An 8.1-ns Column-Access 1.6-Gb/s/pin DDR3 SDRAM With an 8:4 Multiplexed Data-Transfer Scheme

Three circuit techniques for an 8.1-ns column-access 1.6-Gb/s/pin 512-Mb DDR3 SDRAM using 90-nm dual-gate CMOS technology were developed. First, an 8:4 multiplexed data-transfer scheme, which operates in a quasi-4-bit prefetch mode, achieves a 3.17-ns reduction in column-access time, i.e., from 11.3 to 8.13 ns. Second, a dual-clock latency counter reduces standby power by 22% and cycle time from 1.7 to 1.2 ns. Third, a multiple-ODT-merged output buffer enables selection of five effective-resistance values Rtt (20, 30, 40, 60, and 120 Omega) without increasing I/O capacitance. Based on these techniques, 1.6-Gb/s/pin operation with a 1.36-V power supply and a column latency of 7 was accomplished     

A novel spacer‐free panel structure and glass for FEDs

Abstract— A new design for an FED envelope, composed of box‐shaped front glass, sheet‐like rear glass, and metal members, has been devised. This design structure is effective in reducing tensile stress induced by vacuum at the sealing points. Also, a new glass composition, a new physical tempering method, and a lead‐free hermetic sealing material have been developed. As a result, a novel lightweight spacer‐free panel structure for FEDs has been developed by integrating these new technologies. It will assist in maximizing the essential advantages of FED such as high image quality, high reliability, and low cost.     

High‐efficiency light‐collection optics for lamp‐based projection TV

Abstract— A new light‐collection optics has been developed that enhances the luminance of projection TV which use lamps as the light source. The conventional optical system consists of an elliptical reflector and a flat‐surface front glass, but these systems cannot sufficiently collect the beams coming from the light source, and they cause loss in the coupling with the light pipe. To solve this problem, we devised a new optical system through a structure of an aspherical reflector and an aspherical front glass. This new optical system concentrates the beams coming from the light source to a smaller point which improves the coupling efficiency. Thus, we have successfully increased the luminance of the projection TV by approximately 10%. This paper reports the design principles of the new optical system and the results of a prototype experiment.     

Study of local intracellular signals regulating axonal morphogenesis using a microfluidic device

The establishment and maintenance of axonal patterning is crucial for neuronal function. To identify the molecular systems that operate locally to control axonal structure, it is important to manipulate molecular functions in restricted subcellular areas for a long period of time. Microfluidic devices can be powerful tools for such purposes. In this study, we demonstrate the application of a microfluidic device to clarify the function of local Ca²⁺ signals in axons. Membrane depolarization significantly induced axonal branch-extension in cultured cerebellar granule neurons (CGNs). Local application of nifedipine using a polydimethylsiloxane (PDMS)-based microfluidic device demonstrated that Ca²⁺ entry from the axonal region via L-type voltage-dependent calcium channels (L-VDCC) is required for branch extension. Furthermore, we developed a method for locally controlling protein levels by combining genetic techniques and use of a microfluidic culture system. A vector for enhanced green fluorescent protein (EGFP) fused to a destabilizing domain derived from E. coli dihydrofolate reductase (ecDHFR) is introduced in neurons by electroporation. By local application of the DHFR ligand, trimethoprim (TMP) using a microfluidic device, we were able to manipulate differentially the level of fusion protein between axons and somatodendrites. The present study revealed the effectiveness of microfluidic devices to address fundamental biological issues at subcellular levels, and the possibility of their development in combination with molecular techniques.     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

A Single Mutation at the Ferredoxin Binding Site of P450 Vdh Enables Efficient Biocatalytic Production of 25‐Hydroxyvitamin D3

Vitamin D₃ hydroxylase (Vdh) from Pseudonocardia autotrophica is a cytochrome P450 monooxygenase that catalyzes the two‐step hydroxylation of vitamin D₃ (VD₃) to produce 25‐hydroxyvitamin D₃ (25(OH)VD₃) and 1α,25‐dihydroxyvitamin D₃ (1α,25(OH)₂VD₃). These hydroxylated forms of VD₃ are useful as pharmaceuticals for the treatment of conditions associated with VD₃ deficiency and VD₃ metabolic disorder. Herein, we describe the creation of a highly active T107A mutant of Vdh by engineering the putative ferredoxin‐binding site. Crystallographic and kinetic analyses indicate that the T107A mutation results in conformational change from an open to a closed state, thereby increasing the binding affinity with ferredoxin. We also report the efficient biocatalytic synthesis of 25(OH)VD₃, a promising intermediate for the synthesis of various hydroxylated VD₃ derivatives, by using nisin‐treated Rhodococcus erythropolis cells containing Vdh_T107A. The gene‐expression cassette encoding Bacillus megaterium glucose dehydrogenase‐IV was inserted into the R. erythropolis chromosome and expressed to avoid exhaustion of NADH in a cytoplasm during bioconversion. As a result, approximately 573 μg mL^?1 25(OH)VD₃ was successfully produced by a 2 h bioconversion.     

Fabrication of vertically aligned single-walled carbon nanotubes in atmospheric pressure non-thermal plasma CVD

A fabrication technique of high-purity vertically aligned single-walled carbon nanotubes (VA-SWCNTs) using atmospheric pressure plasma enhanced chemical vapor deposition is presented. Although densely mono-dispersed Fe-Co catalysts of a few nanometers is primarily responsible for VA-SWCNT growth, carbon precipitation was virtually absent in the thermal CVD regime at 700 °C. On the other hand, high-purity VA-SWCNTs without measurable defects were grown at 4 μm min⁻¹ by applying atmospheric pressure radio-frequency discharge (APRFD) which has been previously developed for this purpose. The results proved that cathodic ion sheath adjacent to the substrates, where a large potential drop exists, also plays an essential role for the controlled growth of SWCNTs, while ion damage to the VA-SWCNTs is inherently avoided due to high collision frequency among molecules in atmospheric pressure. Operation regime of APRFD and tentative reaction mechanisms for VA-SWCNT growth are discussed along with optical emission spectroscopy of near substrate region.     

An energy trading system with consideration of CO2 emissions

Abatement of CO₂ emission is one of the most important issues in the 21st century regarding preservation of the earth environment. This paper addresses a utility operations planning problem for distributed energy management systems (DEMSs), where we are to obtain optimal plans that minimize both costs and CO₂ emissions. A DEMS consists of multiple entities that seek their own economic profits. In this paper, we give a mathematical formulation of the utility operations planning problem for each entity, and propose an energy trading market, which utlizes a multi‐attribute auction protocol in order to deal with both a price and a CO₂ emission rate. Experimental results show that collaboration among entities through the market provides a more profitable plan for each entity and abatement of CO₂ emission is also achieved. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(4): 54–63, 2008; Published online in Wiley InterScience ( www.interscience.wiley. com ). DOI 10.1002/eej.20418     

Direct-linked-type frequency changer based on DC-clamped bilateralswitching circuit topology

This paper describes a direct-linked-type frequency changer (DLT-FC) proposed by the authors. The DLT-FC is a converter circuit with a new configuration for direct frequency change. The DLT-FC does not require a DC-link circuit, nor bilateral switches. In addition, DC snubber circuits can be applied without the need for a regenerative circuit of snubber energy. Therefore, the DLT-FC can be designed to be compact and lightweight, and have a long life. The authors made a prototype of the DLT-FC and experimentally checked its operation. The results indicate that the performance of the DLT-FC makes it suitable for industrial use