In situ synthesis of TiC particulate-reinforced aluminum matrix composites

Particulate TiC-reinforced aluminum composite specimens were processed by compacting a mixture of titanium, carbon, and aluminum powders into preforms that were infiltrated with molten aluminum and subsequently heated in a differential thermal analyzer to about 1573 K under argon atmosphere. The onset of formation of TiC particles began at about 1150 K by reaction of TiAl₃ with Al4C₃. Subsequent formation of TiC particles at higher temperatures to approx-imately 1265 K occurred by direct reaction of carbon with TiAl₃. Above this temperature, the TiC particles coarsened with increasing temperature from an initial size of about 0.15μm. TiC particles were also produced in preforms that were not infiltrated; however, the presence of liquid aluminum in infiltrated specimens inhibited particle agglomeration and sintering. Infil-trated preforms could, therefore, serve as excellent "master alloys" for subsequent dilution in an aluminum melt and processing of metal-matrix composites (MMCs) reinforced with sub-micron TiC particulates. Formerly Research Scientist, Massachusetts Institute of Technology, Cambridge, MA 02139     

Chemical modification of group IV graphene analogs

Mono-elemental two-dimensional (2D) crystals (graphene, silicene, germanene, stanene, and so on), termed 2D-Xenes, have been brought to the forefront of scientific research. The stability and electronic properties of 2D-Xenes are main challenges in developing practical devices. Therefore, in this review, we focus on 2D free-standing group-IV graphene analogs (graphene quantum dots, silicane, and germanane) and the functionalization of these sheets with organic moieties, which could be handled under ambient conditions. We highlight the present results and future opportunities, functions and applications, and novel device concepts.     

Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents

Recently, the development of efficient and environmentally benign solvents has received great attention to replace current harsh organic solvents. In this context, low-transition-temperature mixtures (LTTMs) have emerged as favorable green solvents for biomass delignification. Palm oil biomass, empty fruit bunch (EFB) was pretreated with commercial l-malic acid and microwave hydrothermally extracted cactus malic acid-derived LTTMs at 60, 80, and 100 °C. The LTTMs applied in this study were derived from malic acid–choline chloride–water and malic acid–monosodium glutamate–water with a molar ratio of 2:4:2 and 3:1:5, respectively. Three first-order reactions were used to express the delignification kinetic model of EFB. The first term was based on the initial stage and assigned as infinite due to the fast rate of delignification which could not be detected. The second and third terms were proportional to bulk and residual delignification stages. A good agreement was obtained between the kinetic model and the experimental data obtained in this study with R²?≥?0.91. The activation energies for the delignification reactions using l-malic acid and cactus malic acid-based LTTMs in the bulk and residual stages were approximated as 36–56 and 19–26 kJ/mol and 34–90 and 47–87 kJ/mol, respectively.     

Curvature continuous path generation for autonomous vehicle using B-spline curves

In this paper we introduce a roadmap algorithm for generating collision-free paths in terms of cubic B-spline curves for unmanned vehicles used in mining operations. The algorithm automatically generates collision-free paths that are curvature continuous with an upper bounded curvature and a small slope discontinuity of curvature at knots, when we are given the locations of the obstacles, the boundary geometry of the working area, positions and directions of the vehicle at the start, loading, and the goal points. Our algorithm also allows us to find a switch back point where the vehicle reverses its direction to enter the loading area. Examples are provided to demonstrate the effectiveness of the proposed algorithms.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.     

A preliminary study on learning effect in a contact positioning task in a virtual environment

How the human central nervous system adjusts sensorimotor coordination to haptic stimuli is a major topic in several fields including robotics. There are studies focusing on contact positioning tasks such as catching a ball or a volley in tennis, where position control of a human hand is required only at the moment of contact for successful completion of the tasks. A previous study dealt with a task of catching a ball in a virtual environment, and reported an interesting observation of the learning process in the relationship between operational performance and energy consumption of an operator; however, the operational condition given to the operators in the previous study seemed to be relatively simple. The interest in this paper is similar to that of the previous study; however, this paper considers application of a slightly more complex operational condition to a task of catching a ball. For corresponding to increase of difficulty in operation in the task, two movements of a paddle for catching a ball are given to operators, and difference between the movements is observed. Although the final goal of the study in this paper is similar to that in the previous study, this paper considers how learning effect can be observed in operational performance by comparing the performance of novice operators with that of experienced operators. The comparison shows differences in the performances between the operators from three analytic aspects. This paper also considers how many operations are required for novice operators to exhibit the learning effect in operational performance.     

A Network Architecture with High Availability for Real-time Premium Traffic over the Internet

Real-time traffic will be a predominant traffic type in the next generation networks, and networks with 100% reliability and availability will be required by real-time premium traffic. It is believed that QoS guarantees could be better provided by connection oriented networks such as Multi Protocol Label Switching (MPLS). These connection oriented networks are more vulnerable to network failure. Conventional path protection methods perform re-routing to cope with this. However, re-routing always causes packet losses and results in service outage. These losses are bursty in nature and highly degrade the QoS of the real-time premium traffic. Thus, 100% availability cannot be achieved by conventional methods. The novel path protection proposed in this paper recovers the bursty packet losses due to re-routing by using forward error correction (FEC) path. Therefore, it can provide network architecture with no service outage for such traffic. The numerical results show that the proposed method can achieve a very high availability for real-time premium traffic in future IP/MPLS networks.

Japanese/English Cross-Language Information Retrieval: Exploration of Query Translation and Transliteration

Cross-language information retrieval (CLIR), where queriesand documents are in different languages, has of late become one ofthe major topics within the information retrieval community. Thispaper proposes a Japanese/English CLIR system, where we combine aquery translation and retrieval modules. We currently target theretrieval of technical documents, and therefore the performance of oursystem is highly dependent on the quality of the translation oftechnical terms. However, the technical term translation is stillproblematic in that technical terms are often compound words, and thusnew terms are progressively created by combining existing basewords. In addition, Japanese often represents loanwords based on itsspecial phonogram. Consequently, existing dictionaries find itdifficult to achieve sufficient coverage. To counter the firstproblem, we produce a Japanese/English dictionary for base words, andtranslate compound words on a word-by-word basis. We also use aprobabilistic method to resolve translation ambiguity. For the secondproblem, we use a transliteration method, which corresponds wordsunlisted in the base word dictionary to their phonetic equivalents inthe target language. We evaluate our system using a test collectionfor CLIR, and show that both the compound word translation andtransliteration methods improve the system performance.     

Efficient blind dereverberation and echo cancellation based on independent component analysis for actual acoustic signals

This letter presents a new algorithm for blind dereverberation and echo cancellation based on independent component analysis (ICA) for actual acoustic signals. We focus on frequency domain ICA (FD-ICA) because its computational cost and speed of learning convergence are sufficiently reasonable for practical applications such as hands-free speech recognition. In applying conventional FD-ICA as a preprocessing of automatic speech recognition in noisy environments, one of the most critical problems is how to cope with reverberations. To extract a clean signal from the reverberant observation, we model the separation process in the short-time Fourier transform domain and apply the multiple input/output inverse-filtering theorem (MINT) to the FD-ICA separation model. A naive implementation of this method is computationally expensive, because its time complexity is the second order of reverberation time. Therefore, the main issue in dereverberation is to reduce the high computational cost of ICA. In this letter, we reduce the computational complexity to the linear order of the reverberation time by using two techniques: (1) a separation model based on the independence of delayed observed signals with MINT and (2) spatial sphering for preprocessing. Experiments show that the computational cost grows in proportion to the linear order of the reverberation time and that our method improves the word correctness of automatic speech recognition by 10 to 20 points in a RT??= 670 ms reverberant environment.