constitutes 7 and 8% of the accel grid current to the inner and downstream surfaces, respectively. The energy of the multiple-collided ion impacting the downstream surface has a broader distribution than that of the charge-exchanged ion. These results suggest the importance of investigating multiple-collided ions in high-accuracy quantitative evaluations of grid erosion.