射流泵流场数值模拟的罚有限元法

本文采用罚函数有限元法,在标准k-ε双方程紊流模型下,对射流泵内部轴对称流场进行了数值模拟,得到了较全面的参数分布,特别是全场的压力分布,为射流泵的理论研究和优化设计提供了可靠的依据。给出的算例说明了与文献提供的实验结果基本一致。计算方法简捷,有较大的实用价值。     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

Improving Thermal Stability of BaMgAl10O17:Eu Phosphor

Heterogeneous precipitation method was used to prepared surface coating on self-made BaMgAl10O17:Eu phosphor. Results illustrate that the coating film can be silicon dioxide in amorphous state with 50 nm in thickness. Photoluminescence results indicate that the coating layer presents an observable improved effect on the enhancement of thermal stability. When baked at 600 ℃ for 1 h, the luminance of coated BAM keeps at 92% higher than that of uncoated BAM by 23%. This protective effect can be attributed to the high compact degree and uniformity of this amorphous SiO2 coating film which is served as a diffusion block layer to inbreak oxygen atom, thus releases the oxidation extent of Eu2 effectively.     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

130t RH脱碳模型建立及超低碳钢处理工艺优化

建立了RH真空处理脱碳数学模型，并通过130t RH工业试验结果对此数学模型加以验证。根据模型分析了[C]0、[O]0、真空度、提升气体流量等对脱碳效果的影响，据此优化了处理工艺，取得较好的效果。     

��չ����Ȼ��Ϊԭ�ϵ�ȼ�ϵ������

研究燃料汽车及其氢源系统是当今国内外能源工业与汽车工业的共同课题，而优选制氢能源则是这一课题的关键。章介绍了利用能源、经济、环境(EEE)——生命周期评估(LCA)这一综合评估方法，针对以天然气、煤或石油作为制氢能源的多种燃料电池氢源供应方式以及配套的燃料电池汽车系统，从经济性、能源利用效率和环境影响三个方面进行了生命周期清单分析和EEE综合评价。结果显示：天然气作为发展燃料电池汽车氢源的一次能源，具有氢制取技术路线多样化、经济上竞争力强、能源利用效率高和环境效益好等诸多优势，应为燃料电池汽车的首选制氢能源。对这一评估模型的敏感性分析显示，即使在天然气价格波动较大时，天然气制甲醇--甲醇车载重整车和天然气制氢--纯氢车这两个方案仍然最具优势。     

一种精密温度控制仪

采用精密温度补偿及在传统PID调节基础上运用模糊控制运算 ,实现以单片机为基础开发研制的精密温度控制仪 ,并输出时间开关量信号和 4～ 2 0mA标准电流信号 ,为闭环控制及温度值远传提供依据。     

大水矿床残矿开采技术研究

莱芜铁矿业庄矿区为一大水矿床，曾采用预留护顶矿层隔水进路采矿法开采，—25m中段以上矿体已呈蜂窝状。为回收该部份残矿体，针对该矿体的具体特征，采用有限元法模拟采矿开挖步骤，并对采场结构参数进行优化；改进凿岩爆破工艺，改善了爆破效果，达到了安全、经济回采的目的。可为类似矿床开采提供借鉴。     

Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

高能球磨FeCo+MnO的结构与磁性研究

用高能球磨采用两种方案制备了FeCo MnO体系,并用X射线衍射和振动样品磁强计对其结构和磁性质做了分析.发现采用直接氧化Mn而得到MnO的方法,所得体系的MnO较纯;而通过分解MnCO3得到MnO的体系,MnO纯度较低,有较多Mn3O4杂质,两种方法制备的FeCo MnO体系的矫顽力和剩磁比都比单纯FeCo体系的增加很多,且前一种方法比后一种方法制备的FeCo MnO体系的矫顽力和剩磁比较大.然后研究了球磨时间及退火处理对FeCo MnO体系矫顽力及剩磁比的影响,发现球磨时间为120h体系的矫顽力和剩磁比最大;经过退火处理后,体系的矫顽力和剩磁比都有较大幅度的增加.