RAFT‐mediated graft polymerization of glycidyl methacrylate in emulsion from polyethylene/polypropylene initiated with γ‐radiation

The successful reversible addition‐fragmentation (RAFT)‐mediated graft polymerization of glycidyl methacrylate (GMA) in emulsion phase from polyethylene/polypropylene nonwoven fabric using 4‐cyano‐4‐[(phenylcarbonothioyl)thio]pentanoic acid under γ‐irradiation at ambient condition is reported. While conventional graft polymerization in emulsion phase yielded grafted materials with low of grafting (Dg) values [<7.5% at 10% (wt/wt) GMA], addition of RAFT agent to the graft polymerization system allowed the synthesis of polyethylene/polypropylene‐g‐poly(GMA) with more tunable Dg (8% ≤ Dg ≤ 94%) by controlling the grafting parameters. Relatively good control (PDI ～1.2 for selected grafting conditions) during polymerization was attained at 100:1 monomer‐to‐RAFT agent molar ratio. The number average molecular weight of free poly(glycidyl methacrylate) (PGMA) increased as a function of monomer conversion. NMR analyses of the free PGMA homopolymers indicate the presence of dithiobenzoate group from 4‐cyano‐4‐((phenylcarbonothioyl)thio) pentanoic acid on the polymer chain. The reactive pendant oxirane group of the grafted GMA can be modified for various environmental and industrial applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45270.     

Pilot-Scale Operation of a Concrete Sludge Recycling Plant and Simultaneous Production of Calcium Carbonate

A pilot-scale plant to treat concrete sludge and produce calcium carbonate (CaCO₃) and an environmental purification agent (phosphorus adsorbent derived from concrete sludge, PAdeCS®) was designed, constructed, and operated. Concrete sludge from a concrete pile and pole production plant, boiler gas containing CO₂, and groundwater were used in the plant. The process involved calcium extraction from concrete sludge into water, followed by reaction of the calcium with CO₂ to produce crystalline CaCO₃. The pilot-scale plant was operated for 1 week, and the mass flows, conversion of CO₂ to CaCO₃, and net CO₂ emissions of the process were estimated. High-purity CaCO₃ (>97%) suitable for industrial use was obtained. Based on the power consumption of the process and the amount of CO₂ sequestered into CaCO₃, a net reduction in CO₂ emissions can be achieved using this process. The produced PAdeCS can be used as an inexpensive substitute for calcium series environmental purification agents.     

Effect of support layer on gas permeation properties of composite polymeric membranes

PES/Pebax and PEI/Pebax composite membranes were prepared by coating the porous PES and PEI substrate membranes with Pebax-1657. The morphology and performance of the prepared membranes were investigated by SEM and CO₂ and CH₄ permeation tests. The CO₂ permeances of 28 and 52 GPU were achieved for PES/Pebax and PEI/Pebax composite membranes, respectively, with CO₂/CH₄ selectivities almost equal to that of Pebax (26). The experimental data were further subjected to a theoretical analysis using the resistance model. It was found that the porosity and the thickness of the dense section of PES substrate were an order of magnitude higher than those of PEI substitute. The porosity/thickness ratio of PEI substrate was, however, higher than PES, explaining the higher permeance of PEI/Pebax composite membrane. Substrates with porosities much higher than the Henis-Tripodi gas separation membrane were used in this work, aiming to achieve the selectivity of Pebax, rather than those of the substrate membrane materials.     

Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3–Lu2O3 mixed additive

Microstructure and mechanical property of silicon nitride (Si₃N₄) ceramic are strongly dependent on the selection of sintering additives. When rare‐earth (RE) oxide is used as the sintering additive, segregation of RE ions at interface between Si₃N₄ grain and intergranular glassy film (IGF) is believed to play a critical role. Although the ionic radius of RE ion is known to be an empirical parameter to modify the mechanical property, the correlation between the segregated ions and their ionic radii is still under controversy. In order to address this issue, (i) rate of α‐β phase transformation and (ii) segregation behavior at the interface were studied for Si₃N₄ ceramics sintered using mixture of La₂O₃ and Lu₂O₃ as additives in this study. Specimens of Lu content 30% and higher exhibited lower activation energies for the α‐β phase transformation as compared with those of Lu content 20% and lower. In terms of the segregation behavior, La was preferably segregated at one site and Lu at the other site along β‐Si₃N₄/IGF interface in the specimens of Lu content 30% and higher. It is understood from these results that Lu segregation site should be more closely related with grain growth.     

Hydrolysis of polyurea under high pressure of carbon dioxide

A chemical decomposition of polyurea (PUA) by hydrolysis under high pressure of carbon dioxide (CO₂) was proposed. The hydrolysis of PUA was carried out at 190 °C for 2 h under 7.0 MPa of CO₂ in the presence of water. The hydrolysis reaction gave white residual solid and water soluble compound. The white residual solid was characterized to be degraded PUA by FT-IR spectrum and elemental analysis. ¹H-NMR spectra of the water soluble compound revealed that the hydrolysis of PUA produced diamine only from repeating unit of PUA, which was a component of PUA. This hydrolysis gave the corresponding diamine for quantitative yields.     

Reversible capture and release of carbon dioxide by binary system of polyamidine and polyethylene glycol

CO₂ absorbents were prepared from polyethylene glycol and the polyamidines having N,N′-disubstituted amidine structure in the main chain synthesized through acid-catalyzed melt polycondensation of orthoesters and α,ω-diamines. The homogeneous binary mixtures with the polyamidines captured CO₂ much more efficiently under CO₂ flow than the one with polyethyleneimine. Furthermore, we investigated the CO₂ capture and release by the binary mixtures in terms of effects of the volatility and the structure of polyamidines, temperature, and polyethylene glycol. Taking into consideration the results thus obtained, we conducted CO₂ capture/release cycles with the CO₂ capture step at 40 °C and with the CO₂ releasing step at 80 °C in an alternating manner, thereby demonstrating the repeatability of CO₂ capture and release by the binary system of the polyamidine and polyethylene glycol.     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

ADDUCT FORMATION OF β-DIKETONATO LANTHANOIDS(III) WITH CARBOXYLIC ACIDS HAVING HYDROXYL AND METHOXYL GROUPS

Adduct formation of 2-thenoyltrifluoroacetonato(tta) lantha-num(III), europium(III), and ytterbium(I II) with α-pheny 1 1 actic, α-methoxy phenyl acetic, salicylic, and o-methoxy benzoic acids in chloroform has been studied by solvent extraction technique. It has been found that 1anthanoid(111) chelates form more stable adducts with these carboxylic acids in the sequence: Yb(tta)₃ < Eu(tta) ₃ < La(tta) ₃. The adduct formation constants as well as the separation factors obtained as the ratio of the constants between a pair of metals are the largest for α-phenyl lactic acid among these acids. The characteristics with α-phenyl 1actic acid would be caused by the action as bidentate unlike benzoic acid derivatives which work as monodentates owing to the internal complexa-tion through hydrogen bonding.     

Chemical modification of polynorbornene: transformation of ester moiety containing polynorbornene to carboxylic acid structure

Polynorbornene (PNB) having methyl ester in side chain was partially hydrolyzed under alkaline condition in mixed organic solvents containing tetramethylammonium hydroxide as a base. Through hydrolysis of methyl ester group in PNB under basic condition, PNB having carboxylic acid can be obtained and degree of hydrolysis (DH) were evaluated by ¹H NMR measurement from 0.1 to 0.8, depending upon reaction conditions such as reaction time, solvent, and amount of base. The resulting hydrolyzed PNB were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, and size exclusion chromatography. No remarkable decreasing of molecular weight was observed and chain scission does not occur during the hydrolysis of PNB in the reaction condition examined here. The glass transition temperature of hydrolyzed PNB increased with increase in DH which can be attributed to the existence of intermacromolecular association of carboxylic acid in hydrolyzed PNB. Esterification of PNB having carboxylic acid was also carried out by using alkyl halide and DBU.