A continuum damage mechanics model using FEM calculations was proposed to be applied to an analysis of the fuel failure due to pellet cladding mechanical interaction (PCMI) under reactivity-initiated accident conditions. The model expressed ductile fracture via two processes: damage nucleation related to void nucleation and damage evolution related to void growth and linkage. The boundary conditions for the simulations were input from the fuel performance codes FEMAXI-7 and RANNS. The simulation made reasonable predictions for the cladding hoop strain at failure and reproduced the typical fracture behavior of the fuel cladding under the PCMI loading, characterized by a ductile shear zone in the inner region of the cladding wall. It was shown that occurrence of a through-wall crack is determined at an early stage of crack propagation, and the rest of the through-wall penetration process is achieved with a negligible increment in strain. The effect of a local temperature rise in the cladding inner region on the failure strain was found to be less than 5% for the conditions investigated. Failure strains predicted under a plane strain loading were smaller by 20%–30% than those predicted under equibiaxial tensions between the hoop and the axial directions. 相似文献
Instrumentation and monitoring systems in a nuclear power plant are very important to monitor plant conditions for safe operations and a plant shutdown. The severe accident at TOKYO ELECTRIC POWER COMPANY's Fukushima Daiichi Nuclear Power Station (hereinafter called as TF1) in March 2011 caused several severe situations such as core damage, hydrogen explosion, etc. Lessons learned from the severe accident at TF1 show that an appropriate operable instrumentation and monitoring system for a severe accident should be developed so that the system will deliver an appropriate performance for mitigation of severe accident condition in a nuclear power plant.
This paper proposes the classification method of severe accident condition for the development of an appropriate operable instrumentation and monitoring system for a severe accident based on the problem analysis of monitoring variables during the severe accident at TF1. The classification is formed on the basis of the integrity of boundary for plant safety and the successful (or unsuccessful) condition of the cooling water injection, and is used for an establishment of defining severe accident environmental conditions for the instrumentation and monitoring system. Examples of the establishment method are also shown in this paper. 相似文献
The chiral indan derivative (S)-2 (2-[(8S)-1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl]ethyl-amine) was synthesized by enzyme-catalyzed asymmetric hydrolysis of the racemic acetamide 1 (N-[2-(1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl)ethyl]acetamide). The reaction was carried out using Bacillus sp. SUI-12 screened for the ability to hydrolyze 1 to give (S)-2 with high enantioselectivity. In a scaled-up experiment, a low reaction rate was observed. However, by changing the culture medium and the reaction conditions, it became possible to run the reaction to 40% conversion on a 10-g or more scale, obtaining (S)-2 at >;99% enantiomeric excess (ee). The (S)-2 obtained was available for the synthesis of the melatonin receptor agonist TAK-375 (N-[2-[(8S)-1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide). 相似文献
The objective of this research work is to clarify essential factors related to degradation of PEFC electrodes. The degradation of Pt catalysts and the carbon support after a daily start and stop (DSS) operation was evaluated separately by measuring the electrochemical active area (SPt) and the double layer charging current (IDL) with cyclic voltammetry without and with CO adsorption on Pt catalyst surfaces, respectively. Corrosion of the carbon support was accelerated mainly by raising the operating potential to 0.90 V, which was observed by increase in IDL. The high-temperature operation at 90 °C or high-potential operation at 0.90 V resulted in a dramatic decrease in SPt. In contrast, it was found that the apparent cell performance was not so degraded probably because the decrease in SPt was cancelled by an increase in the proton conductance in the swollen ionomer. The agglomeration of Pt catalyst particles and their migration in the electrolyte membrane were also analyzed by TEM observation after the DSS operations. 相似文献
The influence of the turbulence of reactant on the radiation-induced polymerization of ethylene in 40 mole-% Freon-114 (C2Cl2F4) was studied using a tubular reactor at 400 kg/cm2 and 25°C with a dose rate of 1.3 × 105 rad/hr. At constant linear velocity and tube diameter, the polymer concentration was shown to increase linearly with the reactor tube length. This indicates that the polymerization is in a stationary state. By changing the linear velocity from 3.5 to 42.7 cm/sec and the tube diameter from 5 to 14 mm, the space time yield and the molecular weight of polymer were found to vary between 0.21 and 0.46 mole ethylene/1.-hr and from 5.0×103 to 10.5×103, respectively. The space time yield and molecular weight decreased sharply to about one half those in the static polymerization with increasing fluid turbulence and then slowly increased in the highly turbulent state. Similar effects were observed in a tank reactor when the stirring speed was changed. 相似文献
The hexane-soluble fractions of hydroliquefied products from three Yallourn brown coal lithotypes have been separated into five fractions by combined silica-alumina packed column chromatography. Analyses of various fractions by g.c.-m.s. permitted the identification of ≈50 components in the saturate fraction and 40 components in the diaromatic fraction, together with 30 components in the monoaromatics. The components identified were quite similar among hexane-soluble portions of all three lithotypes. A marked predominance of even carbon number alkane (C23-C29) was observed in the hydrocarbon fractions from pale lithotype over , and medium light lithotype over both pure ZnCl2 and . However, medium dark lithotype over both melt catalysts produced a saturate fraction with an odd carbon number(C22-C28) preference. Based on spectral methods, Soxhlet extracts obtained from untreated lithotypes (hexane and benzene solubles) were characterized as complex mixtures of higher molecular weight(300–1000) aliphatic hydrocarbons, which were supposed to be a precursor of the saturates produced from the corresponding lithotype in the catalytic hydroliquefaction. 相似文献