Application of poly(vinyl alcohol) with an alkyl end group containing anionic groups to coal–water slurry as a dispersant

Anionic groups were introduced with copolymerization of corresponding vinyl monomers with vinyl acetate into poly(vinyl alcohol) (PVA) with an alkylthio end group. The polymers were investigated as a dispersant for coal-water slurry (CWM). Anionic groups such as sodium sulfonate and sodium carboxylate enhance remarkably the ability of PVA with an alkylthio end group to disperse coal. Sodium polyacrylic acid with an alkyl end group also showed a good ability of dispersing coal. The order of the ability of dispersing coal in these polymeric dispersants along with sodium napthalene sulfonate formaldehyde condensate (NSF) varied by the kind of coal used. In cases of the polymeric dispersants, the fluidity of coal in terms of dependence of viscosity on shear rate also varied, from dilatency to thixotropy, in accordance with coal used. Impurities in coal as well as surface properties of coal particles might play important roles in the properties of CWM. © 1995 John Wiley & Sons, Inc.     

Light-illuminated STM studies on photo-absorption in InAs nanowires

We fabricated surface InAs nanowires along GaAs giant step structures on GaAs (110) vicinal substrates, and their photo-absorption properties were studied by scanning tunneling microscopy (STM) under light illumination. In photo-induced current detection, it was difficult to identify the photo-absorption signals in the InAs nanowires because of the electrical isolation of the surface nanostructures from the conductive substrate. On the other hand, optical response measurements of differential conductance under small AC bias modulation in STM enabled us to obtain the photo-absorption signals from the surface nanostructures with avoiding such an electrical isolation problem. We successfully observed optical response images of differential conductance with a clear contrast between InAs nanowires and surrounding GaAs region by the appropriate tuning of the illuminating photon energy to excite the InAs nanowires selectively.     

Hypertrophy of Rat Skeletal Muscle Is Associated with Increased SIRT1/Akt/mTOR/S6 and Suppressed Sestrin2/SIRT3/FOXO1 Levels

Despite the intensive investigation of the molecular mechanism of skeletal muscle hypertrophy, the underlying signaling processes are not completely understood. Therefore, we used an overload model, in which the main synergist muscles (gastrocnemius, soleus) of the plantaris muscle were surgically removed, to cause a significant overload in the remaining plantaris muscle of 8-month-old Wistar male rats. SIRT1-associated pro-anabolic, pro-catabolic molecular signaling pathways, NAD and H₂S levels of this overload-induced hypertrophy were studied. Fourteen days of overload resulted in a significant 43% (p < 0.01) increase in the mass of plantaris muscle compared to sham operated animals. Cystathionine-β-synthase (CBS) activities and bioavailable H₂S levels were not modified by overload. On the other hand, overload-induced hypertrophy of skeletal muscle was associated with increased SIRT1 (p < 0.01), Akt (p < 0.01), mTOR, S6 (p < 0.01) and suppressed sestrin 2 levels (p < 0.01), which are mostly responsible for anabolic signaling. Decreased FOXO1 and SIRT3 signaling (p < 0.01) suggest downregulation of protein breakdown and mitophagy. Decreased levels of NAD⁺, sestrin2, OGG1 (p < 0.01) indicate that the redox milieu of skeletal muscle after 14 days of overloading is reduced. The present investigation revealed novel cellular interactions that regulate anabolic and catabolic processes in the hypertrophy of skeletal muscle.     

Nitrous oxide emissions for 6 years from a gray lowland soil cultivated with onions in Hokkaido, Japan

We studied nitrous oxide (N₂O) emissions every growing season (April to October) for 6 years (19952000), in a Gray Lowland soil cultivated with onions in central Hokkaido, Japan. Emission of N₂O from the onion field ranged from 0.00 to 1.86 mgN m^–2 h^–1. The seasonal pattern of N₂O emission was the same for 6 years. The largest N₂O emissions appeared near harvesting in August to October, and not, as might be expected, just after fertilization in May. The seasonal patterns of soil nitrate (NO₃ ^–) and, ammonium (NH₄ ⁺) levels and the ratio of N₂O to NO emission indicated that the main process of N₂O production after fertilization was nitrification, and the main process of N₂O production around harvest time was denitrification. N₂O emission was strongly influenced by the drying–wetting process of the soil, as well as by the high soil water content. The annual N₂O emission during the growing season ranged from 3.5 to 15.6 kgN ha^–1. The annual nitrogen loss by N₂O emission as a percentage of fertilizer-N ranged from 1.1 to 6.4%. About 70% of the annual N₂O emission occurred near harvesting in August to October, and less than 20% occurred just after fertilization in May to July. High N₂O fluxes around the harvesting stage and a high proportion of N₂O emission to total fertilizer-N appeared to be probably a characteristic of the study area located in central Hokkaido, Japan.     

Creep and shrinkage behavior of improved ultrathin polymeric films

Long‐term creep‐deformation and shrinkage characteristics of improved ultrathin polymeric films for magnetic tapes are presented. These films include poly(ethylene terephthalate) (PET), poly(ethylene naphthalate) (PEN), and aromatic polyamide (ARAMID). PET film is currently the standard substrate used for magnetic tapes, and thinner tensilized‐type PET, PEN, and ARAMID have recently been used as alternate substrates with improved material properties. The thickness of the films ranges from 6.2 to 4.8 μm. More dimensional stability is required for advanced magnetic tapes, and the study of creep and shrinkage behavior is important for estimating the dimensional stability. Creep measurements were performed on all available substrates at 25, 40, and 55°C for 100 h. Based on these data, master curves were generated using time–temperature superposition to predict dimensional stability after several years. The amount of creep deformation is considerably smaller for ARAMID and tensilized‐type PET than for PEN, although Standard PET shows the largest amount of creep. In addition, creep measurements under high humidity also show similar trends. Shrinkage measurements at 55°C for 100 h show that the shrinkage of ARAMID is lower than that of PET and PEN. The relationship between the polymeric structure and dimensional stability are also discussed. Based on the creep and shrinkage behavior, ARAMID and tensilized‐type PET seem to be suitable for advanced magnetic tapes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1477–1498, 2002; DOI 10.1002/app.10012     

Tensile and dynamic mechanical properties of improved ultrathin polymeric films

Tensile and dynamic mechanical properties of improved ultrathin polymeric films for magnetic tapes are presented. These films include poly(ethylene terephthalate) or PET, poly(ethylene naphthalate) or PEN, and aromatic polyamide (ARAMID). PET film is currently the standard substrate used for magnetic tapes; thinner tensilized‐type PET, PEN, and ARAMID were recently used as alternate substrates with improved material properties. The thickness of the films ranges from 6.2 to 4.8 μm. Young's modulus of elasticity, F5 value, strain‐at‐yield, breaking strength, and strain‐at‐break were obtained at low strain rates by using a tensile machine. Storage (or elastic) modulus, E′, and the loss tangent, tan δ, which is a measurement of viscous energy dissipation, are measured by using a dynamic mechanical analyzer at temperature ranges of ?50 to 150°C (for PET), and ?50 to 210°C (for PEN and ARAMID), and at a frequency range of 0.016 to 29 Hz. Frequency–temperature superposition was used to predict the dynamic mechanical behavior of the films over a 28 decade frequency range. Results show that ARAMID and tensilized films tend to have higher strength and moduli than standard PET and PEN. The rates of decrease of storage modulus as a function of temperature are lower for PET films than those for PEN and ARAMID films. Storage modulus for PEN films are higher than that for PET films at high frequencies, but this relationship reverses at low frequencies. ARAMID has the highest modulus and strength among the films in this study. The relationship between polymeric structure and mechanical properties are also discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2225–2244, 2002     

Effect of Drying Method on Gas Adsorption Characteristics of Carbon Gel Microspheres

Abstract

The effect of drying method used in the preparation of carbon gel microspheres was studied by comparing the porous properties of carbon cryogel microspheres (CCM) and carbon xerogel microspheres (CXM), which were respectively obtained using freeze drying and hot air drying. CCM were found to possess higher mesoporosity than CXM because freeze drying was effective to suppress the shrinkage of the mesopores during drying. On the other hand, the microporosity of the carbon gel microspheres was hardly influenced by not only the drying method but also the synthesis condition. Although the amounts of nitrogen and oxygen adsorbed were almost the same, the adsorption rate of nitrogen on both CCM and CXM possessing ultramicroporous surfaces was much larger than that of oxygen, which indicated the applicability of the carbon gel microspheres to adsorbents for pressure swing adsorption (PSA) of air. The relations between the temperature and the amount of oxygen adsorbed showed the adsorption characteristics of CCM and CXM as adsorbents for temperature swing adsorption (TSA) were almost the same.     

Detection of subunit interfacial modifications by tracing the evolution of clamp-loader complex

The archaeal and eukaryal clamp-loader and clamp proteins were investigated with the evolutionary trace method. The molecular phylogeny of the proteins suggested that the hetero-pentameric complex of the archaeal clamp-loader with two subunits (RFCL and RFCS) was not a preserved ancestral type, but a degenerated version of the eukaryal complex of five subunits (RFC1-5). The evolutionary trace of amino acid replacements during the course of subunit differentiation revealed that the replacements had accumulated preferentially at the subunit interface regions. Some of the interfacial modifications that might be responsible for the specific interaction between the subunits were conserved in the current complex.