Enhanced Development of Azoxymethane-Induced Colonic Preneoplastic Lesions in Hypertensive Rats

Metabolic syndrome is associated with an increased risk of colorectal cancer. This study investigated the impact of hypertension, a component of metabolic syndrome, on azoxymethane (AOM)-induced colorectal carcinogenesis using SHRSP/Izm (SHRSP) non-diabetic/hypertensive rats and SHRSP.Z-Lepr^fa/IzmDmcr (SHRSP-ZF) diabetic/hypertensive rats. Male 6-week-old SHRSP, SHRSP-ZF, and control non-diabetic/normotensive Wister Kyoto/Izm (WKY) rats were given 2 weekly intraperitoneal injections of AOM (20 mg/kg body weight). Two weeks after the last injection of AOM, the SHRSP and SHRSP-ZF rats became hypertensive compared to the control WKY rats. Serum levels of angiotensin-II, the active product of the renin-angiotensin system, were elevated in both SHRSP and SHRSP-ZF rats, but only the SHRSP-ZF rats developed insulin resistance, dyslipidemia, and hyperleptinemia and exhibited an increase in adipose tissue. The development of AOM-induced colonic preneoplastic lesions and aberrant crypts foci, was significantly accelerated in both SHRSP and SHRSP-ZF hypertensive rats, compared to WKY normotensive rats. Furthermore, induction of oxidative stress and exacerbation of inflammation were observed in the colonic mucosa and systemically in SHRSP and SHRSP-ZF rats. Our findings suggest that hypertension plays a role in the early stage of colorectal carcinogenesis by inducing oxidative stress and chronic inflammation, which might be associated with activation of the renin-angiotensin system.     

Gas transport in poly(vinyl-p-isopropylbenzoate): Comparison and correlation with some other poly(vinyl esters)

Gas permeability in poly(vinyl-p-isopropylbenzoate) (PVp-i-PrB) was determined by a timelag method. The transport properties were discussed from comparison with the permeability data of other poly(vinyl esters), which were studied previously. All these polymers are structurally related, and the size of a side group or the position of its substituent was changed systematically. The isopropyl group of PVp-i-PrB is attached at the para position of a phenyl ring and is the largest in size. As a result gas diffusivity and therefore permeability were increased. The effect of the substituent on gas diffusivity was explained as it increases the interchain and intrachain distances. The discussion was supported from the comparison of the density data between PVp-i-PrB and other poly(vinyl esters). The diffusion coefficients of six glassy poly(vinyl esters) were correlated at their T_g and good correlations were shown to the free volume and its fraction. On the other hand, gas solubility was little affected by the change of an alkyl group on a phenyl ring. The solubility data of PVp-i-PrB and poly(vinyl benzoate) were shown to be clearly correlated with the critical properties of the penetrants. © 1995 John Wiley & Sons, Inc.     

Experiments and simulations of uniaxial ratchetting deformation of Sn–3Ag–0.5Cu and Sn–37Pb solder alloys

This paper discusses uniaxial ratchetting deformation of lead-free solder alloy Sn–3Ag–0.5Cu and lead-containing solder alloy Sn–37Pb, which were subjected to tension–compression loading with several stress amplitudes and stress ratios, minimum stress over maximum stress. First the uniaxial ratchetting tests were conducted with three maximum stresses and four stress ratios. All tests were conducted using cylindrical bulk specimens of the solder alloys at 313 K. The test results show that there are differences in the ratchetting deformation behavior of the two solder alloys; the larger ratchetting strain occurs in the lead-containing solder alloy than in the lead-free solder alloy. The ratchetting deformation was simulated by the dislocation based constitutive model proposed by Estrin et al. (J Eng Mater Technol 118:441, 1996). The evolution equation of the back stress employed in the constitutive model was modified considering a dynamic recovery term. The effect of the modification of the back stress evolution is discussed by comparing the simulations with the corresponding experimental results. The simulations suggest that the recovery term in the kinematic hardening rule plays an important role in fitting the simulation to the experimental results of the ratchetting deformation of the solder alloys.     

东丽的环境挑战及新材料

东丽以"Innovation by Chemistry"为核心,通过融合有机化学、高分子科学、生物化学、纳米技术等进行技术革新,挑战具有创新意义的新素材及新技术,为全球用户创造新的价值,致力于改善地球环境,技术创新开发。东丽纤维研究所(中国)有限公司成立于2002年5月,与日本东丽株式会社共同致力于中国的纤维及高分子材料的研究。设有南通总公司和上海分公司,本次就公司的研究开发概要作报告。着重报告东丽(株)正在推进的环境友好型新材料研究开发状况。包括生物基聚合物聚乳酸、PTT、生物尼龙等相关的技术概要及特征。另外介绍一下具有环境保护技术的绿色工艺的纤维素纤维。     

Development of partial-charge potential for GaN

Partial-charged potentials for GaN are systematically developed that describe a wide range of structural properties, where the reference data for fitting the potential parameters are taken from ab initial calculations or experiments. The present potential model provides a good fit to different structural geometries and high pressure phases of GaN. The high-pressure transition from wurtzite to rock-salt structure is correctly predicted yielding the phase transition pressure of about 55 GPa, and the calculated volume change at the transition is in good agreement with experimental data. The results are compared with those obtained by ab initio simulations.     

Magnetic field detection for current evaluation by magnetic force microscopy

A current measurement method through magnetic field detection by magnetic force microscopy was proposed and demonstrated. We observed the magnetic field induced by an AC below 2.2 μA around a GaAs/AlGaAs mesa stripe. To achieve high sensitivity in magnetic field detection, we tuned the AC bias frequency to the torsional resonant frequency of the cantilever. As a result, the sensitivity of the magnetic field detection was much improved and specific features of the magnetic field around the mesa stripe were clearly observed at a current in sub-μA range.     

A full‐color eyewear display using planar waveguides with reflection volume holograms

Abstract— A full‐color eyewear display with over 85% see‐through transmittance with a 16° horizontal field of view was developed. Very low color crosstalk, less than 0.008 Δu′v′ uniformity, and 120% NTSC color gamut were achieved. Waveguides with two in‐ and out‐coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples. The reflection volume hologram elements used on the waveguides realized a small thickness of 1.4 mm for each waveguide, and an out‐coupling reflection volume hologram used as an optical combiner contributed a high see‐through transmittance of 85% due to its wavelength selectivity. However, there are technical challenges in achieving a reasonable screen size and quality color images with optics that utilize holographic waveguides because holograms have large chromatic dispersions compared to conventional optical elements such as lenses and mirrors. Approaches to overcome these issues are described.     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.