Thermodynamic modeling of an ammonia–water absorption chiller

This article develops a general thermodynamic framework for the modeling of an irreversible absorption chiller at the design point, with application to a single-stage ammonia–water absorption chiller. Component models of the chiller have been assembled so as to quantify the internal entropy production and thermal conductance (UA) in a thermodynamically rigorous formalism, which is in agreement with the simultaneous heat-and-mass transfer processes occurring within the exchangers. Local thermodynamic balance (viz. energy, entropy, and mass balance) and consistency within the components is respected, in addition to the overall thermodynamic balance as determined by the inlet and outlet states of the components. For the absorbers, Colburn-and-Drew mass transfer equations are incorporated to describe the absorption process. Furthermore, the impact of various irreversibilities on the performance of chiller is also evaluated through the use of a general macroscopic equation.     

Study of rubber oxidation by thermoanalysis

A method using the DSC was utilized whereby the oxidation of natural rubber was studied by adapting the procedures developed by Kissinger, Doyle, and Ozawa for thermoanalysis. Thus oxidative induction time of several hours for a particular rubber sample can be estimated in a relatively short time. Some of the results of this method are compared with those from other established methods, the estimated oxidative induction time showing a good correlation with some of the systems tested. The validity and limitations of this method are discussed.     

A canalicular multispecific organic anion transporter (cMOAT) antisense cDNA enhances drug sensitivity in human hepatic cancer cells

The human cMOAT gene encodes a membrane protein involved in the ATP-dependent transport of hydrophobic compounds. To determine whether cMOAT is associated with drug sensitivity, we transfected an expression vector containing cMOAT antisense cDNA into the HepG2 human hepatic cancer cell line. We observed a reduction in cMOAT protein, as well as an enhanced level of glutathione, in the antisense transfectants. The transfectants displayed an increased sensitivity to cisplatin, vincristine, doxorubicin, and the camptothecin derivatives, (4S)-4,11-diethyl-4-hydroxy-9-[(4-piperidinopiperidino)carbonyl oxy]dione hydrochloride triethydrate and 7-ethyl-10-hydroxycamptothecin, but not to etoposide, 3-[4-amino-2-methyl-5-pyrimidinyl)methyl]-1-(2-chloroethyl)-1-nitrosoure a, 5-fluorouracil, and mitomycin C. Results suggest that cMOAT levels are inversely correlated with those of glutathione, and that cMOAT and its related genes may be involved in the sensitivity of cells to certain anticancer agents.     

The effect of boundary conditions on experimentally measured trabecular strain in the thoracic spine

Vertebral bodies are the primary structural entities of the spine, and trabecular bone is the dominant material from which vertebral bodies are composed. Understanding the mechanical characteristics of vertebral trabecular bone, therefore, is of critical importance in the many clinical conditions that affect the spine. Numerous studies have loaded vertebral bodies to investigate the influence of trabecular bone characteristics on deformation and failure patterns, but the methods of load application have been inconsistent. These differences in the method of load application are a potential confounding factor in the interpretation of the experimental results. We investigated this problem by measuring the distribution of minimum principal strain and maximum shear strain magnitude within 6.35 mm thick samples cut from thoracic spine segments (T8-T10) and loaded to simulate three common experimental configurations. Measurements were made using the texture correlation technique, which extracts deformation patterns from digitized contact radiographs of samples under load. The three loading configurations examined were a three-body construct, a single vertebral body loaded through sectioned intervertebral discs, and polymethylmethacrylate molded directly to the endplates. Results indicate that from both probability and spatial distribution standpoints the best simulation of in vivo loading generates the least uniform strains. Loading through disc remnants or through plastic molded to the endplates causes increasing degrees of strain homogenization. This result has implications not only for the design of experiments involving spinal loading, but also for theories concerning the adaptation of trabecular bone to functional loads.     

Long-term results of preoperative hyperthermo-chemo-radiotherapy (HCR) for patients with esophageal carcinoma invading neighboring structures (T4)

PATIENTS: A total of 180 patients with esophageal carcinoma invading the neighboring structures (T4) were surgically treated by esophagectomy and reconstruction in the Department of Surgery II, Kyushu University from January 1965 to April 1997. Any of these cases with distant node metastasis and demonstrating organ metastasis or a combined resection of adjacent structures were excluded from this study. As a result, twenty-six patients treated with preoperative hyperthermo-chemo-radiotherapy (HCR Group), 39 treated either with preoperative radiotherapy or preoperative chemo-radiotherapy (R or CR Group) and 23 non-treated patients (Non-tx Group) were thus entered in this study. RESULTS: The 3-year survival rates after esophagectomy in HCR Group, R or CR Group and Non-tx Group were 26.5%, 0% and 9%, respectively, while the 5-year survival rate of the HCR group was 15.9%. The group with preoperative HCR thus showed a significantly more favorable outcome than R or CR Group and Non-tx Group. (p < 0.05). DISCUSSION: The significant difference observed in the prognosis was thought to be due to the reinforced effect of local regulation due to hyperthermia. Our data thus suggest that preoperative HCR contributes to the prolonged post-operative survival for carcinoma of the esophagus invading the neighboring structures.     

铜引线键合中影响焊球硬度因素的研究

铜丝球焊由于其经济优势和优越的电气性能近来得到了普及,然而,在引线键合工艺中用铜丝取代金丝面临着一些技术上的挑战。多年来,IC芯片焊盘结构已经逐步适应了金丝球焊。铜在本质上比金硬度高,因此以铜线取代金线便引出了有关硬度的问题。研究了用25．4μm铜丝球焊中与键合机参数有关的铜焊球硬度特性。采用电子打火系统不同的电流和打火时间设置,用5％氢气和95％氮气组成的惰性保护气体形成了一个典型的25．4μm大小的铜焊球,研究了维氏硬度的焊球。用实验设计建立了第一和第二键合参数,进行了无空气焊球基本数据调整。通过改变电子打火系统参数。对硬度特性进行了进一步的测试。典型的键合球的大小和厚度的第一键合响应证实铜键合球的生产实力与电子打火系统的电流和打火时间有关．     

Evolution and stability of 2-mercaptobenzimidazole inhibitor film upon Al alloy 6061

Journal of Applied Electrochemistry - Organic corrosion inhibitors have become competent alternatives to hazardous chrome conversion coatings due to their rapid adsorption over metal surfaces in...     

A Flexi-PEGDA Upconversion Implant for Wireless Brain Photodynamic Therapy

Near-infrared (NIR) activatable upconversion nanoparticles (UCNPs) enable wireless-based phototherapies by converting deep-tissue-penetrating NIR to visible light. UCNPs are therefore ideal as wireless transducers for photodynamic therapy (PDT) of deep-sited tumors. However, the retention of unsequestered UCNPs in tissue with minimal options for removal limits their clinical translation. To address this shortcoming, biocompatible UCNPs implants are developed to deliver upconversion photonic properties in a flexible, optical guide design. To enhance its translatability, the UCNPs implant is constructed with an FDA-approved poly(ethylene glycol) diacrylate (PEGDA) core clad with fluorinated ethylene propylene (FEP). The emission spectrum of the UCNPs implant can be tuned to overlap with the absorption spectra of the clinically relevant photosensitizer, 5-aminolevulinic acid (5-ALA). The UCNPs implant can wirelessly transmit upconverted visible light till 8 cm in length and in a bendable manner even when implanted underneath the skin or scalp. With this system, it is demonstrated that NIR-based chronic PDT is achievable in an untethered and noninvasive manner in a mouse xenograft glioblastoma multiforme (GBM) model. It is postulated that such encapsulated UCNPs implants represent a translational shift for wireless deep-tissue phototherapy by enabling sequestration of UCNPs without compromising wireless deep-tissue light delivery.     

Facile preparation of ultra-low Pt loading graphene-immobilized electrode for methanol oxidation reaction

Pulse current electrodeposition (PCE) technique was used to prepare graphene-supported platinum nanoparticles (GN-PtNPs) electrodes for the methanol electro-oxidation reaction in acidic media. The influences of the PCE parameters (applied current density, concentration of the Pt precursor, and duty cycle) upon the as-prepared GN-PtNPs electrodes for the methanol oxidation reaction (MOR) in terms of catalytic activity and tolerance against poisoning were studied using the Taguchi design of experiment (DOE). The analysis of variance (ANOVA) and signal-to-noise (S/N) ratio analysis provided prediction of optimal electrodeposition conditions to yield GN-PtNPs electrode which give the best MOR performance. The values of confirmatory experiment were demonstrated close to the values predicted using the Taguchi method. Transmission electron microscopy images showed that the Pt crystallites in flower-like structure were deposited evenly on the surface of graphene sheet. The Pt crystallites were predominantly in a zero-valent, metallic Pt state based on the X-ray photoelectron spectroscopy analysis.