Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al₂O₃ was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100–1600 °C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14 m²/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al₂O₃ in the sintered samples. Thermal properties of the sintered Al₂O₃ fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al₂O₃ and therefore improved its potential use as an insulating material.     

Antioxidant and antiglycation properties of Passiflora alata and Passiflora edulis extracts

The leaves of Passiflora alata Dryander and Passiflora edulis Sims, traditionally used in American countries to treat both anxiety and nervousness by folk medicine, are rich in polyphenols, which have been reported as natural antioxidants. In this study, the antioxidant activities of P. edulis and P. alata hydroalcoholic leaf extracts were verified in in vitro and ex vivo assays. P. alata showed a higher total reactive antioxidant potential than did P. edulis. The antioxidant activities of both extracts were significantly correlated with polyphenol contents. In addition, both extracts attenuated ex vivo iron-induced cell death, quantified by lactate dehydrogenase leakage, and effectively protected against protein damage induced by iron and glucose. These findings demonstrate that the P. alata and P. edulis leaf extracts have potent in vitro and ex vivo antioxidant properties and might be considered as possible new sources of natural antioxidants.     

A comparison of the performance of lightweight glass containers manufactured by the P&B and B&B processes

The mechanical performance of lightweight glass packages produced by the NNPB (narrow neck press and blow) process was evaluated by comparison with the same glass packages (regular weight) produced by the conventional process (blow and blow). The temper number (annealing process evaluation), thickness distribution behaviour and mechanical performance (impact, vertical load and thermal shock strength) were analysed before and after line simulation, applied in optimized conditions in the laboratory. The performance of lightweight glass packages under transport simulation (truck envelope) in relation to the regular weight bottles was also evaluated. Both bottles presented residual stress values within the specified limits. The lightweight glass bottles had a more homogenous thickness distribution in comparison with the regular weight bottles and a better performance (about 33% improvement) in relation to the impact strength, especially in the heel, even when evaluated after line simulation. As to the vertical load strength, the lightweight glass bottle also indicated a superior performance to the regular weight bottle, both before and after line simulation. Both bottles withstood the temperature difference of 42°C that such packages are supposed to resist according to thermal shock specification. Due to the better thickness distribution of lightweight glass packages, they withstood a maximum temperature difference (progressive thermal shock) of 5–10°C higher than the regular weight bottles. No restrictions of the lightweight glass packages submitted to the transport simulation were found. Copyright © 2002 John Wiley & Sons, Ltd.     

Amount of subarachnoid blood and vasospasm: current aspects. A transcranial Doppler study

Subsequent to admission after aneurysmal subarachnoid haemorrhage (SAH), 120 patients (74 women and 46 men) underwent microsurgical clipping of a total of 158 cerebral aneurysms within 96 hours after the bleed. Their mean age was 46 (20-91) years. Computed tomography (CT) findings were graded according to the modified Fisher scale and all patients had daily transcranial doppler (TCD) recordings of their basal cerebral arteries. In 19% of SAH was grade I on CT, in 44% grade II and in 37% grade III. The rate of patients who developed severe vasospasm as documented by TCD (mean blood flow velocities exceeding 160 cm/s on 2 or more consecutive days) was 39% for grade I patients, 26% for grade II patients and 34% for patients with SAH grade III on the initial CT. There was no difference in the rate of occurrence of severe vasospasm, when the patients were split into 2 groups according to the time of performance of the initial CT scan-within 24 hours, and 48-80 hours after SAH, respectively. It is concluded that the amount of subarachnoid blood on the initial CT scan should no longer be used as the indicator for occurrence and severity of the multifactorial entity vasospasm.     

Selective Sharing of Load Current Components Among Parallel Power Electronic Interfaces in Three-phase Four-wire Stand-alone Microgrid

This paper investigates selective sharing of load current components among the parallel operation of distributed generators (DGs) in three-phase four-wire stand-alone microgrids. The proposed control method is based on master-slave operation of DGs, and the goal of selective sharing of load current components is to have DGs located in close proximity of the load operating in slave mode, in order to inject their available energy and also compensate the non-active load current components, while the distant DGs might operate in master mode to share the remaining load autonomously. Droop control is employed due to impracticality of communication at remote nodes, and resistive line impedance compensation is adopted to decouple active and reactive power controllers and ensure proper active power sharing among master DGs, irrespective of the mitigation of non-active current components by the slave inverters. The sharing factors for each current component are determined by a higher level control. The Conservative Power Theory (CPT) decompositions provide decoupled power and current references for the inverters, resulting in a selective sharing strategy. The principles supporting the developed control strategy are discussed, and the effectiveness of the control is demonstrated through computational simulations using PSIM software.     

Synthesis and characterization of iron oxide nanoparticles dispersed in mesoporous aluminum oxide or silicon oxide

Iron oxide nanoparticles dispersed in aluminum (Al) or silicon (Si) oxides were prepared via a polymeric precursor derived from the Pechini method. The samples were characterized by thermogravimetric analysis, Fourier-transform infrared spectroscopy, X-ray diffraction, N₂ adsorption/desorption isotherms (Brunauer–Emmett–Teller, BET), M?ssbauer spectroscopy, and vibrating sample magnetometry (VSM). BET analysis shows that the samples are mesoporous materials and have a high surface area. The size of the Fe₂O₃ nanoparticles in Al₂O₃ is smaller than that in SiO₂. M?ssbauer spectra of the samples show that the Fe₂O₃ nanoparticles in Al₂O₃ are non-magnetic at room temperature but magnetic below 50 K. The FeSi samples are magnetic at both room and low temperatures. The magnetic measurements with VSM confirmed this point.     

Constructing nurse schedules at large hospitals

Several heuristics, based on evolutive algorithms and local search, are used to solve the nurse scheduling problem at a large hospital. Due to several intricate and specific restrictions imposed on the schedules, the problem is a difficult one to solve by hand. Moreover, some of the restrictions have a subjective value attached to them, and this constrains the use of exact methods that search for global optima. In order to facilitate the use of the solver modules by the hospital staff, a user interface was also implemented.     

底部填充工艺的瞬时温度环境管理

微电子组装的大部份工艺开发都要求将元件做到更小,以便在尺寸日益缩小的便携式设备上实现更多功能。阐述了大元件的底部填充,即一侧的尺寸超过15mm,底部填充的胶量介于30～50mg。大尺寸晶元的制造工艺要求比现有生产线更大的产能,这就给底部填充点胶带来更大的挑战。大元件的产能超过3000个/h时,需要点胶机点出非常多的胶水。如此多的胶水在出胶前通过点胶阀,这将会带来加热的问题-某些工艺要求出胶前胶水必须要加热。这会对胶点尺寸有影响,因为随着温度的变化,底部填充的胶水黏度也会随之变化,从而轻微影响点出的胶量。从而将影响晶元相邻的“非沾染区”。稳定的温度是点胶稳定性的保证,并且能帮助胶水流进晶元下方同时也有助胶水分离从而更容易喷射出来。从研究中可以观察到：系统温度环境（点胶机内部）对点胶的胶水质量有影响。     

Characteristics of Staphylococcus hyicus strains isolated from pig carcasses in two different slaughterhouses

In a previous study, we showed that coagulase positive staphylococci, which are often used as indicators for Staphylococcus aureus, are frequently found on pig carcasses. Further characterization of the strains identified only a minor part as S. aureus. Selected non-S. aureus strains were all identified as Staphylococcus hyicus, However, two studies described in this species strains that produce staphylococcal enterotoxins. The aim of the present study was to further characterize such coagulase positive S. hyicus strains isolated from pig carcasses and to assess the results for their food safety relevance. A total of 189 strains from two abattoirs were characterized. Phenotypically, 98.9% showed non-pigmented colonies, 99.5% no haemolysis and 67.7% were egg yolk-positive. DNase activity was found in all but one isolate. Only five of the 189 strains were resistant to the antimicrobials tested. One strain harboured the mecA gene. Exfoliative toxin genes were detected in 31 (16.4%), S. aureus enterotoxin genes in none of the strains.The PFGE genotyping results show only a limited number of clusters. Cluster I included more than 50% of the strains. The fact that similar or closely related PFGE patterns of S. hyicus can be found on carcasses after bleeding in both abattoirs indicates the occurrence of widespread strains in the Swiss pig population. Moreover, the genotyping results revealed a remarkable homogeneity in S. hyicus strains isolated from different process stages in abattoir B, which could indicate a recontamination problem with persisting strains.