Lattice parameter determination of a strained area of an InAs layer on a GaAs substrate using CBED

All the six lattice parameters (a, b, c, alpha, beta and gamma) of a strained area of an InAs layer grown on a GaAs substrate were determined without any assumption of the crystal lattice symmetry from the higher-order Laue zone (HOLZ) lines appearing in one convergent-beam electron diffraction (CBED) pattern. The analysis was performed with three steps. Firstly, the parameters alpha and beta were determined from the deviations of the HOLZ lines from the mirror symmetry perpendicular to the [001] direction. Secondly, the parameter c was determined from the distance between the intersections of the HOLZ lines, which have the same h and k indices but different l indices. Finally, the parameters a, b and gamma were determined simultaneously from several distances between the intersections of the HOLZ lines. The lattice parameters determined for the strained area were a = 0.611(2) nm, b = 0.615(1) nm, c = 0.6119(7) nm, alpha = 89.5(1) degrees, beta = 89.0(2) degrees and gamma = 89.1(2) degrees. This result implies that the cubic lattice of InAs is elongated approximately in the [111] direction and the exact lattice symmetry is triclinic. The same analysis procedure was applied to another two specimen areas. It was found that the areas have orthorhombic distortions with lattice parameters a = 0.607(2) nm, b = 0.604(1) nm and c = 0.6085(7) nm for one area, and with a = 0.607(2) nm, b = 0.605(1) nm and c = 0.6065(7) nm for the other area. It is should be emphasized that the present analysis of lattice distortions is immediately applicable to the other semiconductors, such as Si, SiGe or GaAs layers, without assuming any crystal system.     

Determination of captafol,cyhexatin, 1-naphthylacetic acid and quintozene in apple,Japanese pear and melon by simultaneous extraction

A simple and rapid method is described for the determination of the non-registered pesticides, captafol, quintozene (PCNB), cyhexatin and 1-naphthylacetic acid (NAA), in fruits. These pesticides were extracted with acidified acetone, then captafol and PCNB were purified with a Florisil mini column and analyzed by GC-ECD. Cyhexatin was ethylated with ethylmagnesium bromide, and the ethyl derivative was analyzed by GC-FPD (Sn filter). NAA was purified with liquid-liquid extraction and determined by HPLC equipped with a fluorescence detector. These analytes were identified with GC/MS or LC/MS. The minimum identified concentration of the pesticides was below 0.2 ng per injection, which corresponds to a detection limit of below 0.02 microgram/g in the original samples. Recoveries of the pesticides spiked at 0.1 microgram/g into apple, Japanese pear and melon were greater than 61%.     

Analysis and evaluations of logical instructions called in parallel digital optical operations based on optical array logic

The authors have analysed and evaluated a two-dimensional instruction set of parallel operation based on optical array logic (OAL), which is a digital optical computing paradigm, to clarify efficient composition of an optical computing system based on OAL. To evaluate parallel operation based on OAL, the author have introduced new indices and evaluated a logical instruction set of various parallel operations with the indices, so that a guideline for composing a simple and efficient OAL computing system is clarified. Also, the authors have proposed the reduced operation kernel set correlation technique to perform parallel operations more efficiently by a simple OAL computing system. It has been clarified that the technique can reduce the required hardware necessary for an OAL computing system for efficient general-purpose processing.     

Detection of characteristic signals from as-doped (<1 at.%) regions of silicon by transmission electron microscopy and convergent-beam electron diffraction

Characteristic signals were detected from As-doped (< 1 at.%) regions of silicon by dark-field transmission electron microscopy and convergent-beam electron diffraction. A slight intensity increase was observed in 220 dark-field images, which may be explained by an increase of scattering amplitude due to the As doping. The doped region showed a much higher intensity in 004 dark-field images. The characteristic high intensity was observed for specimens with As concentrations of about 0.09-0.8 at.%. Convergent-beam electron diffraction patterns obtained from the As-doped region showed a characteristic rocking curve for 004 reflection. These characteristics should originate from incoherent elastically scattered electrons due to a static lattice distortion around the doped As atoms. The observed characteristics in dark-field images and rocking curves of the 004 reflection should be a good probe not only for investigating the concentration of doped atoms in Si lattice, but also for the amount of impurity and/or point defects in other crystalline materials.     

External doses in the environment from the Tokai-mura criticality accident

On 30 September 1999, a criticality accident occurred at a uranium processing plant operated by JCO in Tokai-mura, Japan and the criticality remained for about 20 h. Almost all doses to the neighbouring residents were brought by neutrons and gamma rays emitted from the facility rather than fission products released to the environment. External doses in the environment were evaluated using radiation monitoring data and radiation transport calculation. A pattern of the dose rate evolution was modelled based on the records of gamma ray monitors in the JCO facilities. Relations between the ambient dose equivalent rates of neutrons/gamma rays and the distance from the facility were determined from the monitoring data obtained around the accident site. Conversion from the ambient dose equivalent to the effective dose equivalent was made assuming the energy spectra calculated by the radiation transport code, ANISN. It was estimated that the people who stayed outside the 350 m zone would receive doses of less than 1 mSv.     

Evaluation of 4-nonylphenols and 4-tert-octylphenol contamination of fish in rivers by laboratory accumulation and excretion experiments

Laboratory accumulation and excretion experiments of 4-nonylphenols (NP) and 4-tert-octylphenol (OP) were performed for killifish (Oryzias latipes). The bioconcentration factors (BCF, wet weight) in the whole fish were mean +/- SD of 167 +/- 23 (n = 4) for NP and 261 +/- 62 (n = 4) for OP. The biological half-lives in the whole fish were 9.9 h for NP and 7.7 h for OP. Parallel to the laboratory experiments, field survey on the chemicals contamination for water and ayu fish (Plecoglossus altivelis) from rivers flowing into Lake Biwa was performed. The contamination was not so high in agreement with the laboratory experimental data and the field BCF values (wet weight) in the ayu fish were 21 +/- 15 (n = 8) for NP and 297 +/- 194 (n = 3) for OP.     

Fabrication of (Pb,La)(Zr,Ti)O/sub 3/ thin-film arrayed waveguide grating

The design and fabrication of an 8-ch, 500 GHz-spacing arrayed waveguide grating on (Pb,La)(Zr,Ti)O₃ has been successfully achieved for the first time. An insertion loss of 22.1 dB, including a 10 dB coupling loss, and an adjacent crosstalk of -23.1 dB have been obtained. The device is expected to be monolithically integrated into high-speed optical switches to form integrated chips such as a reconfigurable add-drop multiplexer     

Surface wetting phenomena of plasma polymer-coated sheets of poly(l-lactic acid)/poly(butylene succinate)

Water-repellent surfaces were fabricated on blend sheets of poly(l-lactic acid)/poly(butylene succinate) with various blending ratios by the successive processing; (1) plasma etching, followed by (2) the hydrophobic plasma polymer coating. Rough morphology was formed effectively on the mosaic structured surface of blend sheets via the oxidative etching, and advanced water repellency was achieved after the thin membrane coating was synthesized with a hydrophobic plasma polymer coating by use of hexamethyldisiloxane or hexamethyldisilazane. High water repellency is expressed through the columnar hair-like structured model, where the air-water surface interaction in the voids is taken into account.     

Hypomagnesemia as a predictor of mortality in hemodialysis patients and the role of proton pump inhibitors: A cross‐sectional, 1‐year,retrospective cohort study

Introduction This study aimed to evaluate the association between proton pump inhibitor (PPI) use and serum magnesium levels, and the role of hypomagnesemia and PPI use as a risk factor for mortality in hemodialysis patients. Methods An observational study, including a cross‐sectional and 1‐year retrospective cohort study. The study comprised 399 hemodialysis patients at a single center, and was conducted from January to September 2014. Multiple linear regression analysis was used to investigate the independent relationship between serum magnesium levels and baseline demographic and clinical variables, including PPI and histamine‐2 receptor antagonist use. Cox regression model was used to identify lower serum magnesium level and PPI as a predictor of 1‐year mortality. Findings Serum magnesium levels were lower with PPI use than non‐PPI use (2.39 ± 0.36 vs. 2.56 ± 0.39 mg/dL, P < 0.001). Multiple linear regression analysis showed that PPI use, low serum albumin levels, and low serum potassium and high‐sensitivity C‐reactive protein (hs‐CRP) levels were significantly associated with low serum magnesium levels. A total of 29 deaths occurred during the follow‐up period. According to Cox regression analysis stratified by hs‐CRP, only high serum hs‐CRP levels (>4.04 mg/L) in association with low serum magnesium levels was an independent risk factor for 1‐year mortality (hazard ratio: 2.92; 95% CI: 1.53–6.40, P < 0.001). Discussion Serum magnesium levels are lower in PPI use. In the inflammatory state, a low serum magnesium level is a significant predictor of mortality in hemodialysis patients.     

Organometallic Bonding in an Ullmann‐Type On‐Surface Chemical Reaction Studied by High‐Resolution Atomic Force Microscopy

The on‐surface Ullmann‐type chemical reaction synthesizes polymers by linking carbons of adjacent molecules on solid surfaces. Although an organometallic compound is recently identified as the reaction intermediate, little is known about the detailed structure of the bonded organometallic species and its influence on the molecule and the reaction. Herein atomic force microscopy at low temperature is used to study the reaction with 3,9‐diiododinaphtho[2,3‐b:2′,3′‐d]thiophene (I‐DNT‐VW), which is polymerized on Ag(111) in vacuum. Thermally sublimated I‐DNT‐VW picks up a Ag surface atom, forming a C? Ag bond at one end after removing an iodine. The C? Ag bond is usually short‐lived, and a C? Ag? C organometallic bond immediately forms with an adjacent molecule. The existence of the bonded Ag atoms strongly affects the bending angle and adsorption height of the molecular unit. Density functional theory calculations reveal the bending mechanism, which reveals that charge from the terminus of the molecule is transferred via the Ag atom into the organometallic bond and strengths the local adsorption to the substrate. Such deformations vanish when the Ag atoms are removed by annealing and C? C bonds are established.