Enhancing gas phase Fischer-Tropsch synthesis catalyst design

This paper presents the results on the research in the development of a Fe-based catalyst with Co as a co-catalyst, and Ru and ZnO as promoters. The catalytic performance of these materials for FT synthesis was investigated in the gas phase employing a fixed bed reactor system. The Fe-Zn-K/γ-Al₂O₃ catalyst performance was used as the benchmark. The data show that by varying the process conditions (T, P, flow rate), it is possible to achieve a narrow distribution of the liquid products. The effect of co-catalysts and promoters such as K and Zn are also presented. The results from a series of Fe₄Co₁Zn_0.04 based catalysts for Fischer-Tropsch (FT) synthesis, in which the different amounts of Ru are incorporated showed that the addition of Ru suppressed the CH₄ formation at the cost of increasing the CO₂ selectivity. The newly designed catalysts showed significantly high activity towards CO conversion (>70%), along with low selectivity towards CO₂ (5-15%) and methane (ND - 3%). It is also shown that the support material plays a role in the selectivities obtained.     

The effect of Al–O substitution for Si–N on the luminescence properties of YAG:Ce phosphor

The present paper describes the effect of various Si–N substitution degree on the crystal structure and optical properties of yellow YAG:Ce phosphor commonly used with combination of InGaN in white LEDs. It has been found that the course of silicon/nitrogen YAG:Ce garnet doping as well as formation of the liquid phase and its chemical composition controlled formation of the side phase besides YAG:Ce. Substitution of Al–O for Si–N chemical bonds according to the general formula Y_2.94Ce_0.06Al_(5?x)Si_xO_(12?x)N_x was confirmed by changes of the unit cell parameter and formation of the Si–N bonds as detected by FT-IR studies. Formation of the nitrogen ligand in cerium arrangement resulted in a red shift in emission spectrum of trivalent cerium if nominal x value was in the range of 0.2–0.3. Above x = 0.3 only decrease of emission intensity was observed because of the secondary phase precipitation but further solution of Si–N in YAG:Ce crystal lattice cannot be excluded.     

Simplified modeling strategies for surrogate validation with multivariate failure-time data

The linear mixed effects model has become a standard tool for the analysis of continuous hierarchical data such as, for example, repeated measures or data from meta-analyses. However, in certain situations the model does pose unavoidable computational problems. In the context of surrogate markers, this problem has appeared when using an estimation and prediction-based approach for the evaluation of surrogate endpoints. Convergence problems can occur mainly due to small between-trial variability or small number of trials. A number of alternative strategies has been proposed and studied for normally distributed data, but not such study has been conducted for other types of endpoints. The idea is to study if such simplified strategies, which always ignore individual level surrogacy, can also be applied when both surrogate and true endpoints are of failure-time types. It is shown via simulations that the 3 simplified strategies produced biased estimates, especially for the cases in which the strength of individual level association is different from the strength of trial level association. For this reason, it is recommended not to use simplified strategies when dealing with failure-time data, in contrast to the case of normally distributed data, for which simplified strategies are recommended. Possible reasons for this discrepancy might be that, in this case, ignoring the individual level association influences estimates of the mean structure parameters, what results in distorted estimates of the trial level association.     

Coralyne Radiosensitizes A549 Cells by Upregulation of CDKN1A Expression to Attenuate Radiation Induced G2/M Block of the Cell Cycle

Coralyne is a synthetic analog of berberine related to protoberberine-isoquinoline alkaloids. Isoquinoline derivatives and analogs are renowned as potent radiosensitizers with potential medical application. In the present study, we investigated the effect of coralyne on the cell death, cytoskeletal changes and cell cycle progression of irradiated A549 cells. A clonogenic assay revealed that coralyne pretreatment decreased the viability of A549 cells in a time- and dose-dependent manner. Moreover, exposure to coralyne and ionizing radiation (IR) markedly altered the filamentous actin cytoskeletal architecture and integrin-β binding sites of A549 cells. Treatment with 1–25 µM coralyne in combination with 2 Gy of IR significantly reduced the percentage of cells in G2/M phase compared with 2 Gy IR alone. These results indicate that coralyne is a potent radiosensitizing agent that may find an application in medicine.     

DMajor—Application Programming Interface for Database Mining

In the process of rule generation from databases, the volume of generated rules often greatly exceeds the size of the underlying database. Typically only a small fraction of that large volume of rules is of any interest to the user. We believe that the main challenge facing database mining is what to do with the rules after having generated them. Rule post-processing involves selecting rules which are relevant or interesting, building applications which use the rules and finally, combining rules together to form a larger and more meaningful statements. In this paper we propose an application programming interface which enables faster development of applications which rely on rules. We also provide a rule query language which allows both selective rule generation as well as retrieval of selected categories of rules from the pre-generated rule collections.     

THE INFLUENCE OF N-ALKANES ON WETTABILITY DF LOW COAL RANKS

Abstract

Contact angle measurements were carried out in coal / n-alkanes film - air bubble - water systems. Then theoretical an analysis of the equilibrium state of that system was carried out on the basis of the components of the surface free energy of coal of various ranks. The contact angles were measured for four ranks of Polish coal which surfaces were covered with n-alkanes film in the homological series from n-hexane to n-hexadecane. On the basis of the studies and calculations carried out we have concluded that the values of the contact angle depend on the rank of coal, a thickness of n-alkane film and its structure and the presence of water film under the air bubble. It was also found that the changes of the- values of the contact angles measured in the mentioned sytems as a function of the number of contacted air bubbles were similar to those calculated on the basis of the solution of Young equation in function of the surface free energy of coals precovered with n-alkane film.     

A two-scale approach for trabecular bone microstructure modeling based on computational homogenization procedure

In this paper the numerical implementation of two-scale modelling of bone microstructure is presented. The study is a part of long-term project on bone remodelling which drives bone microstructure change based directly on trabeculae surface energy. The proposed approach is based on a first-order computational homogenization technique. The coincidence of macro- and micro-model kinematics is done with the use of uniform displacement and traction boundary conditions. The computational homogenization procedure is driven by a self-prepared manager which is coded in Python. The computation on real bone structure (a piece of female Wistar rat bone) is performed as well.     

Pull-through performance of carbon fibre epoxy composites

An investigation of the through-thickness properties of carbon fibre prepreg laminates, Non-Crimp Fabric laminates and non-crimp 3D orthogonal woven composites by pull-through testing was performed. Influence of matrix system and curing temperature on the performance of the 3D woven composites was investigated.