Visualization of Knoop Indentation Damage of Silicon Nitride by Plasma Etching

A visualizing technique for indentation damage of ceramics was developed. Plasma etching was used to enhance the view of cracks and the subsurface microcracking crush zone following Knoop indentation of hot pressed Si₃N₄. The microcracking zone was readily identified from the surface view of the indented surface as a grain-falling-off region (GFOR), defined as a region in which grains were removed by preferential etching using CF₄ gas, followed by ultrasonic cleaning. A fissure-like opening corresponding to the indentation cracks was also observed. It is inferred that the formation of the GFOR region and the fissure-like opening were caused by the etching/cleaning treatment. Meanwhile, the etching on a section which included diagonals of the impression provided a section view of the microcracking zone.     

由疏散地图到城市建设的平台 ——论“逃生地图”的可能性

所谓“疏散地形时间地图”（一般叫逃生地图）是指从绘制详细的疏散地图到致力于震后重建方法论的一系列举措。这一系列举措不仅保护了众多今后可能会没落的地域文化。而且还从地震中吸取教训,在进行建设和规划以人命优先为主旨的城市的前提下尝试着对地域进行改变。本文主要介绍了“逃生地图”概要、地方研讨会的地图效果以及逃生地图在汽车导航服务方面的应用等。     

The roles of the Trommsdorff–Norrish effect in phase separation of binary polymer mixtures induced by photopolymerization

Influence of the Trommsdorff–Norrish (T–N) effect on the phase separation of methyl methacrylate (MMA)/poly(ethyl acrylate) (PEA) mixtures undergoing photo-polymerization was examined by a combination of several experimental techniques. By FT-IR spectroscopy, it was found that the polymerization conversion explosively increases at the onset of this T–N effect. The characteristic irradiation time τ at which this effect occurs, strongly depends on the light intensity and gradually shifts to early time as the irradiation intensity increases. The shrinkage of the mixture observed in situ by laser-scanning confocal microscopy exhibits a transition at a particular irradiation time which is slightly longer than the characteristic time τ. By gel permeation chromatography (GPC), it was found that the molecular weight of the resulting PMMA was almost unchanged before τ and suddenly increases about an order of magnitude after the onset of the auto-acceleration effect. Finally, the characteristic length scales of the morphology also quickly increase with irradiation time and are eventually frozen by this T–N effect. These experimental results indicate that the Trommsdorff–Norrish effect plays an important role in the kinetic processes of polymerization-induced phase separation, suggesting an efficient tool to control the morphology of the polymerizing mixture.     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Kinetics of CO2 reforming of methane by catalytically activated metallic foam absorber for solar receiver-reactors

Ni–Cr–Al metallic foam absorber with high porosity was catalytically activated using a Ru/γ-Al₂O₃ catalyst, and was subsequently tested with respect to CO₂ reforming of methane in a small-scale volumetric receiver-reactor by using a sun-simulator. A chemical storage efficiency of 37% was obtained for a mean light flux of 325 kW m⁻². Furthermore, the activity and the stability of the metallic foam absorber were compared with those of a SiC foam absorber activated with the same Ru/γ-Al₂O₃ catalyst for 50 h of light irradiation, and it was found that the metallic foam absorber has superior catalytic stability in comparison to the SiC form absorber. In addition, unlike ceramic foams such as SiC, metallic foams feature superior plasticity, which prevents the emergence of cracks caused by mechanical or thermal shock.     

Addition polymerization of norbornene, 5-vinyl-2-norbornene and 2-methoxycarbonyl-5-norbornene with a catalyst based on a palladium(0) precursor complex

Pd(dibenzylideneacetone)₂, when activated in situ with 1 equiv of [CPh₃][B(C₆F₅)₄] in the presence of 1 equiv of P(C₆H₁₁)₃, efficiently catalyzed the addition polymerization and copolymerization of norbornene and its derivatives. Homopolymerization of 5-vinyl-2-norbornene took place regio-selectively with the endo-cyclic double bond to give high-molecular weight polymers, while the exocyclic double bond remained intact so that the resulting polymer had pendent vinyl groups along the polymer chain. In the polymerization of a mixture of the endo-/exo- isomers of 2-methoxycarbonyl-5-norbornene, the endo-isomer was consumed prior to consumption of the exo-isomer, contrary to the well-known tendency in Pd(II)-based catalyst systems. Another notable feature of the present catalytic system was the strong dependency of the molecular weight on the reaction temperature, which was studied in detail for the copolymerization of 2-methoxycarbonyl-5-norbornene with norbornene: we could control the molecular weight without the use of a chain transfer agent. The extracted oligomeric fraction of poly(norbornene) showed the presence of a terminal CC double bond as well as a C₆F₅ unit that was bound to the first norbornane unit in the polymer chain.     

Electro-mechanical coupling in ionic gels

An ionic-polymer–metal-composite film shows electro-mechanical coupling. When the film is bent, electric current is induced. Measurement of the induced current indicates that the current depends on the speed of bending, but the total amount of the charge transferred across the film is independent of the speed, and depends only on the magnitude of the bending. The result indicates that in addition to previously proposed dynamical coupling effect, there is a static electro-mechanical coupling effect. Mathematical model is proposed to describe this phenomena.     

Predictive factors of psychological disorder development during recovery following SARS outbreak.

Objective: To investigate strategies for broad mass isolation during outbreaks of infectious diseases. Design: A survey using a self-administered questionnaire was conducted on 300 printing company workers in Beijing, China, which was under mass isolation following the 2003 SARS outbreak, in the 7-8 months after the isolation was lifted. Main Outcome Measures: Individuals with psychological disorders were classified on the basis of scores on the 30-item General Health Questionnaire during the recovery period. Psychological disorders were observed in 49 of 187 respondents (26.2%; 95% CI = 20.2, 32.7). Results: The predicting factor with the highest correlation was income reduction, with an odds ratio of 25.0. Other items obtained were gender, range of activities, eating restrictions, restrictions in going out, disinfection of clothing, and infection control, with odds ratios of 3.2, 5.5, 3.9, 3.2, 0.2, and 0.1, respectively, and the contribution ratio was 87.7%. Conclusion: Securing income is suggested to be important in future strategies. (PsycINFO Database Record (c) 2010 APA, all rights reserved)