Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Earthquake onset detection using spectro-ratio on multi-threshold time–frequency sub-band

Automatic onset detection and picking algorithm has been proposed by applying the spectro-ratio on time–frequency sub-band. The proposed algorithm does not need any parameter settings as it will work on data generated by either short or very broad band seismometers. Our algorithm is applied on local events from Cairo region recorded by three stations of the Egyptian National Seismic Network (ENSN). Maximum standard deviation is observed to be 0.113 s of the corresponding manual picks made by analysts.     

Quasi-optical waveguide-mode converters using a pair of phase correction mirrors

This paper describes a quasi-optical method for the conversion of modes transmitted through highly oversized circular waveguides. A waveguide-mode is radiated once from a waveguide cut in the form of a radiation beam, which is then properly shaped by two curved mirrors and directed back into the waveguide. The curved mirror shapes are iteratively and automatically determined for given propagation distances using the design technique for phase correction mirrors. The proposed method gives favorable results in designing a waveguide expander/reducer, a TE₀₁-TE₀₂ mode converter, and a TE₀₁-HE₁₁ mode converter.     

Comparative study of depth and lateral distributions of electron excitation between scanning ion and scanning electron microscopes

In order to study the contrast difference between scanning ion microscopes (SIM) and scanning electron microscopes (SEM), the depth and lateral distributions of secondary electrons escaped from surfaces of 17 metals with atomic numbers, Z2, of 4-79 were calculated for bombardment with 30 keV Ga ions and for 10 keV electrons. For both projectiles, the excitation depth generally decreased with increasing Z2, while showing the same periodic change as the secondary-electron yield. However, an opposite trend in Z2 dependence between the Ga ion and electron bombardments was calculated with the lateral distribution of secondary electrons escaped from the surface. Except for low Z2 metals, the lateral distribution, which is much narrower for 30 keV Ga ions than for 10 keV electrons, indicates that the spatial resolution of the secondary-electron images is better for SIM than for SEM, if zero-sized probe beams are assumed. Furthermore, the present calculation reveals important effects of electron excitation by recoiled material atoms and reflected electrons on the lateral distribution, as well as the secondary-electron yield, for the Ga ion and electron bombardments, respectively.     

Improvement of Electrical Contact Between TE Material and Ni Electrode Interfaces by Application of a Buffer Layer

A single ??-structure thermoelectric (TE) module based on p-type NaCo₂O₄, n-type Mg₂Si, and Ni electrode was fabricated by the spark plasma sintering (SPS) method. The NaCo₂O₄ powder was synthesized by using a metal?Ccitric acid complex decomposition method. Bulk Mg₂Si prepared by melt quenching was ground into a powder and sieved to particle size of 75???m or less. To obtain a sintered body of NaCo₂O₄ or Mg₂Si, the powder was sintered using SPS. Pressed Ni powder or mixed powder consisting of Ni and SrRuO₃ powder was inserted between these materials and the Ni electrode in order to connect them, and electrical power was passed through the electrodes from the SPS equipment. The open-circuit voltage (V _OC) values of a single module in which TE materials were connected to the Ni electrodes by using pressed Ni powder was 82.7?mV, and the maximum output current (I _max) and maximum output power (P _max) were 212.4?mA and 6.65?mW at ??T?=?470?K, respectively. On the other hand, V _OC of a single module in which TE materials and an Ni electrode were connected with a mixed powder (Ni:SrRuO₃?=?6:4 volume fraction) was 109?mV, and I _max and P _max were 4034?mA and 109?mW at ??T?=?500?K, respectively. These results indicate that the resistance at the interface between the TE materials and the Ni electrode can be decreased and the output power can be increased by application of a buffer layer consisting of Ni and SrRuO₃.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.     

Evaluation of TEM samples of an Mg-Al alloy prepared using FIB milling at the operating voltages of 10 kV and 40 kV

Transmission electron microscopy (TEM) samples of an Mg-Al alloy has been prepared using a Ga-focused ion beam (FIB) milling at two different operating voltages of 10 kV and 40 kV to investigate the influence of the FIB energy on the sample quality. The fine structures of the samples have been studied using a high resolution TEM, and the concentration of the implanted Ga was analysed using an energy dispersive X-ray (EDX) analysis. The result of the TEM observation revealed that point defects were introduced to the sample finally milled at 40 kV but not at 10 kV. However, crystal lattice images and electron diffraction patterns were clearly observed on both the samples. The typical influence of the FIB energy was indicated in the elemental analysis. The relative Ga concentration in the thin sample finally milled at 10 kV was 1.0-2.0 at% that is less than half of 4.0-6.0 at% of the Ga concentration in the sample finally milled at 40 kV. A comparison between the experimental results of the Ga concentration measurement with simulation was also discussed.     

A nondigestible saccharide,fructooligosaccharide, increases the promotive effect of a flavonoid, α‐glucosyl‐isoquercitrin,on glucagon‐like peptide 1 (GLP‐1) secretion in rat intestine and enteroendocrine cells

This study conducted in vivo and in situ experiments with rats to investigate the glucagon‐like peptide‐1 (GLP‐1) secretion in response to oral or ileal administration of α‐glucosyl‐isoquercitrin (20–40 mmol in 2 mL; Q3G), fructooligosaccharides (200 mmol in 2 mL; FOS) and Q3G + FOS. Direct effects on GLP‐1‐producing l ‐cells were also examined by an in vitro study using a murine enteroendocrine cell line, GLUTag. To evaluate the plasma GLP‐1 level, blood samples from jugular cannula for in vivo and portal cannula for in situ experiments were obtained before and after administration of Q3G, FOS, or Q3G + FOS. We found tendencies for increases but transient stimulation of GLP‐1 secretion by Q3G in in vivo and in situ experiments. Although FOS alone did not have any effects, Q3G + FOS enhanced and prolonged high plasma GLP‐1 level in both experiments. In addition, application of Q3G on GLUTag cells stimulated GLP‐1 secretion while FOS enhanced the effect of Q3G. Our results suggest that Q3G + FOS possess the potential for the management or prevention of Type 2 diabetes mellitus (T2DM) by enhancing and prolonging the GLP‐1 secretion via direct stimulation of GLP‐1 producing l ‐cell.     

Distribution of ytterbium (Yb) in cells of Streptomyces sp. YB-1 which can accumulate Yb, and reusability of cells and cell membrane as bioadsorbent for Yb

The cells of Streptomyces sp. YB-1 adsorbed 4-6 mg ytterbium (Yb) per g dry weight. The Yb contents of the cell wall fraction, cell-free extract, and cell membrane fraction were 11%, 2%, and 87%, respectively. The Yb content in the cell membrane fraction was 20-25 mg per g dry weight. The adsorbed Yb could be quantitatively desorbed by treating the cell membrane fraction with 1 mM EDTA and 1 M HCl at 37 degrees C for 4 h. Treatment with 1 M NaOH caused Yb desorption to some extent. Treatments with proteinase K, lysozyme, 0.5% Triton X-100, 0.4% sodium dodecyl sulfate, and 1 M NaCl did not cause Yb desorption. Elemental analysis of Yb-adsorbed materials after removal of proteins and then extraction of lipids from the membrane fraction revealed that the molar ratio of Yb and P in the materials was about 1:1. The cells and the membrane fraction could be used repeatedly as a bioadsorbent for Yb.     

Characterization of a class III chitinase from Vitis vinifera cv. Koshu

A chitinase gene (Chi3K) was cloned from the genomic DNA of Vitis vinifera cv. Koshu. The structural gene comprised 891 by without introns and encoded 297 amino acids. The Chi3K product showed high similarity to the class III chitinase of V. vinifera cv. Pinot noir. Chi3K was expressed using a bacterial expression vector for purification and enzymatic characterization of its gene product. The recombinant chitinase exhibited hydrolytic activity toward glycol chitin and its optimum pH was 4.0. It also inhibited the growth of Botrytis cinerea, which causes grey mold disease in grapes.