Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Supercritical fluid extraction of fungal oil using CO2, N2O,CHF3 and SF6

The extraction of oil from fungi (Mortierella ramanniana var.angulispora) was studied using carbon dioxide (CO₂), nitrous oxide (N₂O), trifluoromethane (CHF₃) and sulfur hexafluoride (SF₆) under supercritical conditions. The oil solubility was highest in SC-N₂O followed by SC-CO₂, while both SC-CHF₃ and SC-SF₆ showed poorer solvent power. The recorded oil solubilities at 333 K and 24.5 MPa were 2.3 wt% in N₂O, 0.48 wt% in CO₂, 0.0099 wt% in CHF₃ and 0.0012 wt% in SF₆. The oil solubilities in SC-N₂O and SC-CO₂ were measured over the pressure range 15.7–29.4 MPa and at temperatures ranging from 313–353 K. N₂O always showed greater solvent power than did CO₂ at the same temperature and pressure. The solvent power of a supercritical fluid increases with density at a given temperature, and increases with temperature at constant density. The change in neutral lipid composition of the extracted oil with the extraction ratio was measured. Free fatty acids or diglycerides were extracted more easily than triglycerides or sterol esters. The change in fatty acid composition was also measured. The proportion of γ-linolenic acid in the extract remained constant throughout the extraction.     

Sterols,methylsterols, and triterpene alcohols in threeTheaceae and some other vegetable oils

The unsaponifiables from threeTheaceae (Camellia japonica L.,Camellia Sasanqua Thunb., andThea sinensis L.) oils and alfalfa, garden balsam, and spinach seed oils and shea fat were separated into four fractions: sterols, 4-methylsterols, triterpene alcohols, and less polar compounds by thin layer chromatography. While the sterol fraction was the major one for the unsaponifiables from alfalfa and spinach seed oils, the triterpene alcohol fraction was predominant for the unsaponifiables from all other oils. The sterol, 4-methylsterol, and triterpene alcohol fractions were analyzed by gas chromatography. All the sterol fractions were alike in their compositions, consisting exclusively of Δ⁷-sterols, such as α-spinasterol and Δ⁷-stigmastenol as predominant components together with Δ⁷-avenasterol and 24-methylcholest-7-enol. Obtusifoliol, gramisterol (occasionally accompanied with cycloeucalenol), and citrostadienol, together with several other unidentified components, were found in the 4-methylsterol fractions from all of the oils except shea fat. The 4-methylsterol fraction from shea fat showed a characteristic composition containing a large proportion of unidentified components which had relative retention time greater than that of citrostadienol, while no citrostadienol was detected. β-Amyrin, lupeol, and butyospermol were major components of the triterpene alcohol fractions from most of the oils, but the fraction from spinach seed oil contained cycloartenol and 24-methylene-cycloartanol as predominant components. There is a close similarity in the compositions of unsaponifiables (sterols, 4-methylsterols, and triterpene alcohols) of the threeTheaceae oils. Two sterols, α-spinasterol and Δ⁷-stigmastenol, and five triterpene alcohols were isolated from tea seed oil. Moreover, five unidentified components beside parkeol, butyrospermol, α-amyrin, and lupeol were isolated from the triterpene alcohol fraction of shea fat.     

Oxidation kinetics for <Emphasis Type="Italic">cis</Emphasis>-9,<Emphasis Type="Italic">trans</Emphasis>-11 and <Emphasis Type="Italic">trans</Emphasis>-10,<Emphasis Type="Italic">cis</Emphasis>-12 isomers of CLA

The autoxidation processes of the cis-9,trans-11 (c9,t11) and trans-10,cis-12 (t10,c12) isomers of CLA were separately observed at ca. 0% RH and different temperatures. The t10,c12 CLA oxidized faster than the c9,t11 isomer at all tested temperatures. The first half of the oxidation process of t10,c12 CLA obeyed an autocatalytic-type rate expression, but the latter half followed first-order kinetics. On the other hand, the entire oxidation process of c9,t11 CLA could be expressed by the autocatalytic-type rate expression. The apparent activation energies and frequency factors for the autoxidation of the isomers were estimated from the rate constants obtained at various temperatures based on the Arrhenius equation. The apparent activation energies for the CLA isomers were greater than those for the nonconjugated n−6 and n−3 PUFA or their esters. However, the enthalpyentropy compensation held during the autoxidation of both the CLA and PUFA. This suggested that the autoxidation mechanisms for the CLA and PUFA were essentially the same.     

Regiospecific analysis by ethanolysis of oil with immobilized <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase

A mixture of oil/ethanol (1∶3, w/w) was shaken at 30°C with 4% immobilized Candida antarctica lipase by weight of the reaction mixture. The reaction regiospecifically converted FA at the 1- and 3-positions to FA ethyl esters, and the lipase acted on C₁₄−C₂₄ FA to a similar degree. The content of 2-MAG reached a maximum after 4 h; the content was 28–29 mol% based on the total amount of FA in the reaction mixture at 59–69% ethanolysis. Only 2-MAG were present in the reaction mixture during the first 4 h, and 1(3)-MAG were detected after 7 h. After removal of ethanol from the 4-h reaction mixture by evaporation, 2-MAG were fractionated by silica gel column chromatography. The contents of FA in the 2-MAG obtained by ethanolysis of several oils coincided well with FA compositions at the 2-position, which was analyzed by Grignard degradation. It was shown that ethanolysis of oil with C. antarctica lipase can be applied to analysis of FA composition at the 2-position in TAG.     

Preparation of regioisomers of structured TAG consisting of one mole of CLA and two moles of caprylic acid

TAG (MLM) with medium-chain FA (MCFA) at the 1,3-positions and long-chain FA (LCFA) at the 2-position, and TAG (LMM) with LCFA at the 1(3)-position and MCFA at 2,3(1)-positions are a pair of TAG regioisomers. Large-scale preparation of the two TAG regioisomers was attempted. A commercially available FFA mixture (FFA-CLA) containing 9-cis, 11-trans (9c, 11t)- and 10t,12c-CLA was selected as LCFA, and caprylic acid (C₈FA) was selected as MCFA. The MLM isomer was synthesized by acidolysis of acyglycerols (AG) containing two CLA isomers with C₈FA: A mixture of AG-CLA/C₈ FA (1∶10, mol/mol) and 4 wt% immobilized Rhizomucor miehei lipase was agitated at 30°C for 72 h. The ratio of MLM to total AG was 51.1 wt%. Meanwhile, LMM isomer was synthesized by acidolysis of tricaprylin with FFA-CLA: A mixture of tricaprylin/FFA-CLA (1∶2, mol/mol) and 4 wt% immobilized R. miehei lipase was agitated at 30°C for 24 h. The ratio of LMM to total AG was 51.8 wt%. MLM and LMM were purified from 1,968 and 813 g reaction mixtures by stepwise short-path distillation, respectively. Consequently, MLM was purified to 92.3% with 49.1% recovery, and LMM was purified to 93.2% with 52.3% recovery. Regiospecific analyses of MLM and LMM indicated that the 2-positions of MLM and LMM were 95.1 mol% LCFA and 98.3 mol% C₈ FA, respectively. The results showed that a process comprising lipase reaction and short-path distillation is effective for large-scale preparation of high-purity regiospecific TAG isomers.     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Lingual Epithelial Stem Cells and Organoid Culture of Them

As tongue cancer is one of the major malignant cancers in the world, understanding the mechanism of maintenance of lingual epithelial tissue, which is known to be the origin of tongue cancer, is unquestionably important. However, the actual stem cells that are responsible for the long-term maintenance of the lingual epithelium have not been identified. Moreover, a simple and convenient culture method for lingual epithelial stem cells has not yet been established. Recently, we have shown that Bmi1-positive cells, residing at the second or third layer of the epithelial cell layer at the base of the interpapillary pit (IPP), were slow-cycling and could supply keratinized epithelial cells for over one year, indicating that Bmi1-positive cells are long-term lingual epithelial stem cells. In addition, we have developed a novel lingual epithelium organoid culture system using a three-dimensional matrix and growth factors. Here, we discuss current progress in the identification of lingual stem cells and future applications of the lingual culture system for studying the regulatory mechanisms of the lingual epithelium and for regenerative medicine.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

A three-dimensional soil–water coupled FE analysis of hollow cylinder test concerning non-uniform deformation

The hollow cylinder shear test is somewhat controversial due to its non-uniform stresses and strains, and has been analyzed by simple theoretical methods and two-dimensional FE calculations. In this paper, the hollow cylinder test under strain control was carried out numerically by treating the specimen as a three-dimensional initial-boundary value problem considering the inertial forces. At first, besides the known nonuniform strain, the non-uniformities of excess pore water pressure and overconsolidation ratio have been shown to benefit from a soil–water coupled analysis that employs the SYS Cam-clay model. Then, the influence of the specimen geometries, including wall thicknesses, heights and outer diameters on the non-uniformity was investigated sequentially. A new method for evaluating non-uniformity was proposed, which is suitable for the three-dimensional analysis. The response under a uniform deformation field, which is indicated by “the perfect path”, was presented to draw a comparison with the apparent behaviors, with non-uniformities taken into consideration. It should be noted that there is a critical height to prevent failure at the specimen ends according to the apparent behavior. Finally, the torque-controlled experiment indicated that 4 ribs could not transfer the torque reliably while 6 or 8 ribs were feasible.