High-Speed X-Cut Thin-Sheet LiNbO3 Optical Modulator With Folded Structure

We propose a small-footprint X-cut thin-sheet lithium niobate optical modulator with high-speed and low-driving-voltage characteristics. Since an optical waveguide is folded by a mirror placed at one edge of the modulation chip, the chip can be shortened by about half. In addition, a wide modulation bandwidth can be achieved, because the path-length difference between the optical waveguide and the coplanar-waveguide (CPW) electrode is decreased to as short as possible by placing the CPW electrode as far as possible along the optical waveguide in the folded portion, and the microwave effective index is set to realize effective velocity matching between the lightwave and the microwave. A small footprint of 1.78 times 29 mm, a low half-wave voltage of 2.0 V at dc, and a 3-dBe modulation bandwidth of 20 GHz were obtained.     

ELECTROFORCED SEDIMENTATION OF THICK SLURRIES IN CONSOLIDATION REGION

It is shown that the settling rates of thickened slurries can be greatly enhanced by application of D.C. voltages. It is demonstrated that the settling rates increase remarkably with increasing electric field intensity. The basic differential equation for gravitational settling of thick slurries is derived and this is extended to electroforced sedimentation. The theoretical' settling rates and the porosity distributions in settling sediments of both gravitatinal and electroforced settling compare favorably with experimental observations. In addition, it is shown that the compression-permeability characteristics in the low compressive pressure region can be closely determined analytically by using batch sedimentation data.     

Hydrocracking of diphenylmethane and tetralin over bifunctional NiW sulfide catalysts supported on three kinds of zeolites

Hydrocracking reactions of diphenylmethane and tetralin were carried out over three kinds of zeolites with or without NiW sulfide to discuss the roles of catalytic bifunctionality in two types of hydrocracking reactions. It was found that strong acid sites were not needed for the hydrocracking of diphenylmethane, while the conversion of tetralin required relatively strong acid sites. Ultra-stable Y zeolite with strong acidity exhibited high hydrocracking activity for both reactions. In contrast, mordenite catalysts did not show high activity for either hydrocracking, though isomerization of tetralin and excess hydrocracking to gaseous products proceeded. The superior performances of ultra-stable Y zeolite in the tetralin hydrocracking were suggested to be related to the hydrogen transfer ability. In most cases, the loading of NiW sulfide enhanced catalytic activity. In the diphenylmethane hydrocracking, the role of NiW sulfide was found to supply active hydrogen to the hydrocracking active sites on zeolite and to prevent polymerization of benzyl cations. In the tetralin hydrocracking, the dehydrogenated products from tetralin were re-hydrogenated over NiW sulfide.     

A Microprocessor for Speech Recognition

A new single-chip microprocessor for speech recognition, the SRP, has been developed, utilizing a multiprocessor architecture and a pipelined structure. It can recognize up to 340 isolated words or 40 connected words in real time. The SRP contains a vector distance calculator, a DP-equation calculator, and an I/O controller operating in a pipelined manner. Algorithm variations and operation parameters are user programmable, and the total size of the SRP program for a typical speech recognition system is about 700 words. The device has been fabricated with n-channel Si-gate E/D MOS technology with 2.5 μm design rules and employs 7296 three-transistor dynamic RAM cells for a total of more than 40 000 transistors.     

Anodic acyloxylation based on the acid–base reactions between acetic acid or trifluoroacetic acid and solid-supported bases

We have developed a novel electrolytic system for anodic acyloxylation based on the acid–base reactions between acetic acid or trifluoroacetic acid and solid-supported bases. On the basis of the electrolytic system, anodic acyloxylation of organic compounds, which even have considerably high oxidation potentials, was successfully carried out to provide the corresponding acyloxylated products in moderate to excellent yields. Furthermore, it was found that silica gel supported bases are not only chemically stable under acidic conditions but also electrochemically stable and thus reusable for many times.     

Acceleration of calcium phosphate formation on bioactive PMMA-based bone cement by controlling spatial design

Polymethylmethacrylate (PMMA)-based bone cement is widely used for the fixation of artificial joints. However, it is not considered a bioactive material because it lacks the ability to induce a direct bond with bone. In order to improve the long-term stability of cemented fixations, the development of bioactive bone cements is desirable. An essential requirement of a bioactive material includes the induction of bone-like apatite on its surface within the in vivo environment. Previously, we prepared bioactive PMMA-based bone cements by a modification with water-soluble calcium salts and alkoxysilane. Because spatial design may enhance apatite formation on bioactive material surfaces in vivo, we aimed to evaluate the effect of spatial design on apatite formation on modified PMMA-based bone cements in simulated body fluid (SBF). We found that an appropriate spatial design shortened the induction period for the apatite deposition on the modified bone cements. It is expected that osteoconduction would be enhanced in spontaneously created gap between the cement and the host bone leading to tight integration.     

ARTS: Accelerated Ray-Tracing System

In this article we propose algorithms that address the two basic problems encountered in generating continuous-tone images by ray tracing: speed and aliasing. We examine previous approaches to the problem and then propose a scheme based on the coherency of an auxiliary data structure imposed on the original object domain. After investigating both simple spatial enumeration and a hybrid octree approach, we developed 3DDDA, a 3D line generator for efficient traversing of both structures. 3DDDA provides an order of magnitude improvement in processing speed compared to other known ray-tracing methods. Processing time is found to be virtually independent of the number of objects involved in the scene. For large numbers of objects, this method actully becomes faster than scan-line methods. To remove jags from edges, a scheme for identifying edge orientation and distance from pixel center to true edge has been implemented. The time required for antialiasing depends on the total length of the edges encountered, but it is normally only a fractional addition to the time needed to produce the scene without antialiasing.     

Nanosecond and femtosecond mass spectroscopic analysis of a molecular beam produced by the spray-jet technique

The spray-jet molecular beam apparatus enabled us to produce a molecular beam of non-volatile molecules under high vacuum from a sprayed mist of sample solutions. The apparatus has been used in spectroscopic studies and as a means of molecular beam deposition. We analyzed the molecular beam, consisting of non-volatile, solvent, and carrier-gas molecules, by using femtosecond- and nanosecond- laser mass spectroscopy. The information thus obtained provided insight into the molecular beam produced by the spray-jet technique.