难熔金属与硬质材料进展─—从第十三届国际普兰西会议看发展动向（Ⅰ）

根据第十三届国际普兰西会议获得的信息，对国际上难熔金属、硬质合金、硬质材料和涂层技术等方面近几年来的研究和发展动态进行了综合评述。最后，提出了几点自己的看法。     

Stored energy analysis of Zn—5Al eutectic alloy in superplastic deformation

The stored energy and the energy release during SPD(superplastic deformation)of a Zn-5Al alloy were studied.The alloy after rolling process gains more stored energy,and the as-rolled speciment can obtain maximum elongation and minimum flow stress without hot loding treatment before SPD.Experimental results show that stroed energy release process is along with SPD process and is also an impetus to SPD.The as -rolled Zn-5Al alloy has 48J/mol stored energy which was measured with DSC(differential scanning calorimeter)and conforms well to the calcuated value.The as-rolled Zn-5Al alloy after SPD with an elongation of 2500% releases 112J/mol stored energy,Analysis shows that the strain rate is in direct ratio to the rate of stred energy release.     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

分散图象压缩的遗传算法

基于分形和PIFS函数的特点，提出一种改进的遗传算法用于分形压缩分块的定义域匹配搜索算法。该方法克服了原来分形图象压缩中分类匹配算法固有的局部最优性和随机搜索的缺点，是一种具导引的全局优化的搜索算法。分析和实验表明，该方法的图象压缩比高，解码质量好，若应用遗传算法的并行性，其编码速度也得到提高。     

多级泵站老化的模糊评价模式

多级泵站是一个包括各级泵站及泵站内各种设施的复杂系统，系统内各个泵站的老化直接影响整个泵站系统的正常运行，采用单元化方法将多级泵站系统单元伦，引和泵站老化评价指标，建立了多级泵站老化的模糊评价模式，并对甘肃省景泰高扬程提水灌区多级泵站系统进行分析，提出了评价多级泵站老化程度的排序方法。     

车号定位识别与可信度估计

以车号的定位与识别为例，应用行投影法对车号图片进行倾斜行定位，证明了模拟与场景的二维互相关系数近拟等于一维投影互相关系数，在此基础上提列投影法快速行扫描识别算法及相应的可信度估计方法，这种方法对于室外拍摄的有复杂背景，光照变化，字体微倾，字符排列疏密不均及噪声干扰的车牌图像具有很好的识别效果。     

An approximate method for computing performance-related reliability of gracefully degrading systems

Using existing methods, the computation of performance-related reliability (PRR) of large-scale gracefully degrading systems is very tedious and time consuming. In this paper, the behaviour of such systems is respectively modeled as two types of diffusion processes according to their reconfiguration coverage. If the coverage is 1 (i.e. the reconfiguration is always successful), it is modeled as a regular diffusion. If, on the other hand, the coverage is less than one, it is modeled as diffusion with killing. Kolmogorov backward equations for regular diffusion processes and for diffusions with killing are then applied to compute the PRR. The methods have been applied in several examples, and the results satisfactorily agree with the accurate results.     

固载于SBA-15分子筛中的同双核金属配合物催化剂

合成了3种同双核金属配合物[M2LCl3]Cl(L代表配体三亚乙基四胺,M代表Co,Cu,Cr),采用微波加热法合成了SBA-15分子筛,采用浸渍法将3种同双核金属配合物分别固载在表面官能化的SBA-15分子筛(SBA-15-NH2分子筛)中制得负载型催化剂。傅里叶变换红外光谱、X射线衍射、紫外可见光谱和热分析表征结果表明,同双核金属配合物被固载后,其结构仍保持完整。以环己烷氧化反应为探针反应,考察了[Co2LCl3]Cl/SBA-15-NH2,[Cu2LCl3]Cl/SBA-15-NH2,[Cr2LCl3]Cl/SBA-15-NH2催化剂的活性,环己烷转化率分别为11.0%,49.5%,57.9%;对于[Cr2LCl3]Cl/SBA-15-NH2催化剂,当分别以乙睛、丙酮和冰醋酸为溶剂时,环己烷转化率分别为57.9%,52.1%,34.2%,3次重复实验的环己烷转化率分别为57.9%,47.8%,46.5%,表明该催化剂具有较好的活性和重复使用性。     

食品工厂设计方案多级模糊评价方法的研究

食品工厂设计方案的评价受众多因素影响,采用模糊评价和层次分析法,不仅考虑了所有因素的影响,而且保留了各级评价的全部信息,减少了评价过程中人为因素的影响,提高食品工厂设计方案评价的科学性和准确性.