Evaluating a behavioral demand response trial in Japan: evidence from the summer of 2013

This paper presents results from a behavioral demand response trial targeted to both grid and residential peak hours, in which weekly feedback via paper-based reports, real-time feedback via an in-home display, 30-minute tiered rate, and email prompts are adopted to almost 230 residential customers of a condominium in Funabashi, a city located in Greater Tokyo. Through a randomized experiment, we find that the peak saving impact during grid peak hours (1–4 pm, weekdays only) was 11.6 %, given that all the four interventions provided all at once. In addition, the results show that the variation in peak saving effects by household characteristics exists, and the variation differs among packages of peak saving interventions. Furthermore, we analyzed how much informational elements in weekly reports are considered as useful by residential customers. These results suggest that feedback-based approaches for peak saving can promote households’ energy conservation behavior.     

Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels

We investigate deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn specimens of type 316 stainless steel. Deformation-induced martensite preferentially nucleates at the twin boundary between the austenite matrix and a deformation twin. In the cold-rolled specimen, martensite formed at the twin boundary has a Kurdjumov–Sachs (K–S) relationship with both the austenite matrix and the deformation twin (“double K–S relationship”). In the cold-drawn specimen, two kinds of deformation twins with different twin planes are typically formed, and therefore deformation-induced martensites are formed where the deformation twin boundaries intersect: martensite thus has an imperfect “triple K–S relationship” with the austenite matrix and the two deformation twins. The complicated crystallographic orientation relationship between austenite and martensite grains strongly restricts the formation of some variants of deformation-induced martensites. Because of the difference in number of nucleation sites in the cold-drawn and cold-rolled specimens, martensitic transformation is more enhanced in the former than in the latter.     

Convergence of the second eigenfunction in Monte Carlo power iteration

The conditions of convergence in a modified Monte Carlo power iteration method to generate the eigenfunction with the second largest criticality eigenvalue, which was originally proposed by Booth, have been defined with a different approach. In this work, the first and second eigenvectors composed of two volume-integrated fission source intensities defined in two-partitioned regions are used for deriving the convergence conditions. The conditions of convergence as shown by Booth are found to be true in the limit of a small amplitude of the first eigenfunction. Following the method that uses two estimates of the second eigenvalue defined in two-partitioned regions, a new method for removing the fundamental mode eigenfunction from the fission source distributions has been developed. Because of the explicit removal of the first eigenfunction, the validity of this method is convincing as a technique for obtaining the second eigenfunction. Although this method needs the first eigenfunction and eigenvalue, and the subtraction of the first eigenfunction from the fission source distribution, it has the advantage that the adjoint mode calculation which is in general difficult for continuous energy Monte Carlo codes is not required.     

Calcium oxide/carbon dioxide reactivity in a packed bed reactor of a chemical heat pump for high-temperature gas reactors

The thermal performance of a chemical heat pump that uses a calcium oxide/carbon dioxide reaction system was discussed as a heat storage system for utilizing heat output from high temperature gas reactors (HTGR). Calcium oxide/carbon dioxide reactivity for the heat pump was measured using a packed bed reactor containing 1.0 kg of reactant. The reactor was capable of storing heat at 900 °C by decarbonation of calcium carbonate and generating up to 997 °C by carbonation of calcium oxide. The amount of stored heat in the reactor was 800–900 kJ kg⁻¹. The output temperature of the reactor could be controlled by regulating the carbonation pressure. The thermal storage performance of the reactor was superior to that of conventional sensible heat storage systems. A heat pump using this CaO/CO₂ reactor is expected to contribute to thermal load leveling and to realize highly efficient utilization of HTGR output due to the high heat storage density and high-quality temperature output of the heat pump.     

Comparison of soyasaponin and isoflavone contents between genetically modified (GM) and non-GM soybeans

Soyasaponins and isoflavones are main secondary metabolites in soybeans. In this report we compared the content of secondary metabolites between genetically modified (GM) and non-GM soybeans. Six cultivars/lines of GM and six cultivars/lines of non-GM soybeans were extracted with methanol. Each extract was partitioned with aqueous methanol and hexane and the aqueous methanol fraction was partially purified by HP-20 and LH-20 column chromatography to afford crude soyasaponin and isoflavone fractions. The main A-type soyasaponin, acetylsoyasaponin A1 (AcA1), and the main B-type soyasaponins, soyasaponins I and II (I and II), in the crude fractions were identified by LC/MS analyses with authentic samples. The main isoflavones, daidzin, genistin, daidzein and genistein (DI, GI, DE and GE), in the crude fractions were identified by LC photo-diode array analyses with authentic samples. The contents of AcA1, I and II in the crude soyasaponin fractions and those of DI, GI, DE and GE in the crude isoflavone fractions were analyzed by reversed-phase HPLC. The average contents (mg/100 g) of AcA1, I, II and total of B-type soyasaponins in GM soybeans were 36.4 +/- 24.2, 51.2 +/- 11.8, 26.4 +/- 7.6 and 77.7 +/- 18.5, respectively, and those in non-GM ones were 22.3 +/- 14.7, 46.3 +/- 17.8, 19.8 +/- 9.1 and 65.9 +/- 26.9, respectively. The average contents (mg/100 g) of DI, GI, DE, GE and total isoflavones in GM soybeans were 93.1 +/- 15.5, 121.8 +/- 19.4, 0.073 +/- 0.178, 0.320 +/- 0.082 and 215.3 +/- 33.3, respectively, and those in non-GM ones were 78.8 +/- 34.6, 106.7 +/- 28.3, 2.206 +/- 4.468, 0.822 +/- 0.754 and 188.5 +/- 26.7, respectively. There were no statistically significant differences in soyasaponin and isoflavone contents between GM and non-GM soybeans. Therefore, it was estimated that the GM soybeans are equivalent to the non-GM ones in terms of the composition of the main secondary metabolites.     

Compact and power‐saving polysilicon data driver with common‐decoder DA converter (CD‐DAC)

Abstract— A common‐decoder architecture for a data‐driver circuit fabricated by using a polysilicon process has been developed. The architecture achieves a compact circuit and low‐power consumption. In application to an integrated polysilicon data driver for small‐sized displays, this architecture reduces the area of the data driver by removing the vertical bus lines that occupy a large area. It also suppresses the power consumption of the data bus by reducing the number of driven lines in the data bus during word‐to‐word transitions from six to two. By using a conventional 4‐μm design rule, we fabricated an active‐matrix OLED (AMOLED) panel with an integrated six‐bit data‐driver circuit with 384 outputs. The driver circuit had a height of 2.6 mm and a pitch between output lines of 84 μm. The maximum power consumption of the driver was only 5 mW, i.e., 3.8 mW for logic‐data transfer and 1.2 mW for reference‐voltage source. Furthermore, we also fabricated an active‐matrix LCD (AMLCD) panel including driver circuits of the same type as the integrated elements. Six‐bit full‐color images were successfully displayed on both panels.     

Computational dynamics method for evaluating the mobility of charged biomolecules passing through the electrical potential field within the ion selective channel on an excitable membrane

A mathematical method is introduced to characterize the electrokinetic behavior (electrophoresis) of a biomolecular particle which passes through a specific channel pore on an excitable biological membrane. The basic approach was first proposed by Booth (1950). The system was described by an equation of continuity and an equation of motion in which the driving force involves the diffusion effect, the hydrostatic pressure, and the electrostatic potential. By assuming linear relations between the velocity and the applied electrical field, solutions for the potential, pressure, and velocity were given by a series expansion of the charges on the particle. To examine the influence of ions surrounding the particle and forming an ionic cloud, the Debye–Huckel parameter was introduced. As the thickness of the double layer around the particle increased, the potential, velocity, pressure, and viscosity were changed significantly. The maximum influence was obtained when the radius of the particle became equal to the thickness of the double layer. Although this theory is valid for a charged, spherical, nonconducting particle only, the method is available for evaluating the kinetic behavior of a biomolecule that passes through a channel pore on a cellular membrane.This work was presented, in part, at the 8th International Symposium on Artificial Life and Robotics, Oita, Japan, January 24–26, 2003     

Mobile catabolic genes in bacteria

The recent findings of various mobile catabolic genes have provided some insight into the evolution of microbial degradation systems for xenobiotic compounds. The catabolic genes undergo marked genetic rearrangements due to their presence on transposons or association with mobile genetic elements. Bacterial catabolic transposons fall into three defined structural classes. Class I elements include catabolic genes flanked by two copies of insertion sequences. Class II elements carry short terminal inverted repeats and transpose by the replicative mode in which transposase and resolvase are involved. Conjugative catabolic transposons represent the third class of mobile genetic elements. They carry all the genes required for excision, conjugal transfer to a new host, and integration. This review focuses on the structures, functions and roles of the recently characterized catabolic transposons in bacteria. Also described are the mobile catabolic elements that share structural similarity with the pathogenicity and symbiosis islands.