Remote sensing system for spatial electric field strength using free space light transmission

Most of the breakdowns in an electric power system are caused by lightning to the tower used for high‐voltage transmission wires. To avoid accidents due to lightning, it would be desirable to develop a measurement system for the spatial electric field distribution around the tower. We have developed a new system that can measure the electric field around the steel tower for electric power transmission by using an optical electric sensor. In conventional methods, the sensor is generally illuminated by light transmitted by optical fibers. On the other hand, the new measurement system illuminates the Pockels sensor directly by using a laser to measure the far electric field. Furthermore, our newly proposed feedback system makes it possible to measure the spatial electric field without concern for the change of Pockels sensor's operation point influenced by temperature change. This system is applicable as a remote sensing system to monitor the spatial electric field around a high‐voltage transmission line. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 10–19, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20552     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

X-ray Photoemission Spectroscopy (XPS) and Thermally Stimulated Current (TSC) Studies on the Resistance Degradation of Iron-Doped Titania Ceramics

An anomalous increase of current with time has been found in iron-doped titania ceramics that have been subjected to a constant field. The result of thermally stimulated current analysis shows a peak at a temperature of 170°–180°C, which increases because of the depolarization of oxygen vacancies. X-ray photoemission spectroscopy indicates that an electrical stress results in an electrochemical reduction inside the specimen, particularly on the cathodic side. These results reinforce the viewpoint that the space charge that is responsible for the anomalous current results from a blockage of the O₂( g )/O²⁻( s ) ion transfer at the cathode.     

Synthesis of Succinic Gemini Surfactants and the Effect of Stereochemistry on Their Monolayer Behaviors

In this work, succinic gemini surfactants, dl‐ and meso‐2,3‐bis(alkyl)succinic acids (alkyl: C₆H₁₃–C₁₃H₂₇), were successfully synthesized by oxidative coupling of enolates of fatty acid tert‐butyl esters with copper(II) bromide followed by treatment with CF₃COOH. Focusing on the influence of stereochemistry (dl‐ and meso‐) of succinic geminis, their monolayer behaviors at the air–water interface were explored using surface pressure–area (Π–A) isotherms, the compression modulus of monolayers (ε_s), and Brewster angle microscope (BAM) analysis. meso‐2,3‐Bis(undecyl)succinic acid showed a unique isotherm where the surface pressure drastically decreased at A = ~0.56 nm² (Π = 21.9 mN m^?1) regardless of compression rates and subphase temperatures, while dl‐isomer showed the common isotherm of gas → liquid‐expanded → liquid‐condensed phase transitions. BAM analysis on meso‐2,3‐bis(undecyl)succinic acid films at the air–water interface showed that small islands of aggregates appear just after the maximum pressure (A = ~0.56 nm²), and on further compression needle‐shaped assemblies appear that can grow in size. It was reasonably concluded that hydrophobic interactions can operate more effectively in meso‐isomers than in dl‐isomers, and that meso‐molecules can “jump up” to cause a transition from monolayer to bilayer. This is the first finding of the “jumping‐up” phenomenon of gemini surfactants having meso‐stereochemistry.     

Improving the photovoltaic performance of co‐evaporated Cu2ZnSnS4 thin‐film solar cells by incorporation of sodium from NaF layers

We have investigated the influence of sodium (Na) on the properties of co‐evaporated Cu₂ZnSnS₄ (CZTS) layer microstructures and solar cells. The photovoltaic performance and diode properties were improved by incorporating Na from NaF layers into the CZTS layers, while Na had a negligible effect on the microstructural properties of the layer. The best cell fabricated by using an optimal CZTS layer (Cu/(Zn + Sn) = 0.70, Zn/Sn = 1.8) yielded an active area efficiency of 5.23%. The analysis of device properties suggests that charge‐carrier recombination at CZTS/CdS interface is suppressed by intentional Na incorporation from NaF layers. Copyright © 2016 John Wiley & Sons, Ltd.     

Stability of liquid‐crystal layers based on the analysis of the adsorption on the alignment‐layer surface

Abstract— The adsorption strength of liquid‐crystal molecules on the alignment‐layer (polymer) surface was judged measuring temperature dependence of birefringence of an absorbed liquid‐crystal layer above the nematic—isotropic transition temperature. The relationship between the surface‐order parameter and the adsorption strength of liquid‐crystal molecules on the non‐rubbed polymer surface was also discussed.     

A fuzzy model to control the temperature in the cooling of metal molds with a spray robot

In a die-casting operation, the die spray is the key to quality and productivity, but the die-spray operation depends on parameter settings such as the spray volume and the operator's experience, even when a robot sprayer is used. The purpose of this study was to establish an intelligent system to control the surface temperature of a die with a water-based mist spray. A fuzzy model was applied to determine the optimum mist spray volume. The results generated show a good match with the actual measurements of the rate of the temperature drop versus the spray-mist volume. After the fuzzy analysis, the spray parameters calculated were used to control an actual die temperature experiment conducted on a heated plate model. The fuzzy model constructed by using fundamental experiments allowed the die spray operation to maintain a predetermined spray volume. This work was presented in part at the Fourth International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–22, 1999     

Characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol

In this study, we report the characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol. The characterization of carbonaceous films by electrodeposition was examined by means of Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), electron energy loss spectroscopy (EELS), secondary ion mass spectrometry (SIMS), atom probe (AP) and high resolution-elastic recoil detection analysis (HR-ERDA). From these results, it was found that the films deposited on the metal substrates were composed of the sp² and sp³ carbon contents, of which the ratio was about 7:3. Furthermore, the films by electrodeposition contained much hydrogen. The hydrogen contents in the surface were about 60 at.% and those in the subsurface were a few 10 at.%.