A web-based e-learning system for increasing study efficiency by stimulating learner’s motivation

Due to the opportunities provided by the Internet, more and more people are taking advantage of distance learning courses and during the last few years enormous research efforts have been dedicated to the development of distance learning systems. So far, many e-learning systems are proposed and used practically. However, in these systems the e-learning completion rate is about 30%. One of the reasons is the low study desire when the learner studies the learning materials. In this research, we propose an interactive Web-based e-learning system. The purpose of our system is to increase the e-learning completion rate by stimulating learner’s motivation. The proposed system has three subsystems: the learning subsystem, learner support subsystem, and teacher support subsystem. The learning subsystem improves the learner’s study desire. The learner support subsystem supports the learner during the study, and the teacher support subsystem supports the teacher to get the learner’s study state. To evaluate the proposed system, we developed several experiments and surveys. By using new features such as: display of learner’s study history, change of interface color, encourage function, ranking function, self-determination of the study materials, and grouping of learners, the proposed system can increase the learning efficiency.

Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.     

Observation of the intrinsic pinning of a magnetic domain wall in a ferromagnetic nanowire

The spin transfer torque is essential for electrical magnetization switching. When a magnetic domain wall is driven by an electric current through an adiabatic spin torque, the theory predicts a threshold current even for a perfect wire without any extrinsic pinning. The experimental confirmation of this 'intrinsic pinning', however, has long been missing. Here, we give evidence that this intrinsic pinning determines the threshold, and thus that the adiabatic spin torque dominates the domain wall motion in a perpendicularly magnetized Co/Ni nanowire. The intrinsic nature manifests itself both in the field-independent threshold current and in the presence of its minimum on tuning the wire width. The demonstrated domain wall motion purely due to the adiabatic spin torque will serve to achieve robust operation and low energy consumption in spintronic devices.     

X-ray CCD calibration system using fluorescent lines

We have developed a CCD calibration system using fluorescent X-ray lines with energies ranging from 1.49 keV (Al K) to 11.2 keV (Se K). The absolute X-ray flux is calibrated by a gas proportional counter, while the emerging spectra are monitored by solid-state silicon detectors. In order to suppress contaminating X-rays in the fluorescence spectra, mechanical collimators were set in the X-ray beam line, high-purity targets for fluorescent lines were used, and band-pass filters were put on the X-ray beam line. As for the purity of the fluorescent X-rays, the typical purity achieved was 98%.     

Study on adsorption refrigeration cycle utilizing activated carbon fibers. Part 2. Cycle performance evaluation

Thermal heat driven adsorption systems have been gained considerable attention on the recent energy utilization trend. However, the drawbacks of these adsorption systems are their poor performance. It is urgently necessary to improve the system performance of the adsorption cycles. There are two major ways for the system performance improvement. One is to develop new adsorbent material well suited to low temperature heat regeneration. The other is to enhance heat and mass transfer in the adsorber/desorber heat exchanger. The objective of the paper is to investigate the system performance of an adsorption cycle. The cycle utilizes activated carbon fiber (ACF)/methanol as adsorbent/refrigerant pair. In this paper, specific cooling effect SCE and COP of the system are numerically evaluated from the adsorption equilibrium theory with different hot, cooling and chilled fluid inlet temperatures. It is confirmed that the influences of hot, cooling and chilled fluid inlet temperatures on the system performance are qualitatively similar to those of silica gel/water pair. Even though, the driving temperature levels of ACF/methanol and silica gel/water are different. There is an optimum condition for COP to reach at maximum for ACF/methanol pair. Particularly, the ACF/methanol system shows better performance with lower chilled fluid inlet temperature between −20 and 20 °C.     

Optical study of charge dynamics along thec-axis in high-Tc superconductors

Comparing the optical spectra withEc for typical high-T _c superconducting cuprates, we discuss the charge dynamics along thec-axis. The plasma energy or the mass anisotropic factorm _* ^c //m _* ^b is one of the key parameters determining the spectrum forEc. In Bi₂Sr₂CaCu₂O₈ and La_2–x Sr _x CuO₄ with a largem _* ^c /m _* ^b , the plasma energy is smaller than the superconducting gap energy, and thus the supercurrent along thec-axis is a kind of Josephson current flowing through insulating layers such as the BiO layers. On the other hand, in YBa₂Cu₃O₇ with a smallm _* ^c /m _* ^a , it seems that the coherent supercurrent flows along thec-axis. Although the spectrum forEc strongly depends on samples, presumably due to the difference in the hole concentration, a clear anisotropy between theab- and thec-directions is observed in the characteristics energy scales such as the plasma energy as well as the reflectivity knee energy.     

An Iron Refractory Phenotype in Obese Adipose Tissue Macrophages Leads to Adipocyte Iron Overload

Adipocyte iron overload is a maladaptation associated with obesity and insulin resistance. The objective of the current study was to determine whether and how adipose tissue macrophages (ATMs) regulate adipocyte iron concentrations and whether this is impacted by obesity. Using bone marrow-derived macrophages (BMDMs) polarized to M0, M1, M2, or metabolically activated (MMe) phenotypes, we showed that MMe BMDMs and ATMs from obese mice have reduced expression of several iron-related proteins. Furthermore, the bioenergetic response to iron in obese ATMs was hampered. ATMs from iron-injected lean mice increased their glycolytic and respiratory capacities, thus maintaining metabolic flexibility, while ATMs from obese mice did not. Using an isotope-based system, we found that iron exchange between BMDMs and adipocytes was regulated by macrophage phenotype. At the end of the co-culture, MMe macrophages transferred and received more iron from adipocytes than M0, M1, and M2 macrophages. This culminated in a decrease in total iron in MMe macrophages and an increase in total iron in adipocytes compared with M2 macrophages. Taken together, in the MMe condition, the redistribution of iron is biased toward macrophage iron deficiency and simultaneous adipocyte iron overload. These data suggest that obesity changes the communication of iron between adipocytes and macrophages and that rectifying this iron communication channel may be a novel therapeutic target to alleviate insulin resistance.     

IGCC系统中空气气化炉与氧气气化炉的对比研究

目前国内对IGCC的研究形成一股热潮,发表了不少研究结果和文章,但都集中在纯氧气流床气化工艺。日本三菱公司近二十年来致力于空气气化IGCC系统的研究,其示范电厂将于2007年投运,但国内对这方面的信息和了解不多。本文基于文献和作者对开发空气气化IGCC系统的三菱长崎研究所的访问和调研,采用Aspen Plus软件,对此系统作了详细分析,并与Shell气化炉和IGCC系统作了对比,得出了一些有益的结论。     

Room temperature continuous-wave operation of GaInNAs/GaAs VCSELsgrown by chemical beam epitaxy with output power exceeding 1 mW

The authors present a near 1200 nm wavelength vertical-cavity surface-emitting laser (VCSEL) the active region of which is formed by GaInNAs/GaAs quantum wells grown by chemical beam epitaxy. Room temperature continuous-wave operation has been demonstrated with a high slope efficiency of 0.23 W/A, a high output power of over 1.0 mW, and a singlemode output power of 0.34 mW. The fabricated devices with different aperture sizes show low threshold currents of 1.2-2.1 mA and a record low threshold current density of 2.6 kA/cm² in GaInNAs VCSELs     

Kinetic arrest behavior in martensitic transformation of NiCoMnSn metamagnetic shape memory alloy

High-field magnetic measurements were carried out in order to investigate behaviors of field-induced reverse martensitic transformation and kinetic arrest of NiCoMnSn metamagnetic shape memory alloy. In the thermomagnetization curves, it was confirmed that the reverse martensitic transformation temperature decreases 67 K by applying magnetic field of 5 T, while in the magnetic field cooling process under 5 T, martensitic transformation does not occur down to low temperatures. Equilibrium magnetic field, defined from the critical magnetic fields of the metamagnetic evidence in the magnetization curves, exhibits almost constant below about 100 K, suggesting that the entropy change becomes zero, which is considered to cause kinetic arrest behavior.