Chiral sensing system based on the formation of diastereomeric metal complex on a homocysteine monolayer using field effect transistor

A self-assembled monolayer (SAM) of l-homocysteine (l-Hcy) formed on the surface of a gold-deposited gate of a field effect transistor (FET) was used to differentiate between enantiomers of amino acids, for which the formation of diastereomeric metal complexes is fundamental for chiral discrimination. Here, we focus our attention on the dependence of the FET response on the analyte amino acids, the central metal ions involved in complex formation, and the solution pH. Using the l-Hcy SAM-modified gate with added Cu(II), notable negative FET responses were enantioselectively observed for the l-enantiomers of alanine (Ala), phenylalanine, and tryptophan, whereas differences in the FET responses between enantiomers were negligible for asparagine and aspartic acid. Regarding the enantioselectivity for Ala, the addition of Cu(II) was demonstrated to show higher selectivity as compared to other metal ions such as Co(II) and Ni(II). Moreover, for the addition of l-Ala and Cu(II), a particularly strong negative FET response was observed at pH 5.5.     

Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.     

Dependence of property, cathode characteristics, thermodynamic stability, and average and local structures on heat-treatment condition for LiNi0.5Mn0.5O2 as a cathode active material for Li-ion battery

LiNi_0.5Mn_0.5O₂ was heat-treated under high oxygen-pressure and Ar-reducing conditions, and then the cathode properties, thermodynamic stability and average and local structures were investigated. From X-ray diffraction and ICP measurements, it was found that the pristine LiNi_0.5Mn_0.5O₂ had a single phase of the layered rock-salt structure although the Ni content was slightly rich compared with the nominal one. These characteristics were kept even after the heat-treatments. Charge–discharge cycle tests clarified that the cycle performance of LiNi_0.5Mn_0.5O₂ was improved by both the reducing and oxidizing treatments. From neutron diffraction and X-ray absorption fine structure measurements, the local distortion around the transition metal, especially Ni, was supposed to be one of the important factors to determine the cathode properties. It was also found that the sample with higher thermodynamic stability exhibited better capacity retention in the discharge–charge cycle tests.     

Effects of Spraying Ozonated Water on the Severity of Powdery Mildew Infection on Cucumber Leaves

Effects of spraying ozonated water on the severity of powdery mildew infection, visible disorder/injury occurrence, and net photosynthesis in cucumbers were investigated. The severity in the ozonated water treatment was contained to almost the same level throughout the 14-day period of the experiment, while the severity steadily increased in the non-treated control and distilled water treatment. Neither visible disorder/injury on the leaves nor a large difference in net photosynthesis between before and after spraying the ozonated water was observed. The results indicate that ozonated water can be at least a partial alternative to agricultural chemical fungicides for powdery mildew on cucumber leaves.     

Fracture toughness of silica particulate‐filled epoxy composite

The relationship between the postcuring conditions and fracture toughness on three silica particulate‐filled epoxy composites was investigated. The glass transition temperature, T_g, and the fragility parameter, m, derived from the thermo‐viscoelasticity, were used to characterize the composites, which were postcured under various conditions. The glass transition temperature and fragility both depended on both of the curing conditions and the volume fraction of silica particles. The glass transition temperature increased with the postcuring time and temperature, while the fragility generally decreased as the volume fraction increased. There was no direct correlation between the glass transition temperature and fragility. The fracture toughness depended on both the glass transition temperature and fragility. The composites with a high glass transition temperature and low fragility had high fracture toughness. These results indicate that the glass transition temperature and fragility are useful parameters for estimating the fracture toughness of the silica particulate‐filled epoxy composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2261–2265, 2002     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

分布式计算机软件数据整合平台设计

为实现当前经济市场中各应用软件的整合,提高我国各行业间个性化软件的开发能力,加强企业间的科学化系统软件设立,保证企业的高效运行,以及质量和系统维护能力;根据较为常用的分布式计算机系统,提出一种软件数据整合平台的设计;以商用软件整合平台设计为例,以开发模式、服务、技术结构、功能为研究方向,在企业正常运行时,可以实现业务系统功能开发以及门户单点登录,提高企业的个性化系统应用和经济效益;本文根据以上基本需求提出该功能软件平台进行设计,并在实际应用中分析出对于当前企业发展所提供的助力;结果显示,在当前经济发展状况下,有效地使用软件数据整合平台可以很大程度上提高企业的科学化管理和有效的资源分配,使企业在市场竞争中提高经济效益和社会效益。     

Optical and adhesive properties of composite silica-impregnated Ca-α-SiAlON:Eu2+ phosphor films prepared on silica glass substrates

The compaction of a Eu-doped Ca-α-SiAlON phosphor powder was performed by electrophoretic deposition (EPD). The effect on the adhesion and optical properties of the silica precursor as both a binder of the powder and a filler of the air voids were evaluated. The adhesion of the silica impregnated composite film to the silica glass substrate was characterized by the tape test. The improvement of the external quantum efficiency was confirmed from the PL spectra measurement after the silica impregnation. The temperature dependence of the external quantum efficiency was also investigated in order to discuss the advantage of using the silica precursor as a binder for high-brightness LED applications.     

Water vapor solubility of poly(lactic acid) films modified the surface by vacuum ultraviolet irradiation

Surface modification of poly(lactic acid) (PLA) film is performed via 172 nm excimer lamp irradiation. Effects on water vapor solubility and physical properties via vacuum ultraviolet (VUV) irradiation are studied systematically. After VUV irradiation, water vapor solubility increases approximately 11–43% in the low‐pressure region and approximately 20–38% in the high‐pressure region as surface hydrophilicity increased. The increase is attributed to hydrogen bonding with the carboxyl groups because of VUV radiation. The modified layer is significantly swelling after water vapor sorption. The hydrophilic layer forms a thickness of 2–3 μm from the irradiated surface via VUV radiation, but no changes are observed inside the irradiated film. Therefore, PLA film solubility after irradiation is enhanced by hydrophilicity and the swelling effect of the surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42200.     

Synthesis and Unique Photoluminescence Properties of Eu2Ti2O7 and Eu2TiO5

The europium titania materials, pyrochlore Eu₂Ti₂O₇ and orthorhombic Eu₂TiO₅, were synthesized from a mixture of Eu₂O₃ and TiO₂ using the solid‐state reaction method. The structural and optical properties of these titania materials were investigated using X‐ray diffraction analysis, photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and diffuse reflectance spectroscopy. Temperature dependence of the PL intensity was measured between T = 20 and 450 K and analyzed on the basis of various theoretical models. A remarkable increase in the PL intensity with increasing T was observed in these titania materials at higher temperatures, above ~140 K, and well explained by a trap/reservoir model. Interestingly, a dramatic decrease in the electric‐dipole emission component relative to the magnetic‐dipole one was observed in Eu₂Ti₂O₇ above T ~ 140 K. The schematic energy‐level diagram for Eu³⁺ in the Eu₂Ti₂O₇ host was proposed for the sake of a better understanding of the PL and PLE processes in this type of phosphorescent material.