A novel MOSFET with vertical signal‐transfer capability for 3D‐structured CMOS image sensors

We have developed a novel MOSFET that can transfer signals vertically without through‐silicon vias but by using a fully depleted silicon‐on‐insulator (FDSOI) structure with its source region connected to the back electrodes as well as the front ones. A prototype MOSFET fabricated using the backside anisotropic wet etching technique has confirmed that the electrical characteristics measured from the front and the back electrodes are identical. The subthreshold factor S of the prototype was found to be 64.5 mV/decade, suggesting a good switching performance. Since the double‐sided MOSFET has vertical signal‐transfer capability and excellent operating characteristics, it is expected to contribute to developing a More‐than‐Moore type device of three‐dimensional integration such as pixel‐parallel image sensors. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Chemical Factors Underlying the More Rapid β-O-4 Bond Cleavage of Syringyl than Guaiacyl Lignin under Alkaline Delignification Conditions

This study aimed to clarify why the β-O-4 bond cleavage of syringyl lignin is more rapid than that of guaiacyl lignin under alkaline pulping conditions. We examined whether or not three chemical factors, acidity of the α-hydroxy group, nucleophilicity of the generated α-alkoxide, and leaving ability of the leaving phenoxide, are different between syringyl and guaiacyl lignins and control the rate of the alkaline-induced β-O-4 bond cleavage, employing dimeric non-phenolic β-O-4-type lignin model compounds (LMCs) and novel methods for estimating these three factors. The results indicated that the α-hydroxy groups of syringyl-type LMCs are relatively more acidic than those of guaiacyl-type and that syringyl nucleus is a better leaving group than guaiacyl nucleus in the β-O-4 bond cleavage. These factors result in the β-O-4 bond of syringyl lignin being more prone to the alkaline-induced cleavage than that of guaiacyl lignin.     

激电测深法在贵州大观金矿区勘查中的应用

介绍了激电测深在大观金矿区的应用,在简要阐述矿区的地质和地球物理特征的基础上,介绍了物探的工作方法,重点对激电测深异常进行了推断解释.通过开展激电测深工作,大致确定F1断裂蚀变带的规模、性质,结合矿床地质资料,推测矿(化)体的大致位置,为深入开展地质找矿工作提供了有利的依据.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Effects of steroid hormones on vascular functions

The purpose of this review is to present reported findings of effects of steroids on vascular function and to discuss the biological significance in vascular physiology and pathology. Steroid hormones play various roles in vascular functions through the specific receptor localized in the endothelium and underlying vascular smooth muscle cells (VSMCs). Estrogen replacement therapy in postmenopausal women is in general associated with a reduction in mortality from cardiovascular disease and the beneficial effects of estrogens are caused by modulation of lipid metabolism, expression of leukocyte adhesion molecules, and migration of VSMCs in the vascular wall. Estrogens also play a role as vasodilators through an increment in nitric oxide (NO) production in endothelium or modulation of calcium homeostasis in VSMCs. Some progestin molecules partially oppose the effects of estrogens on vascular functions, but striking differences exist among the types of molecules. Testosterone shows a vasorelaxant response, but detailed actions of androgens on vascular functions remain unknown. Glucocorticoids act on vasoconstriction through reduced prostacyclin production, increased alpha-adrenoceptor numbers, and inhibition of NO synthase, while mineralocorticoids induce hypertrophy and hyperplasia of VSMCs and perivascular fibrosis and cause peripheral vascular resistance, in addition to changes in vascular electrocyte permeability. Some rapid actions of steroids are mediated by "nongenomic" responses in vascular tissues. Recent studies have also demonstrated that steroid-producing or -metabolizing enzymes are expressed in the vascular wall, suggesting the local regulation of steroids in the vascular system. Thus, steroid hormones greatly influence vascular functions and an understanding of the mechanisms may provide new means to prevent vascular diseases.     

Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression

A unidirectional carbon fiber reinforced plastic (CFRP) was scanned by an X-ray computed tomography (CT) system. Based on the X-ray CT images, a three-dimensional model with random fiber waviness was developed. Each fiber location was identified in a sectional CT image. Subsequently, the relative displacement of fibers between adjacent sectional CT images was obtained with a digital image correlation method. This procedure was repeated to obtain fiber waviness along the axial direction. The constructed three-dimensional fiber model showed random waviness of each fiber in the unidirectional CFRP. Finite element analysis was performed using the three-dimensional model. Simulation results showed bending and twisting deformations coupled with axial contractions during axial compression, which developed due to fiber waviness. A reduction of the fiber directional Young’s modulus due to fiber random waviness was quantitatively evaluated.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.