Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Capability of Utilizing CYP3A5 Polymorphisms to Predict Therapeutic Dosage of Tacrolimus at Early Stage Post-Renal Transplantation

While CYP3A5 polymorphisms are used to predict the initial dosage of tacrolimus therapy, the predictive capability of genetic information for dosing at early stage post-renal transplantation is unknown. We investigated the influence of polymorphisms over time. An initial oral dose of modified-release once-daily tacrolimus formulation (0.20 mg/kg) was administered to 50 Japanese renal transplant patients every 24 h. Stepwise multiple linear regression analysis for tacrolimus dosing was performed each week to determine the effect of patient clinical characteristics. The dose-adjusted trough concentration was approximately 70% higher for patients with the CYP3A5*3/*3 than patients with the CYP3A5*1 allele before the second pre-transplantation tacrolimus dose (0.97 (0.78–1.17) vs. 0.59 (0.45–0.87) ng/mL/mg; p < 0.001). The contribution of genetic factors (CYP3A5*1 or *3) for tacrolimus dosing showed increased variation from Day 14 to Day 28 after transplantation: 7.2%, 18.4% and 19.5% on Days 14, 21 and 28, respectively. The influence of CYP3A5 polymorphisms on the tacrolimus maintenance dosage became evident after Day 14 post-transplantation, although the tacrolimus dosage was determined based only on patient body weight for the first three days after surgery. Tacrolimus dosage starting with the initial administration should be individualized using the CYP3A5 genotype information.     

Energy value and digestibility of dietary oil containing mainly 1,3-diacylglycerol are similar to those of triacylglycerol

Diacylglycerol (DAG) is a component of various vegetable oils. Approximately 70% of the DAG in edible oils are in the configuration of 1,3-DAG. We recently showed that long-term ingestion of dietary oil containing mainly 1,3-DAG reduces body fat accumulation in humans as compared to triacylglycerol (TAG) oil with a similar fatty acid composition. As the first step to elucidate the mechanism for this result, we examined the difference in the bioavailabilities of both oils by measuring food energy values and digestibilities in rats. Energy values of the DAG oil and the TAG oil, measured by bomb calorimeter, were 38.9 and 39.6 kJ/g, respectively. Apparent digestibility expressed according to the formula: (absorbed) x (ingested)⁻¹x100=(ingested—excreted in feces)x(ingested)⁻¹x100 for the DAG oil and the TAG oil were 96.3±0.4 and 96.3±0.3% (mean±SEM), respectively. The similarity in the bioavailabilities of both oils supports the hypothesis that the reduced fat accumulation by dietary DAG is caused by the different metabolic fates after the absorption into the gastrointestinal epithelial cells.     

Preparation of sharp-melting hard palm midfraction and its use as hard butter in chocolate

Preparation of hard palm midfractions (PMF) and its use as a cocoa butter equivalent ingredient were studied. Hard PMF is obtained by multistep fractionation of palm oil involving dry fractionation (DF) and/or solvent fractionation (SF), usually using hexane or acetone. From our experience, in acetone, a polar solvent, symmetrical 1,3-disaturated triacylglycerols tend to selectively crystallize more than nonsymmetrical 1,2- or 2,3-disaturated triacylglycerols, making it suitable for obtaining the solid midfraction. Unfortunately, triacylglycerols are very soluble in hexane, and temperatures at least 15 degrees lower than those required for acetone must be used for equivalent crystal yields. On the other hand, DF is a less expensive and safer process. Thus, multistep fractionation combining DF and SF using acetone was developed to achieve sufficient removal of high-melting components, and further enrichment of 1,3-dipalmitoyl-2-oleoylglycerol and the hard PMF was obtained by triple-step fractionation of palm olein or double-step fractionation of soft PMF. Compared to conventional hard PMF, this hard PMF had a steeper melting curve and better snapping and sharp-melting qualities when used in chocolate. Heat resistance of the hard PMF chocolate was similar to the conventional hard PMF chocolate, and its bloom resistance could be improved by adding polyglycerol fatty acid esters.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Oral Secretions Affect HIPVs Induced by Generalist (<Emphasis Type="Italic">Mythimna loreyi</Emphasis>) and Specialist (<Emphasis Type="Italic">Parnara guttata</Emphasis>) Herbivores in Rice

Plants synthesize variable mixtures of herbivore-induced plant volatiles (HIPVs) as part of their evolutionary conserved defense. To elucidate the impact of chewing herbivores with different level of adaptation on HIPV profiles in rice, we measured HIPVs released from rice seedlings challenged by either the generalist herbivore Mythimna loreyi (MYL) or the specialist Parnara guttata (PAG). Both herbivores markedly elicited the emission of HIPVs, mainly on the second and third days after attack compared to control plants. In addition, side-by-side HIPV comparisons using MYL and PAG caterpillars revealed that generalist feeding induced comparably more HIPVs relative to specialist, particularly on day two as highlighted by multivariate analysis (PLS-DA) of emitted HIPVs, and further confirmed in mimicked herbivory experiments. Here, mechanically wounded plants treated with water (WW) released more VOCs than untreated controls, and on top of this, oral secretions (OS) from both herbivores showed differential effects on volatile emissions from the wounded plants. Similar to actual herbivory, MYL OS promoted higher amounts of HIPVs relative to PAG OS, thus supporting disparate induction of rice indirect defenses in response to generalist and specialist herbivores, which could be due to the differential composition of their OS. (196 words).     

Size Measurement of Polystyrene Latex Particles Larger than 1 Micrometer using a Long Differential Mobility Analyzer

We describe a newly constructed annular-type differential mobility analyzer (DMA) with an effective electrode length of 60 cm, which is longer than that of our original DMA (40 cm length). This long DMA was developed to extend the classification size of particles measuring up to 1.5 μm. As an application of this DMA, the mean diameters and standard deviations were determined for six samples of monodisperse polystyrene latex (PSL) particles ranging from 0.94 to 1.27 μm in nominal diameter. These PSL particles suspended in double-distilled water were aerosolized by a glass nebulizer and then introduced into the DMA. The mean diameters and standard deviations of these PSL particles were calculated by Ehara's method and compared with the nominal diameters and uncertainties. There was good correlation between the nominal diameters of these samples—particularly for recently certified samples—and the measured diameters. Classification of aerosol particles more than 1 micrometer in diameter using this DMA will be useful for many purposes.     

Simple,Mild, and Practical Esterification,Thioesterification, and Amide Formation Utilizing p‐Toluenesulfonyl Chloride and N‐Methylimidazole

We have developed an efficient method for the esterification or thioesterification of equimolar amounts of carboxylic acids and alcohols or thiols using a novel reagent, p‐toluenesulfonyl chloride (TsCl) together with N‐methylimidazole. The present method is simple, mild, and reactive, uses readily available and economical reagents. The choice of amine is critical for the present method. The amine, N‐methylimidazole, has two roles: (i) as an HCl scavenger for the initial smooth generation of mixed anhydrides between carboxylic acids and TsCl and (ii) successive formation of highly reactive ammonium intermediates from mixed anhydrides. This method could be applied to various types of carboxylic acids, alcohols, and thiols: a) several functionalities were tolerated; b) two N‐Cbz amino acids were smoothly esterified without racemization; and c) the labile 1β‐methylcarbapenem key intermediate and a pyrethroid insecticide, prallethrin, were successfully prepared. The related amide formation between carboxylic acids and primary or secondary amines was also performed. The proposed reaction mechanism involves a novel method for producing the reactive acylammonium intermediates. The production of these intermediates was rationally supported by a careful ¹H NMR monitoring study.     

An experimental study of flow and heat transfer of supercritical carbon dioxide in multi-port mini channels under cooling conditions

This paper presents the fluid flow and heat transfer characteristics of supercritical CO₂ in a horizontal multi-port extruded aluminum test section consisting of 10 circular channels with an inner diameter of 1.31 mm. Both local and average pressure drop and heat transfer coefficients were measured as CO₂ was cooled in the multi-port circular channels with pressures ranging from 7.4 to 8.5 MPa, inlet fluid temperatures ranging from 22 to , and mass velocity ranging from 113.7 to 418.6 kg/m² s. The results indicate that the operating pressure, the mass velocity and the temperature of CO₂ had significant effects on fluid flow and heat transfer characteristics. The pressure drop and the average heat transfer coefficient increased greatly with increasing the average temperatures of CO₂ in the near-critical region; the average heat transfer coefficient attained a peak value near the corresponding pseudocritical temperature; and the maximum heat transfer coefficient decreased as the pressure increased. Both the pressure drop and the heat transfer coefficient increased with the mass velocity, but decreased with the operating pressure. The measured average heat transfer coefficients were compared with the experimental data reported in the literatures and a large discrepancy was observed. Based on the experimental data collected in the present work, a new correlation was developed for forced convection of supercritical CO₂ in horizontal multi-port mini channels under cooling conditions.